How to change the strap on the Apple Watch

How to change the Apple Watch strap

How to change the Apple belt, watch. Over the past few months, he bought his first Apple Watch And he started using it almost every day. However, now that you’re tired of using the same strap all the time, you want to take it off and replace it with another.

In today’s lesson, I’ll show you how to do this, in detail and easily. So, read on to find out how to remove the old strap from your latest generation watch and put the one you like better. Act.

Instructions for replacing the strap on your Apple Watch

So, to replace it, you need to do the following steps:

  • Put the Apple Watch on a clean, soft and smooth surface (a microfiber cloth will do).
  • Press the disconnect button and hold it down. In doing so, slide the strap down or up first and then gently remove.
  • To install a new strap on your watch, use the same technique. you just need to insert the connectors of the new strap into the grooves of the watch.

The important thing is that you don’t need to make a lot of effort to change. If you cannot remove the strap easily, try pressing and holding the watch button again.

How to Remove an Apple Watch Strap?

To remove the Apple Watch strap, place the gadget face down on a clean, soft surface to prevent scratches. On the back of the case you will find two buttons on the 2 band inserts. These are the strap release buttons. Holding one of the buttons, slide it across to remove it. To replace the watch strap in the correct position, start with the buckle part.

See also  Where is email on your phone

Put the new strap on by inserting and sliding the adapter sideways until you hear a click: this locks the strap in the correct position.

It should be in the center of the case to be locked. If you do not hear a click, try gently moving the strap to the left or right until you are sure it is locked. If you are not sure, press the button, remove the strap and try again.

Do the same with the other part of the strap and with the other button. Slowly rock the strap up and down to make sure it doesn’t slip.

How to remove the Apple Watch strap

Before you can experiment with different Apple Watch straps, you need to know how to remove the strap from your watch.

  • Remove the Apple Watch from your wrist.
  • Place or hold the Apple Watch face down. Be careful not to scratch the screen.

Pro tip: Every time you change your Apple Watch strap, you may want to take the opportunity to clean the Apple Watch strap and possibly the watch itself. To learn more about the Apple Watch, sign up for our free Tip of the Day newsletter.

Instructions for replacing the strap on your Apple Watch

So, to replace it, you’ll need to do the following steps:

  • Place the Apple Watch on a clean, soft and smooth surface (a microfiber cloth will do).
  • Press the disconnect button and hold it down. In doing so, first slide the strap down or up, and then gently remove.
  • To install a new strap on your watch we use the same technique. just slide the connectors of the new strap into the grooves of the watch.
See also  How to change the watch face on honor band 5

It is important that you do not have to exert much effort to replace it. If you can’t remove the bracelet easily, try pressing and holding the watch button again.

change, strap, apple, watch

Do the straps and bracelets from older versions of the Apple Watch fit the new models?

Yes! For example, the bands from the very first Apple Watch and Apple Watch Series 1, 2, and 3 will work just fine for the Series 4, Series 5, 6, SE, or 7. All bracelets for 38mm, 40mm, 41mm, 44mm, and 45mm cases are fully compatible with each other.

Organize your workspace. To avoid scratching the screen, the Apple Watch should lie on a clean surface, such as a soft mat or microfiber. The watch face should be facing downwards.

To remove the bracelet or strap, press and hold the release button located on the bottom of the Apple Watch. Hold it down and slide the bracelet itself to the side. In case you plan to replace the block bracelet, go to the following instructions.

change, strap, apple, watch

If that doesn’t work, press the lock button again and make sure you hold it down as you move the bracelet to the side.

Strap removed! Repeat the steps for the second part of the strap.

Installing the new strap is just as easy: you just need to insert the connectors of the new strap into the appropriate slots on the Apple Watch. In doing so, the writing on the strap should be on the outside.

How to change the strap on an Apple Watch

This article was written by Jack Lloyd. Jack Lloyd. Technology wikiHow article author and editor. He has more than two years of experience writing and editing technology-related articles. He is a technology enthusiast and English teacher.

The wikiHow tech team also followed the instructions in the article and confirmed that they work.

From this article you will learn how to change the strap on the Apple Watch to another. You can perform this process without any tools or prior experience. Keep in mind that Apple Watch straps made by Apple will almost always work with your Apple Watch, while third-party straps may not.

  • Open the Watch app on the iPhone connected to the Apple Watch.
  • Tap “My Watch” in the lower left corner of the screen.
  • Locate the number “mm” under the Apple Watch at the top of the screen.
  • Make sure your replacement strap is the same width (38mm or 42mm) as your Apple Watch, and be wary of straps that claim to fit both the Apple Watch 38mm and 42mm.
  • You can also buy third-party Apple Watch straps at most tech stores and online, but be sure to check customer reviews. they’re not always reliable.
  • This is not strictly necessary, but it will keep you from such things as the accidental activation of an emergency SOS or answering text messages in gibberish.
See also  How to change the topic for black in iPhone

Remove the other side of the strap. Hold down the other side of the strap locking button and slide the other end of the Apple Watch strap out. You should still have the Apple Watch screen without the wristband.

Do not use an unlocked strap or bracelet with the Apple Watch

If you don’t feel a click, try sliding the strap slightly to the side and then putting it back. If it is correctly locked, the strap should not move randomly from side to side without the lock button pressed.

If you can’t get the strap to lock into place and it moves effortlessly from side to side, don’t use it with your Apple Watch.