How to connect a laptop to a Wi-Fi router

How to connect PC to Wi-Fi-methods for connecting a computer to Wi-Fi

It goes without saying that, of course, it would be possible to use a special network cable and connect a stationary terminal directly to the corresponding port of the router. But this is terribly inconvenient, because, for example, in a private house, the router can be on the ground floor, and the computer on the second. How to connect PC to Wi-Fi without a cable, and even with minimal costs? In this case, in any case, you will need a device that, when connecting to the terminal, will act as a wireless signal receiver. There are also not many options here as we would like.

Firstly, you can additionally purchase an inexpensive Wi-Fi-adapter of either external or internal type, or use another router or mobile device as a receiver. It is unlikely that, of course, you will find a router at home, so considering the main issues related to how to connect a PC to Wi-Fi without a cable, we will build on the use of additional receivers and mobile devices, which, for sure, has Everyone and everyone.

The inclusion of Wi-Fi is hardware

The need for the Internet exists constantly, therefore, how to connect a laptop to Wi-Fi, the question is relevant. Initially, you should try to install the connection of the hardware. The easiest and most common option is to use Wi-Fi activation buttons on a laptop. If this method does not work, it may happen that the driver of the module flew off. Consider the possible options.

Some portable computers equipped with adapters for connection are not adapted to connect to wireless networks after activating the device. How to turn on Wi-Fi on a laptop? In such cases, one or more buttons located on the laptop will help. There may be several options, and they directly depend on the model of your portable computer, as well as the date of its release. On old models, turning on the Wi-Fi module is presented in the form of a separate tumbler or a separate button. Such a switch can be located both on the front and the side parts of the case, so you need to carefully examine your petal for such a button.

If in the process of searching, it was not possible to detect the wireless activation button, you should look for a button in a number of functional keys. They are located at the top of the keyboard and have a marking, usually from F1 to F12. Among these buttons, you need to find exactly the one that is responsible for the activation for turning on the transmitter. Most often it is marked with a wi-fi icon in the form of a transmitting antenna.

Many manufacturers have tried to unify this function, so you can turn on Wi-Fi on the laptop using a simple pressing of the F5 combination. Try it, and most likely, luck will smile at you.

How to catch a wireless signal?

If there is a signal, then one device must send it (router), and another. Accept. Today, laptops and many tablet PC have Wi-Fi flower receivers by default, while stationary computer units are not customary to supply with this spare part. But miracles happen. The receiver occurs occasionally when assembling as an additional function. It is not difficult to check this:

  • The user will need to go to the Device Manager: you can find this setting in the control panel or through the built.In search. The name does not change for many years from the system to the system.
  • To open the list of network adapters, among which to look for the words “wireless” (wireless) or Wi-Fi (writing can be not only shallow, but also separately or through a hyphen).
See also  Sony vaio how to turn on Wi-Fi

How to Create Wireless Wifi Network Connection in Laptop or PC

If the list contains names without these words, that is, an option to independently connect a wireless signal receiver to your computer. Which are of two types:

  • Internal. Connected to the motherboard through the PCI or PCI Express connector (you have to disassemble the case);
  • External. USB adapter. Shaken ports will not benefit the signal.

The problem of how to connect a computer to the Internet via Wi-Fi USB adapter is solved in three stages: joining the port, installation of drivers and setting up. Similarly, you can connect an internal (PCI) adapter, only the port is located on the motherboard.

If the installation of drivers did not occur automatically after the adapter connection, you will have to use the drive with drivers or download on the Internet (for this case you can temporarily use to reach the Internet from a router to a computer).

As a rule, after installing the drivers on the taskbar (in the TEA), a Wi-Fi network appears, clicking on it, the user will see a list of wireless networks. It is enough to select the name of the home network in the list and enter the password. The factory name and password can be found on the router or in the instructions.

If there is no icon on the taskbar, then it is worth looking for a list of available networks in the control panel or in the parameters of the system, it is easiest to use the built.In search for the system:

How to connect Wi-Fi on a laptop Windows 7, 8, 10

Since the technology is not in place, the computer software is constantly changing, updated, and the usual power button disappears. Do not panic, let’s look at how to connect the Internet on different Windows systems.

  • If you have Windows10, then you will need to enter the connection panel and check that the Wi-Fi icon is included, and the “plane” mode is deactivated. Open the parameters, select Wi-Fi again and make sure that the slider stands in the “VCL” position.
  • It is enough to enter the “Semerka” to “Networks Management”, select the adapter parameters, then go to the wireless network, usually it is there alone and turn it on again using the right button. After that, open the list of available points and connect.
  • In the eighth version of “Windows”, go into the parameters of your PC, open the change in the parameters and section “Wireless Network”. If necessary, translate the slider to the state. After that, just select the name of your network in the list, enter the password and wait for the connection.
connect, laptop, wi-fi, router

Features of connection to Wi-Fi laptops with various OS

Depending on the operating system, the settings procedure and key points of work may differ.

Settings on Windows 7

To correctly configure Wi-Fi on a laptop with the Windows 7 operating system, you need:

  • Find and open the “Networks Management Center” tab.
  • Then click on “Changes in the parameters of the adapter”.
  • After that, press the “properties” of wireless connection and set the necessary parameters for the TCP/IPV4 protocol. If you do not know them, contact your provider.
  • Next, you need to go back to the “Networks Management Center” tab and press the “Connect to the Network” key.
  • Select your connection. During the direct connection, you need to enter the security key, after which you will get access to the Internet.

How to Connect a Windows 10 Laptop / PC to Wi-Fi Internet for beginners

You can see a clearly described procedure in the following

Settings on Windows 8 and 10

To connect to Wi-Fi laptopes with the Windows 8 or 10 operating system, take the following steps:

  • Find the tab “Network”.
  • A list of networks will appear that are available, among which you need to choose your.
  • The system will request password entering. Enter it in the specified field.
  • After that, press the “Next” button, and literally after a few seconds you can use the Internet freely.
See also  A laptop does not see HDMI cable from a TV

You can clearly see the procedure for connecting and setting up wireless Internet, described above, you can in the next

Now you got acquainted with step-by-step instructions on how to connect a laptop to Wi-Fi using a special key combination and wireless network settings on a laptop. This is a simple procedure, and you can handle it, even if you are a novice user.

Connecting through the “Networks Management

To establish a connection in this way:

  • In the laptop settings menu, go to the “Center for Control of Networks and General Access”. You can reveal this section in the same way that opened the command line. Through the search line in the “start”.
  • Next, you need to switch to the tab of additional parameters. In this paragraph, enable commands “Detection of the network”, “General access with password protection”. Then save the changes and return to the “Center for Control of Networks”.
  • The next step is to set up adapter parameters. To do this, go into the same section of the settings. In the window that opens, we connect to an accessible network: select the device that the laptop found, click on the right mouse key, select the “Properties” tab. In the “Access” tab, we install checks in all points. Now you need to select the desired network in the “Connection of the Home Group”.

How to setup

Above, we examined the instructions on how to connect the Internet via Wi-Fi router to a laptop via a wire or wireless network. In both cases, an important role is played by the setting of the device. Below, consider what information it is necessary to enter into the router and PC.

Router

First, consider how to connect Wi-Fi on a laptop and configure a router. Let us give instructions on the example of tp-link. The algorithm of actions is this:

  • Enter the router by entering a browser 192 into the URL.168.One.1, and then drive the login and password into the fields for authorization. If the panel does not appear, indicate other numbers. 192.168.0.One.
  • Update the firmware. To do this, download the latest version of the software from the site and install it on the router. Pre.Turn off the cable from the provider, and then enter the system settings and the update line. Next, select the file and wait for its download. At the final stage, restart the device.
  • Enter the settings. To connect to the Internet from a laptop via a Wi-Fi router successfully, indicate the type of connection. To do this, go to the network section, and there Wan. Indicate the necessary parameters (must be in the contract with the provider) and save the data.
  • Set Wi-Fi settings. Before connecting a laptop to a router via Wi-Fi, set the name of the network and password for entering. To do this, go to the wireless network section, and there are settings. Fill the fields with the name, indicate the region, channel (auto), mode (11BGN), channel width (auto). Or you can independently figure out which channel it is better to choose and tune in to it.
  • Go to the security section, set the WPA2 protection level and drive password into a special field. Try to be reliable. If you put the same numbers, anyone can connect to the laptop.

After saving data, reboot the router. Now you can connect the Internet via Wi-Fi router on a laptop and use the capabilities of the global network.

If you have problems with setting up, you can ask someone to connect remotely to the router via the Internet and help.

Certain settings must be made on the laptop itself. To do this, enter the control panel, and there is on the network and the Internet.

connect, laptop, wi-fi, router

Select network connections. Next, find your connection, click with your right mouse button and enter the properties. At the next step, put a mark on the Internet protocol version 4, click the properties and place notes at the points of receipt of the IP address and the DNS server automatically.

After these actions, connecting a laptop through a Wi-Fi router should not cause difficulties.

Features of connection to Wi-Fi laptops with various OS

Depending on the operating system, the settings procedure and key points of work may differ.

See also  How to set up a wireless network on a Windows laptop

Settings on Windows 7

To correctly configure Wi-Fi on a laptop with the Windows 7 operating system, you need:

  • Find and open the “Networks Management Center” tab.
  • Then click on “Changes in the parameters of the adapter”.
  • After that, press the “properties” of wireless connection and set the necessary parameters for the TCP/IPV4 protocol. If you do not know them, contact your provider.
  • Next, you need to go back to the “Networks Management Center” tab and press the “Connect to the Network” key.
  • Select your connection. During the direct connection, you need to enter the security key, after which you will get access to the Internet.

You can see a clearly described procedure in the following

Settings on Windows 8 and 10

To connect to Wi-Fi laptopes with the Windows 8 or 10 operating system, take the following steps:

  • Find the tab “Network”.
  • A list of networks will appear that are available, among which you need to choose your.
  • The system will request password entering. Enter it in the specified field.
  • After that, press the “Next” button, and literally after a few seconds you can use the Internet freely.

You can clearly see the procedure for connecting and setting up wireless Internet, described above, you can in the next

Now you got acquainted with step-by-step instructions on how to connect a laptop to Wi-Fi using a special key combination and wireless network settings on a laptop. This is a simple procedure, and you can handle it, even if you are a novice user.

How to connect a laptop to a router via cable

Let’s now look at the laptop connection to the router via cable. Mostly, this type of connection is resorted to in the event of a wi-Fi laptop adapter or for the initial setting of the Wi-Fi router. Imagine that you have a completely new Wi-Fi router, just out of the box:

  • Check out to begin with all the information indicated on the box of the router, especially with the address that allows you to enter its settings integration;
  • Connect the Wi-Fi router to the electric network using the power supply applied to it;
  • Connect the Ethernet cable of the provider of your Internet to the WAN port on the router case (everything should be painted on it);
  • Take a double-sided Ethernet cable (usually in the kit), connect one end to any free LAN port on the router housing, and the other in the Ethernet laptop extension;
  • Open to the browser on the laptop and go to the address that was indicated on the device box, for example 192.168.One.One;
  • Complete the router, respectively, the network connection that your provider provided you (select the type of connection, enter the necessary data, etc.D. And t.P.) and activate the distribution of the Wi-Fi network.

As soon as you do everything correctly, your laptop will automatically find an affordable network connection, and the router, in turn, will begin to distribute Wi-Fi. If you performed the initial setting of the Wi-Fi router, and you are all right with the Wi-Fi adapter on the laptop, you can use the first item in the article to connect your device to the Wi-Fi router.