How to connect USB headphones to LG TV

Best answer: how to connect USB headphones to TV?

Connect an audio cable that is part of the headset to the TV headphone jack and connect the other end of the audio cable to the wireless adapter. Over, a wireless adapter can be connected to a USB-shat of any device (t. E. TV, PlayStation 4, PS3, Computer, etc.

Headphones can be on the side or on the front panel of the connection.

  • We take the wire of the headphones and connect to the connector 3.5 mm on TV.
  • We check in the TV settings so that the sound is transmitted to the desired output (Headphones, headphones, aux, etc.P)

How to connect wireless Bluetooth headphones to LG TV

The principle of connecting headphones is the same for all LG TVs, with built.In Bluetooth. If there is no Bluetooth module in TV, then you can buy a Bluetooth adapter, more about this (this is cheaper than buying a new TV =)).

On your bluetooth headphones we turn on the conjugation mode (Bluetooth connection).

One.1 on TWS headphones is: opening a case, opening a case to get headphones, clamping on the case or other actions (other options). See the instructions for your headphones if it does not work.

One.2. The mating mode is not on TWS headphones (overhead/full.Size) is usually turned on by a separate button or click on the power button. See the instructions for your headphones if it does not work.

The task is to go to the headphone mating mode so that the headphone indicator changes its condition. This is usually a blinking of an indicator or color change.

Go to the LG TV menu → Sound → Audio Exhibition → Choice of the device → After that you will find Bluetooth devices and the search will start automatically.

If you have a different version of the firmware, then the task is to go to the Bluetooth settings and turn on the search mode for devices.

Your headphones should appear in the list of available devices. Connect Bluetooth headphones to LG TV.

If the TV is not equipped with a built.In Bluetooth module

There is also a technique that is deprived of a built.In module. In this case, to connect the Bluetooth. Headset to the TV you need to purchase an external transmitter (receiver/adapter). Similar Bluetooth adaptors work from an additional power source and are connected through a USB-intense, RCA (“tulips”), a 3.5-mm mini-jack, or through an HDMI port.

Как слушать звук в наушниках с телевизора, если нет выхода на наушники

Connection is controlled through the TV menu and less often through the receiver itself. TV must define a transmitter as an external Bluetooth device. The user can only turn it on, putting a checkmark opposite the name of the adapter.

How to connect columns to a TV? How to connect headphones to a TV?

This can be done by any of the above methods. To find out how to connect the speakers to your TV with Smart TV, you should take into account the type of system and outputs available on each individual Samsung or LG model.

Keep in mind that Smart TV is equipped with a Wi-Fi module, which allows you to use another method of wireless connection (of course, if the AC itself supports this option). The procedure is similar to the synchronization algorithm for Bluetooth, but in the settings you will need to enter Wi-Fi, and then find the required name and confirm the connection.

As you can see, you can connect any type of columns to modern TVs. The way out can be found even when the ports and modules do not match.

How to connect columns to a TV? Step.By.Step instructions, whether it is possible to connect the speakers to TV. FAQ from EARPHones-Review

How to connect columns to a TV? The article shows a step.By.Step guide whether it is possible to connect the speakers to the TV. Hyde and tips for connecting speakers to LG, Samsung and other brands. FAQ from EARPHones-Review. Help and advice! Characteristics ratings reviews advice

Connection of headphones through an optical port

Some models of modern and not very TVs have a digital optical (Digital Audio Out) port that provides the transmission of an audio signal in the highest quality. It looks as follows:

However, headphones who could reproduce the sound from an optical cable directly exist. But there are special adapters for processing an optical signal called “optical-analog converters” or generalized by “digital-analog converters” (DAC). These devices, depending on the design, can display an analog audio signal to standard mini-jack 3.5mm or RCA ports (more often both options). Here is an example of one of these converters:

And it looks like a cable connected by one end to the TV, the other to the converter:

There are more exotic optical adapters that can convert an audio signal from the TV into a Bluetooth signal:

But it makes sense to use such a converter only for owners of wireless headphones experiencing difficulties in connecting to the TV itself.

Wired headphones

Almost all modern TVs are equipped with standard 3.5 mm connectors such as mini-jack. While the headphones themselves can have a specific output-professional 6.3 mm, USB or some other.

Advice! Before buying a headset, it is necessary to clarify the type of audio partition on both devices in order to avoid unnecessary problems.

In a good half of cases, the connection integration is located on the rear panel of the TV, less often on the front part. The port is always indicated either by Latin letters or a specific icon.

Mini jack 3.5 mm

The connector is a set of three cylindrical contacts separated by plastic or rubber inserts. Connecting such headphones is very simple. First we find the appropriate exit on the TV. Most often it is designated as h/p outo, audio or earphone. Sometimes instead of a letter there is a headphone icon.

It is necessary to insert the connector to the stop without leaving the gaps between the metal pin and the body of the plug. If you connect wired headphones, then external acoustics should turn off. Otherwise, you need to switch the method of output of the audio in the menu in the “Sound” section.

Using adapters

If you need to connect the headphones to the old TV or to the modern model without a 3.5 mm output, then you can not do without an adapter. Or less modern models are equipped with linear outputs for working with external acoustics of the RCA type (“tulips”).

To connect headphones through “tulips” will need a special adapter. At one end, there will be a port of 3.5 mm, and on the other. Two red and white plugs. We find the Audio Out linear on the TV and connect the adapter to the intenses corresponding to the colors.

Important! If the technique is designed to work with multi-channel acoustics of the 5: 1 format, then there will be at least 5 RCA blocks on the panel. In this case, connect the adapter to the connectors with the inscription Front L/R.

At the time of connection of headphones through the adapter, the columns, as a rule, do not turn off themselves. Therefore, in the menu (section “Sound”) it is necessary to switch the option of output of audio. If the TV is completely old and is not equipped with a linear RCA output, then the headset will have to connect through the Scart-Inteatheis using a couple of adapters: Scart. RCA and RCA. Mini-jack.

How to connect a Bluetooth nasheld to the TV?

Connecting headphones to the TV is a simple and largely identical conjugation with any other devices. The corresponding Bluetooth module should be built into it. If it is not there, conjugation can be carried out through a TV setup, special external adapters, game consoles.

The connection is as follows:

  • Wireless headphones must be transferred to search mode. If they are turned off, hold the power button for several seconds (when you turn on the device, a characteristic signal will give).
  • Next step. Go to TV settings. They will have a “search for Bluetooth devices” (it is located in sound settings).
  • Open the menu of this item and find the name of your device in it.
  • The last step is the establishment of a conjugation. Now you can watch TV through headphones.

How to connect headphones to LG TV?

The fraud of the headset with the LG brand device, if it has a Bluetooth module, does not differ from the step-by-step guide described above:

  • We go to the Bluetooth menu, select the “Bluetooth headset” item, click “OK”.
  • In the list of devices, you need to select the model you want to connect.
  • Enter the PIN code (it should be indicated in the instructions, most often in factory settings is indicated 0000).
connect, headphones

What to do if there is no bluetooth module? Then you need your smartphone at hand. The algorithm of actions is as follows:

connect, headphones
  • On the remote control, find the Smart Hub button and press it.
  • The code will appear on the screen. It must be scanned using a smartphone to install a special application called “LG TV Plus”.
  • After starting the program in the list of proposed models, you need to find your TV model.
  • A PIN code will be displayed on the TV screen that activates the application: it will become an identical remote control.
  • Find in the application menu the item “Agent Bluetooth”.
  • Turn your headset in your search mode.
  • The conjugation and control of the device is carried out through a smartphone. You just have to choose your model of a wireless headset.
  • When you want to return to the speakers again, in the application you will need to select “Connect to the dynamics of TV”.

How to connect headphones to Samsung TV?

Most of the models produced by Samsung are already equipped with a Bluetooth module. However, there are their nuances. Only subwoofer, mouse or keyboard are directly connected to older models. Bluetooth headset through this channel cannot be connected. That is why a special Bluetooth transmitter and digital-analog converter are needed. These two devices are in pairs are responsible for the conjugation of the headset with the TV.

The procedure for connecting the Bluetooth lungs to the TV is as follows:

  • In any store of television equipment, you purchase a Bluetooth resident and digital-analysis converter.
  • The digital-analysis converter must be connected to the optical output of your TV, and the receiver to the audio entrance.
  • In the standard way, set up the fraud of headphones with a Bluetooth transmitter.
  • In the TV menu, select the item “Sound output through the external device”.

Ready! Headphones to the Samsung TV are connected.

How to connect wireless headphones to Sony TV?

By analogy with previous stamps, Sony Bluetooth headset can be connected to the brand devices in all of the above ways. You need to have a TV model with a built.In module and act according to the instructions from the first point of our article. If it is not, then the headset can be connected using an external receiver or through one of the other external devices that we will write below.

One. How to connect wireless Bluetooth headphones to TV?

Below the instructions how to connect wireless headphones to the TV if the TV has a built.In possibility of connecting via Bluetooth (built.In Bluetooth module).

  • We turn on wireless headphones and the search mode for devices on them. Typically, for this, you need to keep the power button for 5-15 seconds to the sound signal. Or separate Bluetooth button. On TWS, this is a button on the case or opening a case. Read more about the conjugation. In our instructions or in the documentation for your headphones.
  • We go to the TV settings and search for Bluetooth devices. Usually this can be done in the sound settings, there should be options for sound devices: audio output, device dynamics, loudspeakers, and the like. Among them should be Bluetooth. Or just in the connection options.
  • In the submenu “List of Bluetooth devices” (maybe a similar name, is in the device or sound menu), select your wireless headphone model.
  • We conjure (connection). Ready! Bluetooth headphones are connected to TV.

This general instruction how to connect wireless headphones to the TV is suitable for any TVs with built.In Bluetooth. With different TV models, setting is different, but the principle is the same.

We connect the headphones to TV through other inputs

There are several common integrates that (all or some) are necessarily on modern TV models:

4 ways to connect wireless headphones to any TV (CNET How To)

  • RCA. He is a composite audio output, aka Tulip. There can be many such color outputs on the TV. We need two that are signed by Audio. They are always signed. Usually highlighted in white and red. How to connect the “connector” of headphones to the TV, if a 3.5 mm mini-jack is not RCA? Buy an adapter: 3.5 mm entrance (mother) for 2 RCA outputs (plugs, dad). They also come in different colors, but one of them is necessarily red, we connect to the red exit on TV, and the second to the second audio output.
  • Optics. A small connector of an intricate angular shape. Such an output is usually designated as Optical, Digital Audio Out or S/PDIF. How to connect headphones to the optical audio output of the TV? It will already be required not just an adapter, but an adapter-converter. A digital signal is given in optics, for headphones it must be converted into analog. Finding the desired adapter of 3.5 mm is not difficult.
  • HDMI. A very common integration. He is in any modern TV. A digital signal is transmitted through it, respectively, it also needs to be transferred to analog. We purchase an appropriate converter from HMDI by 3.5 mm.
  • Scart. Already outbuilding its time, which was very popular before the mass arrival of HDMI. Large with many contacts. It is signed as scart and \ or rgb. To connect headphones to it also requires a converter. But most of these devices are adapters from RCA to Scart. Accordingly, 2 links will be required: with SCART to 2 RCA and with RCA by 3.5 mm, which is mentioned above.
connect, headphones

A 3.5 mm adapter adapter from optics by a 3.5 mm adapter-converter with a 3.5 mm hmdi SCART SCART SCART adapter on RCA

connect, headphones

If we are talking about additional converters, then there is another option. Receiver \ prefix \ home theater. It connects to the TV by one of the above intenses and usually has an entrance for headphones 3.5 mm or 6.3 mm.