How to connect the Apple Watch to a new iPhone

Apple Watch: How to pair it with your new iPhone

If you’re new to the Apple Watch or are upgrading from a previous generation, it’s not clear how to pair the Apple Watch with a new iPhone.

Follow the instructions and tips on how to connect the Apple Watch when upgrading your iPhone.

Apple Watch: how to pair it with your new iPhone

  • You need to disconnect the Apple Watch from your old iPhone. To do this, go to the Apple Watch app on your iPhone tap on the top of the Apple Watch touch the i symbol, and then disconnect the Apple Watch.
  • If Find My Apple Watch is enabled, you’ll need to enter your Apple ID password to unlink the watch.
  • Wait for the Apple Watch to disconnect. This could take more than half an hour, depending on how much data is stored on your Apple Watch, so make sure you take your time and have enough charge on your watch. On the Apple Watch, you will see the Apple logo with a ring around it, indicating that it is disconnected from your iPhone. You may see this screen several times as the watch is disabled. To make sure the Apple Watch is fully paired, you will see the Apple Watch Welcome screen on the watch itself.
  • Once you’re not connected, go to the new iPhone, go to the Apple Watch app and tap Start Pairing. If you’re using iOS 11, a map will automatically appear on your iPhone screen asking you to pair. Just press continue to start pairing.
  • You will be prompted to point your iPhone at the Apple Watch with a visual QR code displayed on the watch screen.
  • You will then be asked to set up your Apple Watch as new or from backup, select restore from backup, and select the most recent Apple Watch backup.
  • From there, follow the instructions on the screen on your iPhone. This includes turning on Siri, Apple Pay, and entering your additional password.
  • You will now see the Apple logo on your Apple Watch with a ring around it. You’ll have to wait until the ring is full, and then the Apple Watch setup is complete.

While it may seem like a fairly complicated affair, unwinding your Apple Watch is pretty easy if you’ve done it a few times.

See also  How to make WhatsApp like on iPhone

How to pair and set up your Apple Watch — Apple Support

For more help getting the most out of your Apple devices, check out our guide as well as the following articles:

The important point is that the Apple Watch cannot fully work without connecting to the iPhone, so you need to make the connection before using.

What you need to know before making the connection between the gadgets:

  • Turn on the Smart watch by fixing the Digital Crown wheel. If they don’t turn on for a long time, then they need to be charged. After charging, you can proceed to synchronize the devices.
  • It is important to have Bluetooth and Internet or Wi-Fi enabled on the iPhone.
  • Update your phone before syncing with the Smart Watch.
  • After going through these steps, you can start connecting.

How to detach (pair) the Apple Watch from the iPhone if both devices are in front of you method 1

Place both gadgets next to each other;

Open the Apple Watch app on your smartphone;

connect, apple, watch, iphone

In the window that will open, at the bottom, there will be a menu “My Watch” on it should be clicked;

After that, you should click on the item “Apple Watch”, on the next screen you should click on i.

By clicking on the “Break pair with Apple Watch” button, you should confirm the cancellation of device synchronization, after which all data about the watch is deleted from the communicator.

How to transfer the contents of the Apple Watch to a new iPhone

And don’t lose your medical and training data.

Actually the whole process is described by Apple itself on the official support site, and the company deserves a special respect. The instructions are detailed, high quality, written in a simple language and contain links to all the necessary additional information, if you suddenly have questions about this or that step. If we compare it with the work of, for example, Google, with regard to its Nexus devices, the wizards from Cupertino are simply gods of instructions.

But, as you know, in reality, things are often not as described on the support sites, and personal experience always gives more information. Here’s my personal experience of the not without adventure of transferring the contents of the Apple Watch to the new iPhone, and I will tell you about it below.

Backing up your iPhone

In iCloud

Back up your data to iCloud: Settings. iCloud. Backup. Start a forced update of the current copy.

On a Mac

There’s also an option to back up your local data on the Mac, as you can recover from it much faster.

Follow these steps: start iTunes. connect iPhone. select “Browse” and encrypt the backup. Without encryption, much of the data will be lost, so be sure to encrypt it!

How to restore information on your new iPhone and connect your Apple Watch

We have a local copy, now connect the iPhone to the Mac and transfer the data. When you connect the gadgets to iTunes, you will be prompted to restore the data from the last copy you made.

After that, run the Watch utility on your iPhone and follow the prompts. When “Restore from Backup” appears, click on it and select the desired backup version. You need to wait a little while for the information to be copied and you can use the Apple Watch.

The iPhone does not display a prompt to use the Apple Watch as you set it up

If you encounter this problem, then break the pairing between your old iPhone and the Smart Watch. Then pair it with a new iPhone. When the prompt is displayed, you should restore the Smartwatch from the backup. Check that your gadgets are up to date, otherwise the backup may not show up in the list of available.

See also  How to save phone numbers on your iPhone

After purchasing an Apple smart watch, you need to perform the initial setup procedure, which takes 10-30 minutes depending on the amount of content you download to your device. Step-by-step instructions with explanations for setting up the Apple Watch are given below.

To set up the Apple Watch (any version) you must have an iPhone 5 or newer “apple” smartphone with installed or newer. You can find out the firmware version on your iPhone by logging into the app Settings and then go down the path BasicAbout this deviceVersion.

Note: The order and list of options offered when setting up the Apple Watch may differ depending on the model (generation) of the device.

Most of the Apple Watch setup is done on the iPhone.

Restore a copy to a new iPhone

When we set up our new iPhone with our iCloud data, there will come a point where we will be asked to set it up as a new iPhone or use a backup, which is the option we must choose if it was the method chosen in the previous step If we did it through iTunes, we must connect our iPhone to iTunes, and when we start setting up, we will be asked to do the same thing as we indicated earlier. Either of these methods will transfer all the data from the Apple Watch to the device

The red dot that appears at the top of your smartwatch screen is a notification indicator, just like on traditional phones as well as most Android devices; It appears when you have new notifications to look at, like messages or even

Make sure the iPhone has air mode turned off and Wi-Fi and Bluetooth turned on. To do this, open Controls. If you see an air mode icon on the watch face, that means it’s turned on. Open Control Point, then turn off air mode.

How to properly move Apple Watch data to a new iPhone

When buying a new smartphone, many people often wonder how to transfer the Apple Watch to a new iPhone without losing important medical and training data, as well as other information.

When buying a new smartphone, many people often wonder how to transfer the Apple Watch to a new iPhone without losing important medical and training data, as well as other information. In fact, this process is described in detail on the official Apple tech support site, and it is worth noting that the information is presented in a detailed and understandable to the general audience, and also contains links to additional information that may be useful when carrying out this procedure.

Of course, in practice things may not happen exactly as described on tech support sites, and even considering that Apple has always been one of the best in this aspect, practical experience shows that not always the transfer of Apple Watch content to a new iPhone goes smoothly and without incident.

How to break up the pairing with the Apple Watch? Step-by-step instructions.

If you want to create a new pairing between the Apple Watch and another iPhone, or if you’re just going to sell the watch, you’ll need to unpaired the iPhone. It can even be done without the smartphone itself. Here are four ways to do it.

See also  How to see the size of a photo on your iPhone

How to detach the Apple Watch from your iPhone if you have both devices in front of you?

Put the two devices next to each other.

In the My Watch tab, click “All watches” (top left corner).

Select the “i” icon next to the watch you want to unpair from your iPhone.

Click “Unpair with Apple Watch.”.

Important: Before you erase the content and settings on the watch, the iPhone will create a new backup of the Apple Watch. You can use it to restore the data on your new watch.

How to pair your Apple Watch without your phone?

You can reset your Apple Watch and erase your data even if your iPhone isn’t around. For example, if it is lost or stolen. To do so:

Go to settings (the gear icon) on your Apple Watch.

Tap “Reset” and click on “Erase all data”.

The watch will then roll back to factory settings, and the Apple Watch and iPhone pairing will be unpaired.

How to reset the Apple Watch via iCloud?

You can also disconnect the Apple Watch from the iPhone via a computer. To do so:

On the iCloud log in with your Apple ID account.

Under “Settings,” find your Apple Watch.

Click “Delete Device” (the cross next to the watch).

How to reset the Apple Watch if you forget the password code?

After the sixth unsuccessful password attempt, the Apple Watch will activate the data protection feature. locking the screen. After a few minutes, you can try to enter it again, but if you still can’t remember the password, you’ll need to delete all information from the watch. And after that, reconnect the Apple Watch to the iPhone and restore data from the backup.

So, to reset the Apple Watch if it’s locked, you need to:

Place your watch on the charger and do not remove it until you have completed all 5 steps.

Hold down the side button until “Reset” pops up.

Press and hold the Digital Crown wheel until “Erase content and settings” appears.

Press “Reset” and confirm the action.

When the reset process is complete, you need to connect the Apple Watch to your phone and choose to restore data from a backup.

If you can’t disconnect your Apple Watch from your iPhone, our i-Store consultants will be happy to help you. Come to visit!

Introducing the Apple Watch Series 6 with a stunning new sensor and special Blood Oxygen app. The watch is equipped with a faster S6 processor based on the System in Package (SiP) architecture and an always-on new generation altimeter. This is the most colorful line with new colors and new straps.

Thanks to the introduction of Bluetooth 5.0 in the Apple Watch Series 3, the third-generation watch will be able to fully work with the iPhone at a distance of 100-120 meters.