How to connect jbl headphones to the phone

JBL T450BT Bluetooth Wireless Headphones Review. How to Connect to Smartphone, Laptop, TV

Preparing the headphones to connect to the phone via Bluetooth

You just have to turn the headphones on to get started. On conventional headphones, which are not separate, for this there is a separate button. There should be a beep and/or the indicator light should come on/blink.

If you have TWS headphones that are separate, they usually turn on as soon as you take them out of the charging case. This is usually indicated by a beep, or indicator light. If you take the headphones out of the case and they do not turn on (but they are charged), press the button on each headphone for 3-6 seconds. Be sure to remove both headphones!

On some models you just need to open the charging case. For example, in the case of Airpods.

To understand why the phone does not find the Bluetooth headset, it is necessary to eliminate some defects: Make sure that the batteries in both gadgets are charged. Ensure that the accessory is not in use with another device. Check to see if your smartphone is synchronized with the headset.

Close the charging case. Open the charging case. The headphones will automatically go into Bluetooth pairing mode. On your mobile device, activate the Bluetooth function to connect the headphones to your mobile device, launch the Galaxy Wearable app and follow the on-screen instructions to complete the connection.

  • Turn on the headphones and Bluetooth on your smartphone.
  • Go to the phone menu, find the Bluetooth tab, enter it.
  • You’ll see a list of devices that are in range of the signal.
  • Tap on the name of the device. the smartphone will try to connect to it.

You can connect the Tune 500bt by holding down the button on one of the bowls, or by selecting the corresponding Jbl on the smartphone, after turning on the headphones. The connection is fast. No repeated connections to the same smartphone or laptop are required.

To figure out why your phone is not finding a Bluetooth headset, you need to rule out some flaws: Make sure that the batteries in both gadgets are charged. Make sure the accessory is not being used by another device. Check to see if your smartphone and headset sync are activated.

What to do if the headphones do not connect to the phone?

  • Check to see if Bluetooth is turned on, turn it on;
  • Check that your headphones are not in the list of connected Bluetooth devices;
  • Make sure that the headphones are in pairing mode;
  • Trying to connect other Bluetooth headphones;
  • Connecting the headphones to another phone;

How to reset the JBL Tune 220 Tws headphones? After disconnecting the headphones from the smartphone, put both in their charging case; then remove only the RIGHT headphone from the case, press and hold down the button for 10 seconds (during this time, the headphones will reboot);

Pairing between the device and the Bluetooth accessory

  • On your device, go to the Bluetooth Settings menu and turn on Bluetooth.
  • Put the accessory in discoverable mode and wait until it appears on the screen of the device.
  • To pair, press the accessory name when it appears on the screen.
See also  Use the phone as a web camera Windows Phone

How to connect the JBL Tune 120 TWS Bluetooth headphones to your phone

Pair the left and right earpiece. To do so, remove them from the charging case and press the left and right earphone 3 times, then they will automatically pair.

Enter Bluetooth connection mode. To do this, press and hold the right earpiece for 5 seconds.

Open Bluetooth on your phone, find the “JBL Tune 120 TWS,” connect.

Note: ✓ After the first pairing, subsequent connections will be automatic. ✓ The JBL Tune 120 TWS has the option of using one earphone as a Bluetooth headset. The right earphone, which has a built-in microphone, is used for this.

Read full: Instructions for using the JBL Tune 120 TWS in-ear headphones. How to wear, how to reset

Pairing with your iPhone

To connect wireless headphones to iOS devices, follow this procedure:

  • Turn on the JBL Harman headphones.
  • On the iPhone, go to “Settings”.
  • Go to the “Bluetooth” connection settings.
  • Move the indicator to the “On” position.
  • In the “Other devices” field select the necessary one.

Switch on listening to any media file to check the device. If the sound goes through the first and the second earphone, the connection is successful.

How to set up

To connect the headphones to your smartphone is one thing, but to set up the headset is a completely different matter. Before you get down to the standard operation of wired headphones on Android smartphones, you need to identify device compatibility:

  • You need to see the resistance value of the headset. It is indicated in ohms. Its numerical value can be found on the packaging of the headset. Headphones with an impedance of 16-32 ohms are ideal for smartphones. Some smartphone models can contact a headset with an impedance range of 50-64 ohms. Modern models of smartphones do not have an amplifier. If you connect to a smartphone headset with high resistance level, the sound will be faint and indistinct.
  • It is necessary to specify the type of connection. In this case the audio jack trs and trrs options are considered. In simple words, trs is a standard audio jack with a diameter of 3.5 mm, while trrs is a standard size mini jack with an additional contact to transmit the microphone signal. A good headset is often equipped with a balanced cable and a balanced jack, which looks like a normal plug. But you cannot connect them to the phone.
  • Checking volume. If the headphones according to the specifications correspond to the smartphone, but when you connect them the sound is quiet, you need to check the volume level for the applications. This feature is present in all phones with the Android operating system. You can set the volume for each individual app. Most likely, the player is set to low sound.
  • You need to test the headphones by calling. If during a conversation you can hear the interlocutor well, there is no noise, then the headphones are perfect and have been properly adjusted. If there is suddenly no sound, you should check the functionality of the audio jack or the chip that operates the sound effects of the phone.
  • After you have plugged in the headphones you should check if your smartphone recognizes the new device. Quite often when you connect the headset in the top part of the working panel of the phone there is an icon of headphones. If it does not appear, then you need to check the tightness of the plug in the connector. As an additional check of serviceability of purchased headset it is necessary to take other earphones with the same type of connection. If the other headset works perfectly, then the headphones are defective.
  • After checking that the headphones match and determining that the headset is working, you need to move on to setting up the sound. You can use the standard equalizer or an additional application that corresponds to the operating system. It is worth noting that third-party apps are the best setting for smartphone users. They can be used to change the overall character of sound playback, increase the standard maximum volume, add bass, and more.
See also  How to connect Honor headphones to iPhone

Owners of a wireless headset for Android smartphones are doubly lucky:

  • A wireless headset is most comfortable for constant use, although it does require recharging in a timely manner.
  • The setting of these headphones is much easier. There are practically no problems connecting them.

To set up a wireless headset, you need to turn on Bluetooth and use your smartphone’s system equalizer. You can also download a third-party application that corresponds to the type of headset. With it, not only the overall configuration, but also the different sound effects.

Wireless

The process of connecting wireless headphones is slightly more complicated. To date, there are several ways to connect them to your smartphone. The distance between the devices should not be more than 10 m. Premium models suggest support at a distance of 100m. The basic pairing method can be found in the manual of the headphones themselves and the phone:

  • Before you connect the headphones, you need to activate them
  • After the headphones are turned on, it is necessary to go through the settings menu of your smartphone to the Bluetooth section. Most often it is among the first of the total list of settings
  • Selecting the line “Bluetooth”, it is necessary to move the slider to the position “on”
  • Next, the window with the search of new devices appears on the screen of the smartphone
  • In the list that appears, you must find the name of the headset
  • To pair, you will need to enter the code. This is most often 0000.

If you use a Bluetooth headset only for talking on the phone, you will not be able to listen to music through it. However, the developers of the Android operating system have managed to find a way out of such situations. They have created a special application “Bluetooth router”, which is available to all users on the PlayMarket platform. After downloading this utility, you need to connect Bluetooth on the audio headset and smartphone, then perform the standard pairing procedure and only then run the program to install the router.

See also  iPhone hung on iTunes lace what to do

Resetting the pairing of Bluetooth headphones and another device

There are many reasons why a user can stop using wireless headphones with a specific smartphone. It may be time to change either the “ears” or the smartphone. Quite often it is necessary to reset the pairing for technical reasons, as it happens that both the phone and the headphones need to be rebooted.

To reset the connection, enter the familiar Bluetooth menu from your phone, find your headphones in the list, and click on the additional information icon next to them (usually the little i circled around it). A new window will open that displays different options to set up the headphones. For resetting, the item “Forget this device” is required. Tap this item removes the headphones from the list of available devices. The next time you want to use the headset, you will have to pair it as if it were a new device (see “Pairing a Bluetooth headset with a headset” on page 16). “First Bluetooth headphone connection”).

In general, using Bluetooth headphones is very easy. They give you a whole new experience that you can’t get from a wired accessory. The JBL product lineup is designed to meet the needs of the most demanding user. Perhaps the only thing that can be considered an inconvenience is the need to regularly charge the wireless headset. There’s a special cable that comes with your headphones for that, and if it’s TWS, there’s a special case for charging and storing the “earbuds,” which you also need to charge from time to time.

See also the intricacies of connecting Bluetooth headphones to your TV.

connect, headphones, phone