If you have completely destroyed the brain of the device, then you can only help to replace the laptop processor for a more powerful. AMD is the second largest processor company. It is also the largest manufacturer of graphics processors. The products of this company are known for good performance and low price. The main competitor of the company is intel. AMD burst onto the market with the release of its first 6-core processor in 2010, which is designed to compete with the bestselling i5 and i7 models, and has taken the leading position. AMD lineup is very diverse. In his arsenal you can find a processor for almost all models of motherboards, and these components have a very wide price range. Every user can pick up according to his needs and size of the wallet.
Can a Laptop Processor be Upgraded?!
The second youth of your iron friend: how to replace the processor on your laptop
Let’s start with the most important part of the computer: the CPU. Today we will talk about how to replace the processor in a laptop of any brand. Asus, Acer, Dell, HP, Samsung, Lenovo, MSI, etc. д., more productive.
Preparing to replace the processor
To change your PC processor, you must first buy a new one, as well as buy thermal paste. It may be necessary, and even desirable, to buy a new heatsink and cooler, especially if the old ones may not cope with the cooling of a more powerful chip. After that, you need to disconnect the system unit from the power supply and carefully remove dust and various accumulated debris from it. You can use a vacuum cleaner. You may need to remove the video card if it interferes with the work. That’s all, that’s where the preparations end, all that’s left is to properly replace the processor on your computer.
Choosing a Part
Before replacing the device, another important task that directly affects the result obtained after the CPU replacement is the choice of the CPU itself. It is important to pay attention to these characteristics when buying a new processor:
- Socket Type. It must match the type of the old CPU model, otherwise it cannot be installed.
- Symbols in the name of the core.
- The thermal capacity or design power of the model: it must be equal to or lower than that of the “native” CPU, otherwise the cooling system will not be able to cope with the heat from the new processor, which will lead to a rapid failure due to overheating.
When choosing a more efficient model it is important for the user to consider the compatibility of the purchased processor with the laptop‘s motherboard. Study the information on the manufacturer’s website, focusing on the criteria of interchangeability at the technical level.
Replacing the processor on the laptop
Over time, the laptop can stop working quickly in necessary programs and games. This is connected with obsolete models of components, in particular the processor. Not always have the money to buy a new device, so some users manually update the components. In this article we will talk about replacing the CPU in a laptop computer.
The next step of the replacement is directly disassembling the laptop and installing the new CPU. Before doing this the user needs to update the BIOS. The procedure is different for various BIOS types therefore it will not be described here. If it is not upgraded, you may face the problem that the new chipset will not work. Sometimes it works, but not all the built-in technology will be supported, for example, the cores will not automatically raise the frequency.
Useful tip! Before replacing the chipset a new one is recommended to install the driver or a special program, which will connect to the internet and download everything you need. A good option for such an application is Driver Pack Solution.
Now the user needs to find a disassembly diagram of his laptop. You can find the appropriate video on YouTube, for this you need to enter in the search for a specific model, for example, Asus Zenbook 15 ux533fd. Ideally we recommend to specify the full marking, because Zenbook 15 series has different models with different devices and therefore different disassembly schemes.
To remove the chipset you need to completely disassemble the gadget. The CPU is hidden under the cooling system. Many users miss an important point. all the screws that hold the radiator are numbered. Unscrew them strictly in the order in which they are numbered, for example, from 1 to 8. when the radiator is put back in place, they should be screwed in reverse order from 8 to 1. In this case it is wrong to tighten the screw all the way to the stop, you should alternately half-tighten them slightly, and in two passes completely fix everything.
The CPU is held in its place by a small screw. Use a screwdriver to slowly unscrew it until the special mechanism pushes out the chipset. Now you should put a new one in its place and apply thermal paste. If there is old paste on the cooling system where it touches the chipset, you need to remove it with a tissue.
Important Note! When installing the chipset, you should look at the key. In one of the corners is a small triangle. Use this corner to place the chipset on the motherboard, which is marked with a similar triangle.
After installing the chipset and assembling the laptop should run the device, install the driver and check the functionality. The gadget should not only work, but do it quietly, without crackling or other unusual sounds (their appearance is possible if the radiator was installed unevenly), and in addition, it would be worth checking the temperature of the chipset. Use one of the utilities. CPU-Z or AIDA64.
Processor replacement procedure
So, the first step of the replacement was voiced above. you need to find out if you can change the processor yourself. If so, you should choose the appropriate chip from the compatible devices. To do this, you need to know what kind of motherboard your laptop has. This information can be obtained using Everest or AIDA64. Look at the chipset section of the motherboard, and then type on the internet what processor fits to this board. It is worth knowing that you should not blindly trust the information about compatibility from just any website, and it is better to double-check it on a third-party resource. However, the most useful information can be found on official resources. In my opinion the best processors are made by Intel and it is this company which you need to replace your old one. To choose a compatible processor, you can simply go to the brand site and search for information there. No known cases of incorrect information from Intel have been reported.
Once the processor is selected and purchased, you should proceed to the replacement procedure. Here is a nuance. the BIOS may not see the new processor, even if the motherboard should work with it. To prevent this, it is necessary to carry out the update procedure before replacing. BIOS update can be performed directly in BIOS itself, under DOS or in Windows. In the latter two cases, you need to know the motherboard, the type of BIOS and its current firmware.
After updating the BIOSA the processor is replaced. There should be no particular difficulties, if the user at least once cleaned the device from dust by himself. The notebook must be disassembled to the motherboard, remove the processor, remove the old thermal paste and apply a fresh one to the new chip. Then everything is assembled as it was. If the assembly is done correctly, then after rebooting everything will work.
Another useful tip to get the most out of the CPU is to update the driver. Modern Intel products have a lot of features that can significantly ease the life of the owner. However, not all of them work by default, and some situations will require fresh software and even the latest operating system updates. By the way modern processors work better with Windows 10, so if you have a new chip, you can also put the latest operating system.
- Check the type of the processor.
- We find out the model and manufacturer of the motherboard.
- We choose the compatible CPU.
- Update BIOS.
- Changing the CPU.
- Put a fresh driver and latest operating system updates.
How it is possible to replace the processor on the laptop on more powerful or working?
We find out whether you can replace the processor on the notebook. As we know, one of the main advantages of a PC is the ability to independently replace any part. In this respect, the laptop is inferior to its older brother. In fact, there are only three components you can change in a portable computer: the RAM, the hard drive, and the CPU. In this article we will focus on the last one. After all, it is the processor that is responsible for the power of the device. And if you replace the CPU on a more powerful, then you can “rejuvenate” your laptop this way.
It is worth noting that not every device can be updated. It all depends on the architecture of the specific model. Sometimes it can be soldered onto the board, as in the case of the Asus K50C. In this case the CPU replacement is not possible for this model. If it is in a special slot, then the replacement is possible.
Changing the Processor on Your Computer
You may need to replace the computer’s CPU if the main processor breaks and/or becomes obsolete. The important thing here is to choose the right replacement, and to make sure that it matches all (or most) of the features of your motherboard.
If the motherboard and the selected processor are fully compatible, you can proceed with the replacement. Those users who have little idea how the computer looks like from the inside it is better to entrust this work to a specialist.