How to connect wired headphones to iPhone

iPhone X(s/r)/8/7/6 cannot see wired or wireless headphones

Mobile gadgets from the manufacturer Apple are known for quality and reliability of operation. However, during the use of iOS devices owners may encounter various problems. For example, if you have headphones plugged into your iPhone, you will hear sound from the speakers, the system will say there is no headset, or the headphones are plugged into the phone but there is no jack. First, determine what is wrong: the “ears” themselves or the problem comes from the device. Depending on the nature of the problem, you will need to choose the best solution.

Usually a faulty jack is the reason why iPhone does not see wired headphones. In addition to problems with the jack, the cause may also be a failure of the audio codec (the iPhone sound chip). If this happens, not only will there be no sound in the headphones, but the sound will also be missing from the speakers.

If the iPhone is in headphone mode, which is not disconnected in the usual way, follow these steps:

  • clean the connector with a toothpick
  • Blow dust off the jack
  • Reboot the device with the headphones on
  • turn on speaker mode
  • adjust the volume
  • Turn off Wi-Fi.

Open “Settings” “Universal Access” “Audio Material” “Headphone Adaptation”, then turn on the “Headphone Adaptation” option. Tap “Custom Audio Setup,” then follow the on-screen instructions. Or manually configure any of the following options.

  • Place the headphones next to your iPhone and open the case cover.
  • Go to “Control Panel” → “Manage Music.
  • Click on the AirPlay icon and select two headphones to play from the list.

In order to get the default volume back, you need to turn off restrictions in “Settings” → “Basic” → “Restrictions” menu, and set the maximum volume in “Settings” → “Music” → “Volume Limit” menu. See also: A selection of the best iPhone headphones for all occasions

  • Go to Library, Preferences tab. In the com file. Apple. celestial.
  • Then edit the plist document. There you will see the name of the regions and the sound value. For example, it can be 83%. It is necessary to set it to 100% (number 1).
  • Reboot your device. After that, the smartphone should give out the sound at full power.
See also  How to make call recording on iPhone


Obviously, before you start setting up the headphones, they need to be paired with the iPhone. Depending on whether an Apple-branded accessory or a third-party product is used, this procedure has differences.


Pairing of Airepods with iPhone, irrespective of the model of the former and the latter, is performed automatically. All you need to do is to open the charging case, put it near your mobile device and follow the simple instruction on the screen. We discussed this procedure in more detail in a separate manual.

connect, wired, headphones, iphone

If there are any problems during the device pairing process, the following article on our website will help you find out the cause and fix it.

Other brands of headphones

The algorithm of connection of wireless headphones from third-party manufacturers differs slightly from the one in the above case, but it cannot be called complicated. Yes, it is done manually, not automatically, but it does not take more than a minute and does not require any special effort. This is explained in more detail in the material presented in the link below.

Usually the solution to the problem voiced in the title is not difficult, but before we proceed to consider it, let us note the following:

connect, wired, headphones, iphone

This article will show the algorithm of connection of wireless headphones, which is applicable to the products of any manufacturer except Apple. The topic of creating a pair of iPhone and Airpods will not be touched by us. these devices are paired automatically and without any problems or nuances, and the process itself is accompanied by step-by-step tips on the screen.


In order to pair your iPhone and Bluetooth headphones, follow the following algorithm:

Everything Wrong With Apple’s Dongles | Untangled

  • Make sure that Bluetooth is enabled on your iPhone. If necessary, activate it from “Control Panel” (swipe up from the bottom of the screen to call) or through “Settings.
See also  How to make two screens on your iPhone

Note: If you don’t know the name of the accessory you’re using, look for that information on its case, packaging, or instructions.

Note: Some wireless accessories require a PIN or passkey to pair with mobile devices. Usually the combination you need is indicated on the packaging or in the user manual. It can also appear right on the screen.


To temporarily disconnect Bluetooth headphones from your iPhone, just tap their name in the list of paired devices or simply turn them off. If you need to break a pair permanently or for a long time, do the following

Tip: You can control the connection of wireless accessories directly from the control panel (by swiping up from the bottom of the screen), and from there you can go to wireless settings.

Solutions to possible issues

In some cases, iPhone may not see Bluetooth headphones that are turned on and in discoverable mode, or it may see them but not connect. To resolve these issues, perform the following steps one at a time, and after each step, try to pair the devices again.

  • Restart your iPhone, and turn the wireless accessory on and off. Re-enable Bluetooth on the first device and set the second to discover mode. How to reboot the iPhone
  • Make sure that the headphones are charged, and that the mobile device is not in power-saving mode. How to turn off the power saving mode on iPhone
  • If the accessory has previously connected to your iPhone and there have been no problems with their connectivity, break up the pair using the recommendations in the article of the same name, then follow the steps necessary to create it.
  • If the headphones are currently paired with another mobile device (the connection may or may not be active), break that connection and try connecting them to your iPhone, pre-setting them in discoverable mode.
  • If you use a proprietary app with your accessory, check to see if it is allowed to access Bluetooth. To do this, go to Bluetooth Privacy Settings and make sure that this option is active for the desired program.
connect, wired, headphones, iphone

If the above recommendations have not resolved the issue and the problem occurs with one of the symptoms listed below, contact Apple Support here.

  • Cannot activate Bluetooth on iPhone or the option is inactive;
  • Not only the headphones you use will not connect to your iPhone, but also other wireless accessories.
See also  How to remove the time limit on the iPhone

Airpods and other Apple headphones do not require additional apps when connected to iPhone. Many quality models from well-known manufacturers (Sennheiser, Sony, Marshall, etc.) have branded iPhone apps. Same as for Android. But all models can work without special applications.

As a rule, the reason why iPhone does not see wired headphones is a faulty jack. In addition to a connector problem, the audio codec (iPhone sound chip) may also be broken. In this case the sound is lost not only in the headphones, but also in the speakers.

Usually a faulty jack is the reason the iPhone can’t see the wired headphones. In the case of audio jack 3.5 it often gets clogged with dust and dirt, foreign objects and various liquids get inside. It causes corrosion of the jack itself, or the internal contacts.

Open “Settings” “Universal Access” “Audio Material” “Headphone Adaptation”, then turn on the “Headphone Adaptation” option. Tap “Custom Audio Setup,” then follow the on-screen instructions. Or manually adjust any of the following settings.

  • Check the lightning connector for clogs or foreign objects;
  • Check the condition of the headset (whether the cable is broken or the headphones themselves are damaged);
  • if your device has a case, remove it and try to reconnect the headphones;

If your iPhone can’t see your headphones, there are likely three possible reasons for this. First, a problem with the operating system. Sometimes such a problem can be solved by simply rebooting the device, but most often it can be corrected by reflashing. Secondly, the plug may be dirty.