How to connect Honor headphones to iPhone

Listening to audio wirelessly

The headphones work via Bluetooth pairing, have the ability to connect to any device with a Bluetooth transmitter: PC, smartphones, phones, players, TV, tablets, etc. When fully charged and well connected to the player they are capable of recreating clear stereo sound with an emphasis on bass.

Hands Free function

Wireless headphones STN-13 and similar are also a headset, which can be used for telephone and internet communications. Calls are answered by pressing a single button (usually the button with the handset symbol).

Built-in MP3 player

Built-in player allows you to listen to music from a memory card in mp3/wma formats. MicroSD card (up to 64GB) can be inserted in the special slot. Listening is possible in MP3 player mode (usually represented by a button with an MP3 symbol).

Audio cable AUX

When the battery is low or turned off, you can connect the gadget via AUX cable and 3.5mm jack to any device like a regular wired headphones and listen to music from PC, iPod/iPhone, TV, mp3/mp4 player, etc.д.

Connecting wireless Bluetooth headphones on Windows Mobile 10

Step 1 Unlock the device. Bring up the settings shortcut bar by swiping from the top of the screen down. We need to find All Settings, tap on it. Or find the Settings app in the list and tap on it.

Step 2 You are now in the control panel on your phone. Now find Devices. Bluetooth, camera and tap on it.

Step 3 You are in the device menu of your phone. We are looking for a Bluetooth module, find it in the list and click on it.

Step 4 In my case, Bluetooth is disabled. If you have it disabled as well, turn it on by tapping the switch. If you already have your Bluetooth on go to the next step.

Step 5 Now take your headphones, make sure they are off, find the power button and hold it for up to 10 seconds. This will allow the headphones to go into pairing mode. Then go to next step.

Step 6 After a while the name of your headphones should appear in the list of devices. In our case Momentum M2 IEBT appeared in the list. As soon as you see the name press on it to finish the pairing.

See also  How to transfer photos from android to iPhone

Step 7 Once you press the name of the headphones the pairing process will start, you can see it in the screenshot above.

Step 8 That’s it, your headphones are connected to the phone and ready to work. Next time you don’t need to go through the pairing procedure again, you can just turn on the Bluetooth on your phone and they will establish a stable connection automatically in a few seconds.

Step-by-step instructions for connecting wireless headphones for Android

So you’ve got your brand new Bluetooth headphones and you can’t wait to try them out. But don’t be in a hurry: if you rush to plug them in after taking them out of the package, you are likely to meet the first mistake: the headphones may not be charged, then they will quickly turn off, the phone will not see them, or they will not turn on at all. So rule number one: Charge your device. As soon as the charging indicator lights up evenly, you can disconnect the headphones. Then turn on Bluetooth on your phone. This can be done in the settings, or in the top bar that pops up, long press on the icon with the stylized letter B.

After the blue tooth on the phone turned on, activate the headphones. To do this press the power button and then make a long press on the Bluetooth activation button. The indicator light, if there is one, should blink. On the phone, in the appropriate section, select Search for devices. After a while, the smartphone will prompt you to select one of the gadgets found. You can most often identify your headphones by their name. If you bought a Chinese device, then the name can be long and incomprehensible. Simply turn the device off and see what disappears from the screen.

After you have managed to find your headphones, click directly on them you will be prompted to connect them to your smartphone. Agree. The selected device should appear in the upper list of installed connections. It will say Connected next to it. In most cases, this will also show the charge status of the headphones.

If you have headphones in a case, keep in mind: it is better to open the lid after you have turned on the network on the device, waiting for the Ready light to appear.

Connecting to an Android phone

Once the pairing is done, the headphones will connect automatically in the future.

See also  How to check iPhone se when buying

Make sure that the Bluetooth accessory and the iOS device or iPadOS device are close to each other. Turn the Bluetooth accessory off and on again. Make sure the Bluetooth accessory is turned on and fully charged or connected to a power source. If the accessory uses batteries, check to see if they need to be replaced.

connect, honor, headphones, iphone
  • Charge the headphones.
  • Take both earphones out of the case and hold them.
  • Press the buttons (mechanical or touch, it depends on the model) for about 5 seconds.
  • Press the buttons on the headphones again at the same time and hold them for about 20-50 seconds.
  • Put the headphones in the case for 10 seconds.

How to connect headphones to a new or different phone, iPhone, laptop?

When using wireless Bluetooth headphones (conventional, or separate TWS) sometimes you need to connect the headphones to another phone, laptop or PC. Or to a new device. For example, to the iPhone. And sometimes this is difficult, because the headphones continue to connect to the old device automatically after being turned on, or after being removed from the case. And another device or a new smartphone doesn’t see them.

To connect Bluetooth headphones to another device, you must remove (forget) the headphones on the old device to which they are currently connected. Or simply activate the connection mode on the headphones and pair them with your new phone, laptop, etc. д. After disconnecting the headphones from the device, they will automatically go into connectivity mode and will be available for connection on your new device. So it works on Android, on iPhone, on Windows computers, etc. д.

Making wireless Bluetooth headphones visible to the iPhone

At this point the pairing differs depending on the model, this can be clarified in the instruction manual of the headphones. Here are the basic options:

HOW TO SETUP APPLE AIRPODS! Best Wireless Headphones for iPhone!

  • Just open the case.
  • Open the case and pull out the headphones. One or two.
  • Open the case and press the button on the case. If present.
  • Taking the headphones out and pressing the buttons/sensors on them. There aren’t many models like this anymore. Usually you need to press the sensor buttons on both headphones for a few seconds.

This is true for the first time the Bluetooth headphones have been paired. If they have already been paired with another source, make sure they are not connected to it first.

How to enable pairing mode on headphones that are not TWS? That is, on regular wireless headphones with a headband or wire between the housings. There are two basic ways to connect wireless headphones to your iPhone:

  • From the off state, press the power button and hold it for another 2-5 seconds after powering on. There will be a corresponding indication and / or voice/ audible notification that the headphones are in the right mode.
  • If there is a dedicated button for connecting (usually marked with a Bluetooth icon), then press it once or twice or hold for a couple of seconds. Of course, the headphones should be turned on.
See also  How to make a screenshot on iPhone

To understand why the phone does not find the Bluetooth-headset, it is necessary to exclude some defects: Make sure that the batteries in both gadgets are charged. Make sure the accessory is not being used by another device. Check whether synchronization of the smartphone with the headset is activated.

Press the WinI key combination to enter “Settings”:

  • Go to “Devices.
  • Turn on “Bluetooth.”.
  • Turn on your headphones.
  • Click “Add Bluetooth or other device.”.
  • Choose the first type.
  • The search will begin. Once your wireless headset is detected, select it for connection.
  • The process is complete.

Why won’t your phone see your wireless Bluetooth headphones?

One of the most popular problems you can bump into when connecting headphones to your phone is when your phone doesn’t see wireless headphones that connect via Bluetooth. This is an issue for Android phones as well as iPhones. Well, with the advent of separate TWS-format Bluetooth headphones, these problems have become even bigger. First, a lot more people have started using wireless headphones, using them as a headset. Second, TWS headphones are technically more complicated, and there are not uncommon problems with their connection.

In this article I will explain what to do when your phone does not find Bluetooth headphones or headsets. It just can’t see them in the list of available Bluetooth devices. And which you may have seen before and they plugged in.

In this article we will talk about TWS headphones (when two headphones are separated). and conventional wireless headphones. Solutions are suitable for different Android smartphones: Samsung, Xiaomi, Honor, OPPO, Huawei, etc. д. These solutions are also suitable for the iPhone. As for the headphones themselves, the manufacturer and model does not matter: JBL, Sony, Honor, Xiaomi, Motorola, QCY, Chinese i7s, i9s, i10, etc. д.