how to access the internet from your phone. How to connect mobile Internet MTS on the phone?

How to connect to another phone‘s mobile internet?

Set up another device to connect to the network via Bluetooth. Swipe your phone screen from top to bottom. and hold it down. Turn on your Bluetooth modemImportant!

  • Connect your phone and the other device with a USB cable
  • Swipe the phone screen from top to bottom.
  • Click the “Access Point” icon.
  • Turn on USB-modem.

How to use WhatsApp Web on another phone?

How to access WhatsApp Web from your cell phone

  • Open the browser
  • Open WhatsApp Web
  • Tap the three dots in the upper right corner and select the site for the PC
  • Use a second cell phone
  • Tap the three dots in the top right corner and select WhatsApp Web
  • Scan the QR-code from the browser on your first cell phone into the WhatsApp application on the second cell phone.

How to log into the internet from your phone

If you urgently need to access the Internet and do not have a computer handy, the easiest way out is to use a cell phone. Now in all phones and each operator has similar possibility of an exit in a world network.

Sponsor PG Article “How to Log In to the Internet from Your Phone” How to connect your phone to the Internet via computer How to turn off the Internet on your phone Beeline How to connect a laptop to the Internet via a cell phone How to connect free Internet on your phone for MTS How to connect the phone Internet on MTS

Cell phones have different interfaces, but the general scheme is the following: Go to the main menu of your cell phone

Choose menu “Browser” or “Internet” connect to the internet (in many models connection is automatic)

If you have just purchased a SIM card, your first attempt to get online will be unsuccessful. It is necessary to exit from the application, after which, as a rule, within 15 minutes the mobile operator will send you the instructions for setting up your device by SMS.Be careful! If the operator sent you an activation code, login or password, be sure to save it for later use

As soon as you used operator prompts, and your telephone is ready for network connection, do all above mentioned steps again

In menu “address bar” (the name can be different in different models) type the necessary address, for example www.russia.Press “ok”.

If you are connected through wi-fi, then in the menu of your telephone find the appropriate section.Press “activate”, enter the password if necessary.

See also  How to remove balance from the iPhone screen

Only after this, you can enter the address of the desired site.

Also many phone models offer additional possibilities to use the Internet: the phone remembers the page which was opened last, it is possible to create “bookmarks. The most visited sites and more.

How to get into darknet (iPhone)

You won’t be able to enter the darknet (darknet) from your iPhone without special applications.

Standard search engines do not find data stored on darknet sites, so you will need to install a TOR browser or other applications based on its principles. And maybe add other features to improve safety and anonymity when visiting darknet sites and directories.

TOR stands for The Onion Router, and the program itself is familiar to users by its onion-shaped logo.

You can use your iPhone (iPhone) to track darknet websites:

Its installation is standard, and developers guarantee security: your IP will be hidden when visiting sites.onion and darknet.

The program works based on TOR and provides security and anonymity, but it is paid. You have to pay 1.99 to be able to use it.

access, internet, your, phone, connect

If you’ve accessed the darknet with your iPhone. then you should know that the speed of seeding in the darknet leaves much to be desired.

The reason is that the traffic is complicated by the fact that TOR tries to provide users with maximum anonymity. Slowdown is observed in all browsers, which are based on Onion router.

Internet Setup Guide for Popular Mobile Phone Brands

If we consider popular phone models from manufacturers Samsung, HTC, LG Electronics, Lenovo, Sony, Meizu, Nokia, Fly, BQ, Maxvi, Micromax, ZTE, Alcatel, Vertex, it is noticeable that they all run Android. So the answer to the question of how to turn on the Internet on your smartphone One plus, will be the same as for a typical smartphone “Samsung” or for Sony Xperia, and it does not depend on the version of the operating system. Only some of the words and wording may be different, but the setting is the same.

How to distribute Internet from Samsung Galaxy via Wi-Fi

The easiest way to share the Internet from your phone via Wi-Fi to your computer, laptop, tablet or other smartphone. Keep in mind that only mobile Internet (received from the service provider) can be distributed via Wi-Fi, the process itself looks like this:

access, internet, your, phone, connect
  • On your Samsung smartphone, go to Settings. Connections. Mobile hotspot and modem.
  • At the top, turn on “Mobile hotspot”. If you’re told that you need to turn off Wi-Fi to do this, agree (since we can’t give away your existing Wi-Fi connection this way, as I mentioned above).
  • In order to change the network name, find out or change the password, click on “Mobile hotspot” and specify the necessary data instead of the standard.
  • You can then connect to the wireless network you’ve created from any other devices and use your phone’s mobile Internet from them.
See also  How to connect a htc to your TV

A few nuances, which may be important in the context of distributing the Internet via Wi-Fi from the phone:

  • Don’t forget that the Internet requires the mobile Internet to be connected and active.
  • Some mobile operators block the possibility to give mobile Internet from the phone to other devices at some tariffs.
  • If you need to quickly connect another phone to the Internet, you can tap the QR code icon at the top right in your Samsung mobile hotspot settings and scan the generated code with another smartphone.
  • If you have limited traffic at your tariff plan, take into account that you can quickly use up the traffic by connecting your PC or laptop to the created access point (for example, if the OS starts downloading updates).

What is APN in a cell phone?

APN (Access Point Name) is the conditional name of the mobile operator’s GPRS/3G access point, through which the user is connected to data service (WAP, Internet, MMS). Stable operation and service tariffication depend on correctness of APN setting. Setting up the APN on the GPS tracker is usually easy via SMS commands.

In order to set up mobile Internet, it is necessary to enter the following parameters into the phone menu:

  • Profile name or Profile name. mts-internet.
  • Data channel or Data bearer. GPRS.
  • Access point or APN. mts.
  • Enter your user name, i.e. User name. mts.

How to access router settings from your phone

  • Connect ISP cable into router port, which is called WAN or INTERNET. It is often highlighted in a special color and differs from the rest of the ports (LAN):
  • Turn on Wi-Fi on your phone. To do this on your iPhone, you must go to “Settings”, select “Wi-Fi” and turn it on: Although, on modern iPhones Wi-Fi is always enabled by default and you are unlikely to need this item. In Android, pull the curtain, press and hold your finger on the Wi-Fi icon: and also make sure it’s on:
  • Connect to your router’s network. Depending on the router manufacturer, the network name will be different: D-Link might be dlink, or for instance dir300nru; a modern TP-Link’s default SSID will be something like TP-LINK_A0816A (where the second part of the name is the last 6 characters of the MAC address).
  • Enter your Wi-Fi network password (t.н. security key) and click “Connect”: Here again, it all depends on the manufacturer. If you have a TP-Link router, use the PIN on the sticker: If the default network has no password, you will connect without entering the key.
  • Important! Now turn off the mobile internet on your phone, because if the internet is not yet set up on the router, your phone will try to access the network via mobile data and you won’t be able to access the 192.168.0.1:
  • Open the browser on your phone. For example Chrome.
  • Enter the IP address or site name of the router that is listed on the sticker in the address bar and press enter. For example http://192.168.0.1 Attention! If you can’t open the settings with the IP address printed on the sticker, check out our article How to get the IP address of your router from your phone.
  • Enter your username, password from the same sticker and press LOGIN or LOGIN. Make sure you enter the login info with a small letter: On old TP-Link router firmware, the login screen may look like this: If you successfully enter the router’s settings from your phone, you should see this screen:
access, internet, your, phone, connect

After changing settings such as network name, network security key from your phone (iPhone or Android) you will have to reconnect to the network each time. I recommend this sequence of actions:

  • Go to Wireless mode.
  • Change your Wi-Fi network name to your own.
  • Click Save.
  • Connect to the network with the new name but using the old password (in our case the password from the sticker).
  • Go to Settings again at the same address (for example, 192.168.0.1).
  • Go to “Wireless Security”.
  • Select the WPA2-PSK security type.
  • Set the AES encryption algorithm.
  • Enter your PSK password (aka “Wi-Fi password” and “wireless security key”):
  • Click save. You will disconnect from the network again.
  • On your phone, find your network in the list. Click on it and enter the new key you just set. At this point, you may encounter an error when your smartphone or tablet stops connecting to the network and it says “Saved”, “Authentication” or “Authentication Error” under its name:
See also  How to find out your account by phone number

If this happens, long press on the Wi-Fi network name and select “Forget network” or “Delete this network”: The network profile with the old password will be deleted from the phone, you will be prompted to enter the password and you will be able to connect normally: