How to change the RAM on the ASUS laptop

How to increase RAM on a laptop?

Laptops have long been significantly more popular than stationary computers. They are more mobile, occupy much less space and easier in operation.

A laptop can easily work out for several years with almost no failures, but its main minus is an almost complete absence of the ability to increase performance. However, one of the parameters of a portable computer, which can be changed relatively simply, is the amount of RAM. But before that I recommend that you try to clear the RAM of garbage.

Any user can easily increase the laptop‘s RAM, and as part of this issue, we will consider how to do it.

You can watch a video on how to increase RAM on a laptop or study the article below.

Replacing RAM in the ASUS N53SV laptop

Consider how to replace RAM in the ASUS N53SV laptop.

The laptop has four slots for RAM designed to install up to 32GB RAM DDRIII RAM. Elpida modules are installed here, in the photo you can see the designations:

Asus ROG Zephyrus G14 GA401 How to upgrade RAM memory

Step 1: Turn off the power supply and remove the battery:

Step 2: We find a service compartment, the one that is larger. Its cover holds two screws hidden under rubber legs. Put it with a thin screwdriver with an elastic band and half peel it off, so that you would be able to unscrew the screw. After twisting the screws, remove the lid, simply shifting it a couple of centimeters in the direction of the yellow arrow:

Step 3: Under the lid, we find RAM slots. In my case, three of the four slots are occupied. Scarves are held in the connector with a spring clamp. To remove cells, you just need to dilute the springs on the sides, in the direction of the shooter. The shawls will be raised at an angle of about 30 grade to the motherboard and after that we simply extract them in the direction of the yellow arrows:

We replace the memory with a new one and collect everything in the reverse order.

On our site you can find other materials on how to disassemble the ASUS laptop, a list of all records regarding the maintenance of laptops of this manufacturer will be available on the specified link. According to the following links, you can switch to the relevant entries regarding the maintenance of ASUS N53SV:

It would be very interesting for me to know what question you came to the site and whether you managed to find an answer to your question here? I would be grateful if you share this article on social networks:

Is it possible to change the configuration of the RAM without loss of warranty and in what cases

Above, we described the ways to change the configuration of RAM without physical intervention in the “filling” of the laptop. However, many laptops have the possibility of physical expansion of RAM by installing additional RAM planks.

But it should be remembered that resorting to such techniques on their own in most cases implies deprivation of the right to warranty service. To prevent this, to install additional RAM boards, you should contact the official service center.

At the same time, the methods of expanding the RAM described above do not affect the guarantee. In addition, there are laptops whose manufacturers officially allow owners to independently conduct an iron upgrade even on new products.

To expand the amount of memory on the laptop, without losing a guarantee, you must contact the service center

Therefore, it makes sense to study their warranty obligations in advance before performing any actions that imply any radical interventions in the design and hardware component of the PC used.

Step.By.Step instructions for increasing the amount of RAM in the ASUS laptop

Example with the installed RAM in the compartment under the lower panel

Before installing additional memory, turn off the laptop from the network and the battery.

Unscrew the screws on the rear panel of the laptop and remove the lid.

For reference. Some models provide an additional installation of memory planks. In Fig. 1 shows a free slot. If additional connectors are not provided, it is necessary to replace the existing bar of memory of another, larger volume.

Set the memory bar in a slot at an angle of 45 degrees, relative to the motherboard, and snap in a landing place, rice. 2

Further, all components are collected in the reverse order. After starting the operating system, the installed memory will be discovered automatically.

Example with the installed RAM under the keyboard

For access to memory, you must carefully remove the keyboard. For this purpose, unscrew the screws or release the latches that fix it.

Then gently raise the keyboard. If it is inconvenient to work further, you can disconnect the train from the motherboard and remove the keyboard completely.

See also  How to set up your laptop as a router

On a plate covering the RAM, it is necessary to unscrew the screws, raise and carefully pull the bar out of the slot.

In the freed slot, install another bar of a larger volume.

If RAM is located under the motherboard

change, asus, laptop

It is necessary to initially remove the compartment with the drive. HDD or SSD disk, unscrew the motherboard and turn off all the connectors from it.

On the back, under the protective film, there is a memory slot.

Raise the film and replace the memory plank in the above way.

Attention ! This article is not a guide, instructions, etc.P. It is described here how this is done, and not how to do it. Any handling of technology requires experience and knowledge. Read, analyze, draw conclusions. And to experiment yourself or contact specialists is your personal choice.

In the laptop (if it is available), a certain amount of RAM (Random Access Memory) is installed, in the norrodia called “RAM” or “Brains”. These same “brains” are modules that are present in the laptop. As a rule, in the laptop there are two slots for these modules, less often. One. They can be added, reduced, combined by volume, ultimately achieving the necessary volume of “RAM”. Low computer performance with the simultaneous operation of several programs is a sure sign of a small amount of RAM (RAM). This is due to the fact that the processor is not enough space for storing information about processed operations. Fortunately, adding RAM to a laptop is not a complicated process, and any user can do it on its own. But, before going to the store, you need to know which type of memory is suitable for your computer model.

There are three varieties of RAM: DDR, DDR2, DDR3. The first DDR is no longer relevant and today only DDR2 and DDR3 are used

Any laptop or computer can support only one of these types. They differ in frequency, data exchange rate and a cut on the bar in the contact area, so that it is impossible to insert an unintentional type of memory into the slot. Find out what type of DDR is supported by your laptop, you can from those. Passport, read the sticker on the memory module that is already installed at the moment, or use one of the many programs determining the technical characteristics of the computer. If you have difficulties at this stage, then it is better to consult a specialist.

Remember that the amount of memory that you can deliver also depends on the discharge of your processor. If you have a 32-bit processor and an appropriate operating system, then more than 3 GB of memory will not be involved in the laptop. In order not to have these restrictions, you need: a 64-bit processor and a 64-bit operating system.

To increase the amount of RAM, we need to be tired of an additional module (pre.Acquired) in a free slot. The question immediately arises: “Where to look for this slot?””. Memory slots are on the motherboard laptop, usually from below. It happens that the slots are located on top (under the laptop keyboard). Consider both options:

Option 1. Adding RAM if slots on top.

“Passenger Rabbit” We will have a laptop ASUS A2500H with a type of DDR RAM. It has only 256 MB RAM and his memory slots are on top. If you perform such operations with a laptop yourself. Take it a rule to start the battery to start.

Option 2. Adding RAM, when slots from below.

Now consider a simpler way to add RAM when the memory slots are below. For example, take the Acer Aspire 5315 laptop with DDR II memory. Here he is a handsome man:

The choice of memory

Type, and the maximum amount of memory supported by your laptop, you can find out using a special program like AIDA 64 or on the official website of the laptop manufacturer. Memory type can be SDRAM, DDR, DDR2, DDR3, DDR4, etc. D., Therefore, you need to install the type of memory he supported by the laptop. Each type of memory has a range of frequency of its work, there are modules with a lower frequency of work, but there is with a higher one, you should not install a memory with a higher frequency of work in the laptop than the supported by it, this can lead to unstable work, although most likely, most likely will work normally (at a low frequency). You can read more about choosing memory here.

Installing in a laptop, the volume of memory is greater than the supported in the laptop also does not cost. In modern laptops, most often there are two memory slots, the set of memory is better divided between these two memory modules, the article on the link above tells why.

How to replace RAM in a laptop

A warning! If the laptop has recently been bought by you in the store and a guarantee still extends to it, then opening the cover on the bottom and replacement of the RAM can serve as a reason to stop the warranty. To save the warranty, you will have to contact authorized service centers.

Based on the above, we conclude that to replace the RAM in the laptop, you need to find out the characteristics of the motherboard, unscrew the lower cover and see what has already been installed in the laptop and what can be improved. Then we buy modules of the suitable type of RAM, turn off the power, take out the battery and change the RAM modules ourselves.

See also  How to change emoji icons on Samsung. How to update your Samsung keyboard?

To get the installed strips from the slots, it is necessary to click the latches on the sides and calmly get the strips on the sides, without touching the gilded contacts inserted into the slot. It is also easy to insert new strips into the slot when the locks are clung, stop pressing and simply check that the strips are exactly.

After replacing the modules, collect everything back and turn on the laptop. To make sure that everything is fine, we start the CPU-Z utility again, or open my computer, click on the right mouse button in the free area and select the properties. In the window that opens in the System section, opposite the set memory (RAM), we see an affordable memory volume. There is nothing complicated in an independent replacement of the components of the laptop, but if you are still not confident in your abilities, you can watch the next video from Toshiba, which shows how elementary everything is.

change, asus, laptop

Acquisition of suitable memory

Check what amount of RAM is installed on a netbook of ASUS EEEPC. The volume of the operational memorable device (RAM) can be calculated in several ways:

  • Turn off the laptop, click the “F2” button, this will allow you to go to BIOS. In the System Memory tab, opposite the Installed Size inscription, the volume of memory will be written.
  • If you have a Windows operating system, then go to my computer, click on the empty space of the opening opening with your right button, thereby calling the context menu. Click on the “properties”; In the window that opened opposite the set memory (RAM), the amount of RAM will be indicated.
  • Launch the command line on behalf of the administrator, in the window opened, write down the command “WMIC Memorychip Get Manaufacturer, Capacy, Partnumber, Speed, Devicelocator”. 5 columns will appear:
  • Capacy is the volume of RAM in bytes (the first digit of this number is the volume in GB, if the first digit 0, then the first first digits);
  • Devicelocator. Shows a list of slots in which memory cells are installed;
  • Manuapacturer is a manufacturer;
  • Partnumber is a serial number of your RAM assigned to it in production;
  • Speed ​​is a clock frequency of the cell.
  • If you have the Linux operating system, then enter the Demicode on the command line. Type 17. Opposite the Size inscription will be the amount of RAM, opposite the Serial Number inscription will be a serial number assigned to the production.
  • If you have an operating system based on Linux, for example Xandros, in the “setting” tab, find the “System Info” section, it contains Memory Size information about the volume of RAM.

Standard for the type of ASUS. DDR3 laptop (not for PC), memory of another type is not suitable in the RAM slot. Select how much memory is needed, 1 GB or 2 GB. Do not put a memory bar for more than 2 GB, the system will not read it. In standard assembly, memory volume is 1 GB.

For an upgrade of netbook, it is worth buying a big memory that is by default. This does not apply to video memory, it is sewn into the video card. Also, this does not apply to the hard drive, because it is a device for long.Term storage of information, and not for temporary processing.

How to install RAM in a laptop

The situation from the computer to the computer may differ. Typically, laptop manufacturers provide for the possibility that the user will want to replace the RAM. Therefore, they make access to it as simple as possible.

Most often it is not required to disassemble the entire computer. To get to the memory slots, just remove a separate cover.

It is important to understand that if the laptop is still under warranty, then when replacing RAM in it, the guarantee subsides.

change, asus, laptop

To replace RAM in the laptop, you will need:

  • Turn off the computer completely. Then remove the battery from it (if it is possible without interference in the device case);
  • Next, using a screwdriver, remove the lid under which the RAM connectors are located. If it is difficult to determine where the RAM is, or it is not clear how to remove the lid, we recommend that you contact YouTube. To do this, enter the corresponding request for your laptop model. Most likely, on the video hosting you will find the necessary instructions;
  • Next, remove the memory modules, or install additional. To remove the modules, usually it is enough to jerk off the latches located on the sides;
  • When installing new memory modules, insert them tightly so that they do not “hang out” after fixing with latches. After installing new RAM modules, close the lid and turn on the laptop. After that, it is recommended to check the methods indicated above whether the new RAM is determined by the computer.

Alternative methods

In addition to the physical increase in RAM by buying additional modules, you can also use alternative methods.

There are several options at once on how to increase RAM on your laptop, without buying additional RAM planks.

Now separately about each of the presented options.

One of the alternative methods of how to increase RAM on a portable computer is to use the settings in BIOS.

change, asus, laptop

It does not matter which version of the operating system is installed on the laptop, whether it is already unsupported Windows 7, or the current Windows 10. If you need to increase the missing RAM on a portable computer, you need to do the following:

  • Depending on the laptop model, pinch the key or a combination of buttons when you turn on the laptop to enter the BIOS;
  • Sign in;
  • Open a section where all integrated devices are spelled out;
  • Find a parameter called Vga Sharing Memory, or with a similar name;
  • Choose a new value for RAM in the framework of the permissible;
  • Save the changes made;
  • Send a computer to reboot.
See also  How to know how many video cards are on your laptop

Here it is worth focusing on one problem of inexperienced users. Many of them set maximum values, which leads to serious and potentially dangerous consequences.

It is important to remember that increasing the parameters is allowed no more than 2 times compared to standard values.

This will be the optimal setting. Due to this, performance and speed of operation rise, but the equipment itself will not fail ahead of schedule due to increased load and intensive wear.

A removable flash drive

You can also increase the volume of RAM missing on a laptop using a conventional flash drive.

The point is that the drive will be used as a swing file. Only he will be on a removable medium, and will not use and give a load on a hard drive. Not the worst option to increase RAM, that is, RAM, using Windows 7 or more recent options for the operating system.

According to the users themselves who tested this method, the easiest way to increase the memory of the RAM on Windows 10 due to flash drives. Allegedly on this operating system, Ready Boost technology works better. But this is a controversial statement, since the technology of RAM increase is available on all versions of the OS, starting from Windows 7, and there is no need to talk about some global difference in its work depending on the operating room.

Before you talk in stages about how to increase the operational missing memory of your portable computer due to the external drive, you must make sure that there is such an opportunity specifically in your case.

For this, it is important that the equipment used meets several requirements. Namely:

  • On the laptop, the operating system no older than Windows 7 should be installed, which makes this option for expanding the RAM on Windows Vista and XP impossible;
  • The flash drive itself should have a volume of at least 1 gigabyte;
  • Flash drive 3 mb/s and more.

Now finding portable computers with Windows XP or Vista is quite difficult. And the most budget flash drives easily fit into the minimum requirements.

Accent should also be made on several important points:

  • If you have a 4 GB flash drive at your disposal or more, pre.Format it in the NTFS standard.
  • Choose a removable drive, the volume of which is 2-3 times larger in comparison with the current parameters of RAM. If RAM has a regular 4 GB of RAM, then take the flash drive by 8-16 GB.

If all these conditions are met, then you can begin to expand the RAM at the expense of the flash drive.

This will need to be done the following:

  • Prepare a flash drive, format it as necessary;
  • Connect to a free USB part;
  • Wait for auto.Start;
  • Click on the point “accelerate the operation of the system”;
  • If the auto.Launch did not appear, through my computer to open the properties of the removable drive;
  • Open a tab called Ready Boost;
  • Note with a tick the item “Provide this device”;
  • Select the appropriate volume to expand the RAM;
  • Press on “apply”;
  • Complete the changes with the OK button.

In such a simple way, you can use a flash drive as a swing file without using the resources of the hardest disk. But you should not expect a similar effect from such actions, as when installing new RAM modules.

Help from a hard disk

You can also expand the RAM at the expense of a hard disk. And to do this is not as difficult as some seem to be.

Starting from the Windows XP version, on laptops and PC, the following operating system appeared such as virtual memory. In fact, this is part of a hard disk that is used as help for RAM. Когда базовой ОЗУ оказывается недостаточно, подключается выделенная область, и оперативная память за счёт этого увеличивается.

Many have heard about such a concept as a pumping file, but did not encounter virtual memory. In fact, these are one and the same, only the names are different.

If the option with the purchase of a new user’s RAM does not suit the user, he is afraid to change the settings in BIOS, and I don’t want to distinguish a whole flash drive for expansion, then there is only an option with an extension of memory due to part of the space of the hard disk.

How to upgrade RAM memory in Asus ZenBook UX310 laptop

To achieve the desired, you need to take such steps:

  • Press the computer icon with the right button and select the “Properties” menu;
  • Open a section with additional parameters;
  • Click on the item “Additionally”;
  • In the speed segment, press the “Parameters” button;
  • Then again to the item “Additionally”;
  • And now on the “Change” button.