How to clean an HP pavilion laptop

HP Computers. Cleaning the computer

Learn how to clean your computer to remove dirt and dust and use the CDC’s recommended disinfectant solution to clean surfaces that users often touch, such as the mouse, keyboard and touchscreen.

The Centers for Disease Control and Prevention (CDC) recommends cleaning and disinfecting surfaces to prevent the spread of acute respiratory viral infections in homes and public places.

As a result of the cleaning methods mentioned in this document, the appearance of the devices being cleaned may change over time.

Before cleaning your computer, do the following steps to reduce the risk of electric shock:

The first way of cleaning a laptop. for beginners

This way of cleaning a laptop from dust is designed for those who are not well versed in computer components. Even if you have not disassembled computers, let alone laptops before, follow the steps below and you will succeed.

Notebook cleaning tools

  • Screwdriver to remove the bottom cover of the notebook
  • A can of compressed air (commercially available)
  • Clean, dry surface on which to clean
  • Antistatic gloves (optional but recommended)

Step 1. remove the back cover

First of all turn off your notebook completely: it should not be in sleep or hibernation mode. Unplug the charger and remove the battery if your model requires it.

The process of removing the cover itself may vary, but in general, you will need:

  • Remove the screws on the back panel. Make sure you take into consideration that some notebook models may have screws underneath the rubber feet or stickers. Also in some cases, the screws may also be on the side edges of the laptop (usually on the back).
  • After you have unscrewed all the screws, remove the cover. Most notebook models require you to move the cover to one side. Do this carefully, if you feel “something is in the way” make sure that all the screws have been unscrewed.

Step 2. Clean the Fan and Heat Sink

Most modern laptops have a cooling system similar to what you can see in the picture. The cooling system uses copper tubing that connects the video card chip and processor to the heatsink and fan. To clean the cooling system of large chunks of dust, you can first use cotton swabs, and after that clean the rest with a can of compressed air. Be careful: heat pipes and heat sink fins can be bent accidentally, and you should not do that.

The fan can also be cleaned with compressed air. Use short “squirts” so that the fan does not spin too fast. Also ensure that there are no objects between the cooling fan blades. Also avoid exerting pressure on the fan. One more thing: do not turn the air bottle upside down if you hold it vertically, otherwise liquid air can get on the boards and damage electronic components.

Some laptop models have several fans and radiators. In this case just repeat the cleaning steps above with each of them.

Preparing a notebook HP Pavilion dv6 for disassembly

HP Pavilion dv6 laptop, disconnect the charger, modem, flash card, headphones, other devices. how to disassemble the laptop HP Compaq Presario CQ57, can how to disassemble the laptop HP Pavilion G6 for cleaning. Make sure it is one hundred percent turned off. Wipe the surface of the laptop with a special wipe to prevent dust from getting on the internal components. Close the lid of the laptop and put it in front of you back panel upward.

Prepare in advance a small container for bolts, which you will unscrew from the laptop. How to Disassemble an HP Pavilion G7 Laptop. Disassemble and reassemble the HP Pavilion G7 laptop computer for cleaning or repair. Each kind should be put in a separate place, so you don’t get confused.

How to Start Disassembling an HP Pavilion dv6 Notebook?

So you have an HP Pavilion dv6 laptop lying on a soft surface (to protect the case from scratches while you work). How to disassemble?

First remove the battery and unscrew the screws under it. Remove the top cover in the form of an upturned letter “d” by picking it up with special tools or a screwdriver with a straight tip. Do not use a knife or other sharp objects to disassemble the notebook, as you may damage its accessories, cut the flat cable or cable. On some models the cover is secured with screws that do not need to be removed for disassembly. There may also be two separate covers for the hard drive and memory cards.

So, before you on a soft surface (to protect the body from scratches during operation) is a laptop HP Pavilion dv6. How to disassemble?

Remove the battery and the screws underneath first. Remove the top cover in the form of an upturned letter “g”, picking it up with special tools or a screwdriver with a straight tip. Do not use a knife or other sharp object to disassemble a notebook; you risk destroying component parts or cutting the cord or cable. On some models the cover is secured with screws that do not need to be removed during disassembly. There may also be two separate covers for the hard drive and memory card.

Block: 4/13 | Number of characters: 663

Disconnecting cables from the motherboard

Disassembly of the HP Pavilion dv6 laptop at this stage is reduced to “manual work”. Disconnecting cables and plugs from different devices. The best way to disconnect them in the following sequence: USB cable from the module, cable from the speakers (some models), cable from the matrix, cable from the webcam, remove the metal panel.

Operating a laptop HP Pavilion dv6, how to disassemble it to the last screw, you do not need to know. But sometimes you need to remove the display panel. This is a very delicate and responsible job, so it’s not recommended to do it at home without an absolute necessity.

First you need to remove the wireless NIC and disconnect the two antennae cables from it. Then the antenna cables and video cable are disconnected from the motherboard. Antenna cables pull down, behind the back panel. And the video cable is pulled up by the special black tab. It remains to unscrew the bolts fixing the monitor and remove it.

Popular articles:

The keyboard is easier to remove with a small knife. Simply put the blade into the gap at the top and carefully remove it from the latches around the perimeter, then you won’t get any scratches at all.

Latest news

Redmi Note 11 Pro: price and release date

Xiaomi Redmi brand unveiled 2 new Pro series Redmi Note 11 smartphones at an event in Bangalore, March 9. The company has released the Redmi Note 11 Pro and Redmi Note 11 Pro Plus, which are apparently a step up from the Redmi Note 11 and Redmi Note 11S that were unveiled last month in the country.

Bitcoin mining software

Bitcoin mining software is essentially what makes bitcoin work. By tracking and securing transactions known as blockchains, users can earn bitcoins instead of paying for them with real currency.

Why are there blue dots next to some apps

Sometimes while browsing the home screen of your iPhone or iPad, you’ll see a blue dot next to some app names. What does this dot mean? We’ll explain. But keep in mind, our article doesn’t address problems with iPhone copy Korea. If you see a blue dot next to an app name on the home screen of your iPhone or iPad, it means the app has recently been updated.

Cleaning the cooling system of the HP Pavilion g6 laptop

Into repair entered HP Pavilion g6 laptop with the declared malfunction. shuts down just like that after some small time. Power on, run aida 64:

We see that the processor temperature is 97 degrees. And it is without loading. Naturally, the laptop shuts down, because everyone wants to live. And the laptop, too. Well, let’s disassemble it, clean it from dust.

Disassembly of the laptop standard: the first step. turn the laptop on the matrix:

We remove the battery pack, unscrew the two screws of the cover that covers the hard drive and memory, put it aside:

Unscrew the screw that holds the DVD-ROM and pull out the DVD-ROM:

Pull out the memory and unscrew all the screws we see:

I usually lay the screws out in the order they were screwed in, that is, if the screw is from the top left corner, I put it in the top left corner:

Then turn the laptop and disconnect the keyboard. this is also quite a standard procedure. the keyboard is kept on the latches, which we press with a screwdriver:

Previously, it would be nice to unscrew the screw that holds the keyboard from the back (I did not unscrew at once. had to unscrew later):

After which the keyboard is easily detached from the case. Disconnecting the keyboard stub:

Then with the mediator, carefully, we open the whole length of the notebook case:

Finally we get to the insides:

Disconnect the power connector and USB cable from the right side of the laptop:

Remove the screw and pull the Wi-Fi module out of the motherboard:

We unscrew one single screw that holds the motherboard:

We remove the motherboard and see that the hole through which the fan air intake is clogged with something:

Subsequently, it turned out that in the air intake hole stuck gum, which had to be completely torn off. If I didn’t take it out, the air wouldn’t get into the cooling system of the laptop in the required volume, which again is fraught with overheating. Here’s a picture of the motherboard of the HP Pavilion g6 laptop:

Unscrew the 4 screws from the CPU heatsink and remove the entire cooling system:

Unscrew the two small screws and remove the fan to the side:

Using a brush, completely clean the radiator of the cooling system from dust. Also clean the blades and fan housing: