Enter iPhone recovery mode

How to put your iPhone into recovery mode and get out of it

“What is iPhone recovery mode? Yesterday I connected my iPhone 6 to iTunes for the latest iOS 15 update, it said my iPhone was in recovery mode and I need to restore it. Now I can’t use my iPhone and it won’t respond. What does iPhone recovery mode mean? How to get my iPhone out of recovery mode? “

Have you ever encountered a situation where your iPhone hangs in recovery mode? You may not know anything about it until some errors occur. In fact, your iPhone will be in recovery mode during an update or restore. Sometimes you also need to put your iOS device into recovery mode to solve problems. This guide will show you what iPhone recovery mode is, and how to get your iPhone 5 / 5s / 5c / 4S / 6/7/8 / X / 11/12 into and out of this mode.

How to enter DFU mode on an iPhone with a physical Home button

All older Apple smartphones up to and including iPhone 6s and iPhone SE have a physical home button. On them, logging into DFU is done as follows:

Connect your smartphone to the computer with the cable.

When the screen goes dark, hold down the power button for 3 seconds.

Press the Home button while holding down the Power button.

After 10 seconds, release the power button and continue to hold the Home button for another 5 seconds.

Your smartphone’s black screen will indicate that you have entered DFU. The apple on the screen signals the start of loading iOS, you will have to repeat the procedure again.

To exit DFU mode, press the Home and Power buttons for 10 seconds.

How to enter iPhone recovery mode (DFU)

Our experienced team of editors and researchers contributed to the creation of this article and checked it for accuracy and completeness.

The wikiHow content management team carefully monitors the work of editors to ensure that each article meets our high quality standards.

Number of views of this article: 6483.

In this article we will tell you how to enable DFU (firmware upgrade mode) on your iPhone or iPad, which is the deepest recovery mode available on your iOS device. If you want to restore your device in DFU mode, everything on the device will be deleted and reinstalled, including the firmware that controls the hardware components.

See also  How to find a channel in a telegram on iPhone

Connect the device to your computer. To do this, use the cable that came with the device. Insert the USB plug into a USB port on your computer, and connect the 30-pin plug or the Lightning plug to the charging port of the device.

  • On the iPhone 7 and iPhone 7 Plus, which do not have a physical home button, press and hold down the volume down button located on the left side of the iPhone. [1] X Source of Information

Continue to hold down the home button or volume down button (iPhone 7/7 Plus). Do this until the message “iTunes has detected [device] in recovery mode” appears on the screen.

iPhone stuck in recovery mode, how to fix

There is a chance that your iPhone is stuck in recovery mode and will not come out after a software update or jailbreak or recovery. You can definitely use iTunes to fix this problem, but all the data on your iPhone will definitely be deleted if you use iTunes. A safer way in which all your data in your phone remains intact, using Tenorshare Reiboot. It offers one-click entry/exit to recovery mode. You can use this software as follows.

Open your computer/Mac/laptop, download and install Tenorshare Reiboot on it.

Connect your iPhone which is stuck in recovery mode to a laptop or PC and press ReiBoot on the main interface.

Even if your iPhone is stuck in recovery mode, it can be easily detected in this software, click on the highlighted “Standard Repair” option to start the recovery.

Download the firmware online and continue the repair process when ready.

Once the firmware package is downloaded to your computer, you can click “Start Standard Repair” to start the repair.

Once the recovery process is complete, your iPhone will reboot and successfully exit recovery mode. This is an easy way to exit recovery mode if you’re interested without losing any data.

enter, iphone, recovery, mode

It is very important to know about Apple’s recovery mode, as it is very important when performing certain operations on your iPhone, such as troubleshooting, Jailbreak or software updates. The guide above tells you how you can use recovery mode on different iPhone models, as well as how you can exit recovery mode if necessary. If stuck coming out of recovery mode, the best software to refer to Tenorshare Reiboot, which is highly recommended.

How to enter Recovery Mode on an iPhone with a physical Home button

The instructions come in handy for restoring firmware on iPhone 6s/SE and older devices.

Disconnect your smartphone from PC.

Press the Home and Power buttons for 10 seconds to quickly turn off your iPhone.

Quickly connect your iPhone to your computer with the cable before the system boots.

After a few seconds you will see iTunes indicator on your smartphone screen. Your computer should recognize your iPhone in recovery mode, and you will be offered to Update the firmware or Restore iPhone from backup.

Press the Home and Power buttons for 10 seconds to exit.

What is iPhone Recovery Mode

When you Google “What is iPhone recovery mode”, you can’t find a straight answer. All the related results tell you how to get your iPhone / iPad in or out of it. Even from Apple’s official website, the answer is still not found. In fact, iPhone recovery mode. Is just a way to restore to your iOS device. When your iPhone goes into this mode, you can restore a suitable backup and sync all your iOS data with it. Apple introduces iPhone recovery mode when you update or restore your iPhone / iPad / iPod, although you are unlikely to know that your iOS device is in this state. You can also use recovery mode to fix some iOS bugs.

See also  How to remove loaded from a computer on iPhone

How to put your iPhone / iPad into recovery mode

Apple is making some changes. In iOS 11/12, users can press and hold the side button (also called the power button or the sleep/wake button) and volume up/down buttons to activate the emergency SOS feature. Usually you should only use Recovery in the worst case. If you cannot restore or update your iPhone 8 or iPhone 8 Plus, recovery mode is necessary. Here we show you how to put your iPhone 8 or iPhone 8 Plus into recovery mode. Note that you will first get all your data on your iPhone 8/8 Plus when you restore it in recovery mode. Before performing this you better back up your iPhone.

Download FoneLab now to backup your iPhone / iPad / iPod files. In addition, it also restores data from the backup you made.

How to put your iPhone 8, iPhone 8 Plus, iPhone X into recovery mode

Step 1 Turn off your iPhone. Hold down the power button for 3-5 seconds and then slide to turn off.

Step 2 Connect your iPhone 8 or iPhone 8 Plus to your computer. Open iTunes.

Step 3 When the device is connected to your computer, you forcibly reboot the iPhone.

Step 4 Press and quickly release the volume up button. Then press and quickly release the volume down button.

Step 5 Finally, press and hold the side button (Power or Sleep/Wake button) until the iTunes logo appears on the screen.

Step 6 iTunes should prompt you to restore or update your iPhone. It’s up to you to decide. iTunes will try to reinstall iOS on your iPhone 8 or iPhone 8 Plus. If the download takes more than 15 minutes, iPhone will exit recovery mode. Don’t panic, let the download complete and then repeat these steps again.

Step 7 Once the update or restore process is complete, set up your iPhone 8 or iPhone 8 Plus.

Note: If you accidentally put your iPhone 8 or iPhone 8 Plus into recovery mode, don’t panic, you can get out of recovery mode without having to restore or update your iPhone. Simply disconnect your iPhone from your computer and press the side button to reboot it.

How to put iPhone 7 and iPhone 7 Plus into recovery mode

The way to enter iPhone 7/7 Plus recovery mode is the same as above. iPhone 7 and 7 Plus replaces the home button with a 3D touchpad. This way, you can press the side button and volume down button to put your iPhone into recovery mode.

enter, iphone, recovery, mode

How to perform recovery mode on iPhone 6s and t. Д. (Including iPhone SE)

Step 1 If iTunes is open, close it. Connect your iPhone to your Mac / Windows computer with a lightning cable, then run iTunes.

See also  How to transfer WhatsApp from android to iPhone

Step 2 Force a reboot of your iPhone: press the sleep/wake button and home buttons. Don’t release them and keep holding them until you see the recovery screen (the screen with the iTunes logo).

Step 3 In iTunes, you will get an iTunes message with the options to “Restore” or “Refresh”. Choose which function you can perform now. You were able to put your iPhone into recovery mode.

Step 4 After that, set up your iPhone.

How to put your iPad into recovery mode

The way to put the iPad into recovery mode is also not different from the iPhone 6s. One small difference, you should know that on the iPad the Sleep / Wake button is in the upper right corner. So you simultaneously press that Sleep/Wake button and the Home button in the center below, while keeping your iPad connected to your computer, which has the latest version of iTunes installed.

When you see the iTunes logo, your iPhone can enter recovery mode.

Putting iPhone 11/XS/X into DFU mode

As durable and reliable as the iPhone 11/XS/X is, some users manage to put their smartphone into an inoperable state. It remains to try to restore the smartphone, putting it into DFU mode.

DFU or Device Firmware Update mode is the mode of updating the firmware of a device. Smartphone in DFU shows a blank black display and does not respond to pressing control buttons. Operating system itself does not even boot.

To activate DFU on the iPhone 11/XS/X you need to:

  • Connect your smartphone via wire to a PC or laptop with iTunes installed.
  • Press the volume up.
  • Press to decrease the volume.
  • Hold down the lock key for 10 seconds, wait until the display is completely black.
  • While continuing to hold the side button, hold down the volume down button for 5 seconds.
  • While continuing to hold down the volume down button, release the lock and wait for 10 seconds. If done correctly, the indicator will be the remaining completely black screen. Some text or logo (Apple or iTunes) may appear if you got it wrong somewhere.
  • Remains to open iTunes on computer. The message “iTunes has detected an iPhone in recovery mode. You must restore the iPhone before it can be used with iTunes”. This will prompt you to restore the iOS operating system on your device.

You can return from iPhone 11/XS/X mode in the following way:

  • Press the left top button.
  • Press the bottom left button.
  • Press lock button until Apple logo appears on the display.

Most of the above procedures are needed to get any of the iPhone 11/XS/X working again. Of course you can do it all yourself, but if you want to rely on professionals, follow this link to iLab Service Center. We’re sure we can repair your iPhone 11/XS/X and get it back in working order.