How to connect your computer to the internet

How to connect your computer to the Internet

Today we’ll deal with the question, how to configure the Internet on your computer or laptop. Typically, the Internet set up an employee of the provider at the time when you sign a contract with him for services. in fact the correct access to the World Wide Web is an indicator of the performance of this service. However, later on, when reinstalling Windows or buying a new computer settings of the Internet can be lost, and here we face a dilemma. to call technical support or do everything with your own hands. In fact, this task is not complicated at all, so if you read this article to the end, you can save money more than once.

The most common type of connection is cable. you are pulled through the apartment wire with a special LAN connector at the end, which is inserted into the network card in the case PC. However, depending on the provider, there are several types of network connection. How to properly configure the Internet and how to Connect to the World Wide Web, should be specified in the contract papers that you were given at the initial setup of the Internet employee. There are a few of them: automatic IP, static IP, PPPoE, L2TP, MAC filtering. Let’s look at them in order.

How do you connect all the computers to the Internet through one computer?

Have you ever wondered how to connect all the computers in your class to the Internet, through one computer. I think so, because I have heard this question from many computer science teachers more than once.

I personally have long been interested in this question, t.к. It gives us an advantage. For example, you can restrict or deny Internet access, control traffic. Of course, you can do this with third-party software, but we are going to use Windows tools only.

So, let the connection be through the teacher’s computer and we will call it a server. The student computers I will refer to as client computers.

Make settings on the server:

Log in to the server with an administrator or owner account.

Click the Start button and select Control Panel.

Click on Network and Internet Connections.

Click on the Network Connections link.

Right-click on the connection that should be used to connect to the Internet.

Click Properties.

Click the Advanced tab.

Under Internet Connection Sharing, check the Allow other users to use this computer’s Internet connection checkbox.

When using a remote Internet sharing connection, select the Set call on demand check box to allow the computer to automatically connect to the Internet.

Click OK. The following message will appear: When Internet connection sharing is enabled, an IP address will be assigned to the LAN network card. Communication with other computers on the network may be lost. If other computers are using static IP addresses, configure them to use dynamic addresses. You do want to enable Internet connection sharing?

Connection to the Internet will be available to other computers on the LAN. Set up a static IP address and subnet mask for the LAN NIC.

And now the settings for the client PCs

Log on to the client PC with an administrator or owner account.

Click the Start button and select Control Panel.

Click on Network and Internet Connections.

Click the Network connections link

Right-click on the Local Area Connection icon and select Properties.

On the General tab, select the Internet Protocol (TCP/IP) option from the Components used by this connection list, and then click Properties.

In the Properties: Internet Protocol (TCP/IP) dialog box, select Obtain an IP address automatically (if not already selected) and click OK.

These settings should be made on all the client PCs. The IP addresses should be dynamic so that they do not conflict. After making these settings on the student’s computer, you can just launch the browser and type in a website address, such as 🙂 to make sure that the connection to the Internet is established.

By the way, with these settings it becomes convenient for us to delimit access to the Internet with the program NetOpSchool (management and control of computers in the local network).

For example, by setting a certain policy we can prohibit access to the Internet for a certain group of computers. Or just restrict access to certain sites. And you can allow to use only one or more addresses on the Internet. This is very handy when you go over Computer Communications and the Internet.

I hope you found something useful in this article. I look forward to your feedback, additions and questions in the Комментарии и мнения владельцев just below. Thanks.

Connecting a Wi-Fi Adapter to a PC

The connection of Wi-Fi adapter to the computer is not complicated: if it is a USB adapter, just insert it into the appropriate port of the computer, if internal. then open the system unit of the switched off computer and put the card into an appropriate slot, you can not make a mistake.

The device comes with a CD with drivers and even if Windows automatically detected and enabled the wireless network access, I still recommend installing the supplied drivers, as they can prevent possible problems. Note: If you are still using Windows XP, make sure that this operating system is supported before buying an adapter.

Once the adapter is installed you can see the wireless networks in Windows by clicking the Wi-Fi icon in the system tray, and connect to them by entering your password.

Cell phone as an access point

The easiest way to connect your computer to the Internet via your cell phone is to use the “Access point” function. This function is available in most modern smart phones.

After turning on the “Access point” function, your cell phone will work as a regular Wi-Fi router, creating a Wi-Fi network with access to the Internet. It’s enough to connect to the given Wi-Fi network to make your computer have Internet via your cell phone.

It should be noted that using the “Hotspot” function has a number of disadvantages:

connect, your, computer, internet
  • Not every cell phone supports this feature. As a rule, only advanced smartphones provide this possibility.
  • Using the “Hotspot” function drains the battery of your cell phone more quickly.
  • Using the “Access point” function leads to increased consumption of Internet traffic.
  • Wi-Fi module must be installed on the computer to connect to the access point.

Your computer is having trouble connecting to the router with a network cable

Once connected, the status on the notification panel may not change, you will see the computer crossed out with a red cross.

In this case, first of all you need to check the cable that connects your computer to the router. How to do it? You can take for example a different cable, or a cable that carries the Internet directly to your computer. If this connection status changes (even if a yellow triangle appears). Then the problem is in the cable. Maybe something went wrong there. Simply change it.

It is possible that the network card is simply disabled. Let’s check. Go to Control Panel/Network and Internet/Network Connections and look for Local Area Connection. If it has the status Disabled next to it, then right click on that connection and select Enable.

If there is no such connection as a Local Area Connection at all, then most likely the driver for your network card is simply not installed. Download and install the driver. If your computer (laptop) came with a disk, it is likely that this driver is on it.

connect, your, computer, internet

How to connect your computer to the Internet

The algorithm of actions differs, depending on the situation that led to the lack of access to the Internet. If we’re talking about a cable connection, here are the most common cases:

The network card driver is not working properly;

Lanet network provider uses a system to register each device in their network by mac address. So if the new computer does not connect to the Internet, register its physical address. You can do this by contacting the technical support provider or in your personal cabinet. After registering the mac address you must restart the connection by disconnecting the cable from the network adapter and plugging it back in. Then check Internet connection.

If after reinstalling your operating system your computer can’t see the network, your network card driver might be installed incorrectly. To verify this, open the “Network Connections” window and check the status of your local network connection (“Ethernet”). If you see “The network cable is not connected” but it is, in fact, connected to your computer, you probably need a wizard.

How to connect a PC to the network

Contributor(s): Jack Lloyd. Jack Lloyd is an author and editor writing about technology for wikiHow. Has more than two years of experience in writing and editing articles on technical topics. Enthusiast of all things technology-related and English teacher.

Number of views on this article: 9668.

In this article you will learn how to connect your Windows computer to the Internet. You can connect your computer to a wireless network by using the appropriate option on your computer, or you can connect directly to a modem or router with an Ethernet cable. Keep in mind that connecting to a network is different than setting up a wired computer network (e.g. in an office).

  • Some modems have a built-in router.
  • To check your Internet connection status, check the appropriate indicators on your modem and/or router. If your Internet connection is unstable, use an Ethernet cable instead of a wireless network.

Turn on the wireless module if necessary. If “Wi-Fi off” is displayed at the top of the pop-up menu, click on the “Wi-Fi” icon in the lower left corner of the pop-up menu.

  • If the name of the desired network is not on the list, place your computer closer to the router/modem.
  • The network name will most likely include the name of your router/modem, its model and/or manufacturer.
  • If you haven’t changed the default password, you can find it on a sticker on the bottom or back of your router (or modem with router).
  • If there is no password for the network, just click “Connect” to connect to the network.

Wait for your computer to connect to the network. Once this happens, “Connected” will appear under the network name. You are now ready to use the Internet on your computer.

  • Some modems have a built-in router.
  • If you don’t want your mobile devices or other users to connect to the Internet, you won’t need a router. in this case, connect your computer directly to the modem.
  • Buy a cable long enough to run from your router or modem to your computer, especially if your computer can’t be moved.
  • The length of the Ethernet cable must not exceed 100 meters, and the maximum effective length is usually 90 meters. [1] X Source of Information
  • There is usually only one Ethernet port on the modem, which is marked with the word “Internet”. The router is connected to this port.
  • If you connect your computer directly to the modem, first disconnect the router from the modem’s Ethernet port.

How to disconnect from a Wi-Fi network in Windows 11

If you want to disconnect from Wi-Fi, for whatever reason, the process is as simple as connecting to Wi-Fi. First, follow the same steps we showed in the previous sections of this manual. When you get to the list of Wi-Fi networks, select the one you’re connected to and click “Disconnect”. Here’s what it looks like if you use the Quick Actions panel to go to the Wi-Fi list:

And here’s what you need to do if you decide to use the Settings app to disconnect your Windows 11 PC from Wi-Fi:

Have you encountered any problems connecting to Wi-Fi in Windows 11?

Now you know how to connect to Wi-Fi in Windows 11 manually. As you’ve seen, it’s a simple process that anyone can handle. Were you able to easily connect your Windows 11 computer to Wi-Fi, or did you encounter any problems in the process?? Let us know in the Комментарии и мнения владельцев below.