How to distribute the Internet on Xiaomi redmi

Xiaomi does not distribute the Internet over Wi-Fi, how to fix

Xiaomi (Redmi) smartphones have a built-in function to give out the Internet via Wi-Fi, which the phone itself receives via the cellular network, no matter what generation.

Its essence is that when you activate the transfer of the Internet phone turns into a Wi-Fi point, which can connect up to six subscribers. But the more clients connected to the smartphone, the lower the overall data transfer rate and communication quality.

In the vast majority of cases, the function on Xiaomi works properly, but sometimes for some unknown reason, distribution stops without notification or displaying a warning or error message.

And here we encounter a very unpleasant situation, which is the Android operating system, but most importantly, the MIUI user shell.

The interface of modern phones is designed mainly for consumption and use by unprepared people without deep technical knowledge, which means that it is simplified as much as possible, and the vast majority of settings and functions are given to automation.

How to distribute Internet via Wi-Fi from Xiaomi (Redmi) to other phones or computers

It’s good when you have a cellular provider plan with a large amount of traffic, which you do not have time to spend in a month on Xiaomi. But what about those who do not have such an impressive amount of capacity, or those who come to visit you from another country and the tariff does not imply the use of voluminous Internet traffic?

The “Wi-Fi hotspot” feature available in Xiaomi smartphones comes to the rescue.

When the mode is active, Xiaomi gives out the Internet at the expense of the cellular network.

To activate the function go to the general settings and find there the item “Wi-Fi hotspot”. To turn on the mode, click on the button “Wi-Fi Access Point”, so that the switch becomes active. Once it’s activated, the smartphone will disconnect from the Wi-Fi network, if it was connected to it, and will start using the cellular network as source of internet. Below the point “Setting”, nothing complicated in the setting, do not be afraid of.

  • SSID. is the name of the network you have created, the name can be anything within reason.
  • WPA2 PSK is a method of encrypting traffic, I do not recommend changing this value, leave it like this.
  • Password. for the Wi-Fi network, so that only the people you know and have been given a password can connect. This is important for security, never disable the password.
  • Device identification. leave it set to “Access point”, otherwise other devices will not see your network.
  • Wi-Fi frequency range. depending on the model of Xiaomi phone you can choose 2.4 Hz or 5 Hz. Theoretically, the network at a frequency of 5 Hz will work faster, but the range will be significantly reduced, I recommend setting the frequency to 2.4 Hz.

It is possible to use a QR code for an instant transfer of the login and password for connection to another phone, the function of the Code for connection to the point is responsible for this. It is enough to click on this menu, at the screen there will be a QR code, which should be scanned from the other smartphone, if it succeeds, it will connect to Xiaomi. We have dealt with the settings, now let’s have a look at the other menu items. Next on the list is “Single traffic limit”. This value will allow you to set the amount of traffic for each of the devices connected to you for one session, so they do not get cheeky. After all, you are using the Internet from a mobile network, where, although the traffic limit may be large, 20 GB or even 30 GB, but it is final. If your friends connect to you and start watching 4K YouTube videos, even that impressive limit will be used up. To prevent this, and there is this setting, by default, it is disabled, I recommend setting the limit not more than 1 GB, so as not to cheek. Auto Disconnect is a useful feature that disconnects the Internet distribution through Xiaomi, if there has been no connection to it in the last 10 minutes. People forget to unplug, it drains the battery. This setting will help save it. Leave it active. Connected devices. this section displays all devices connected to Xiaomi Wi-Fi. For example, I connected an old Windows Phone and instead of its name I got its address. If you connect a modern smartphone or laptop, it will have its normal name. So you can track who is connected to your network, how much traffic they spend, and you have the ability to forcibly disconnect a particular device. Once set up once there is no need to go back to the depths of the menu again and again, when you need to turn on the distribution of the Internet again. There is a special icon in the shortcut menu in the notification bar. To pull it out unlock your phone, bring up the shortcut menu and find the “Sorting” icon. Now you are open not only the active commands, but also hidden, among which you need to find the icon “Hotspot”, and then drag it to the open area and click on the button “Done”. Now you can start streaming the internet with Xiaomi in one click.

See also  The computer does not see Xiaomi via USB

How to distribute the Internet on Xiaomi (Redmi) via Wi-Fi or USB

When actively using the network, sometimes you want to give out the Internet via your Xiaomi smartphone (Redmi), but it is not obvious how to do it, although, intuition suggests that the solution should be simple.

That’s partly true, but before you share the Internet, carefully read your tariff of the cellular operator you want to share access to. Make sure that you have enough traffic so that you do not end up in debt to the operator.

From a Xiaomi smartphone, it is possible to distribute in two ways:

    ; ;

  • Via Bluetooth. Unfortunately, I do not have a second Bluetooth device that can connect to the phone for this purpose, so I can not give a detailed description. Let me just tell you where the necessary settings are: Wi-Fi hotspot. Bluetooth modem. When you activate the function, the Bluetooth-connected device should automatically access the Xiaomi Internet.

How to distribute the Internet from your phone Xiaomi

First faced with the question of how to give out the Internet on Xiaomi, some smartphone owners can not cope on their own and begin to brand the manufacturer. And in vain. if you clearly follow the algorithm, the device begins to distribute a wireless signal without fail.

There are several ways to turn on Wi-Fi giveaway on Xiaomi:

Switching on the modem mode on the device and giving out Internet via USB

Like most flagship smartphones, almost all phones in the model lineup of Xiaomi are able to work in portable modulator mode and distribute the Internet in the village to others. You need to know how to turn on modem mode on Xiaomi.

  • Before you turn on the USB modem on Xiaomi, you need to connect your phone to your PC or laptop and set the charging mode.
  • Go to the top menu by pulling the “curtain” down and clicking on the gear icon located in the upper corner on the right.
  • Select “Additional functions”.
  • Click “USB modem”.
See also  How to enable developer mode on Xiaomi

Done. the computer receives traffic from the smartphone. This function is indispensable in travels or at the cottage, where there is no opportunity to connect to wired Internet, but there is a good signal from the tower of the mobile operator. The main thing to remember is how to enable modem mode on Xiaomi.

Не работает интернет на телефоне что делать? После обновления перестал работать интернет на Xiaomi?

Internet distribution via Wi-Fi

Xiaomi is able to work and as a router, providing wireless devices access to the global network. To do this:

To protect the network from third-party connections, you must manually set the parameters available in the “Wi-Fi hotspot settings” tab.

  • On the SSID tab enter the name of the network. The default device will offer the model name.
  • Go to “Protection”.
  • Select WPA2 PSK mode.
  • Set password.
  • Go to the “Device Identification” field.
  • Select the frequency range. 2.4 GHz or 5 GHz. The smartphone will choose the first one by default.
  • Click the checkmark in the top right corner of the screen.

Then it is necessary to set traffic limit. The instructions are as follows:

  • Section “Wi-Fi hotspot”.
  • Activate “Single traffic limit”.
  • Go to “Traffic limit”.
  • Click on “Special.
  • Set the amount.
  • Click “If exceeded”.
  • Select action. Available. disconnection or notification about spent traffic.

Now in order to get an active access point it is enough to activate this function simply by pressing the button. You can also set the mode of automatic shutdown. It will be triggered when the gadgets that use Wi-Fi are disconnected.

How to share Wi-Fi on xiaomi. Access point for distributing the Internet on xiaomi redmi.

Internet sharing via Bluetooth

Also Xiaomi can be used as a Bluetooth modem. To do this, you need:

  • In the “Settings” folder, select “Advanced Features”.
  • Click on “Bluetooth Modem.
  • Then you need to activate Bluetooth on your computer or laptop and click “Add device”.
  • After the equipment finds the smartphone, press the “Link” button and confirm the action on both devices by entering the pin code.

With this method of connection, the Internet can be used only from the connected device.

Before turning to the ways of activating the function, it is necessary to focus on some aspects that will help to avoid misunderstandings. Internet sharing option is available on all devices based on the current version of Android, including Xiaomi Redmi 8. The principle of its operation is that the phone starts to be used as a Wi-Fi access point, that is, it becomes a kind of router for other gadgets.

For the function of the option on Xiaomi Redmi 8 must be active 3G or 4G mobile Internet, and Wi-Fi. disabled. But even this is not enough, because mobile operators can put their own restrictions. In particular, holders of tariffs with unlimited Internet will not be able to distribute traffic. In most cases, the option works only on plans with a limited gigabyte package. However, this information should be clarified with your operator.

See also  How to speed up internet on iPhone. Support ipv6

Before turning to ways to activate the function, it is necessary to focus on some aspects that will help to avoid misunderstandings. Internet sharing option is available on all devices based on the current version of Android, including Xiaomi Redmi 9. The principle of its work is that the phone starts to be used as a Wi-Fi access point, that is, it becomes a kind of router for other gadgets.

Как раздать интернет на Xiaomi или точка доступа

For the option to work on Xiaomi Redmi 9 must be active 3G or 4G mobile Internet, and Wi-Fi. disabled. But even this is not enough, because mobile network operators can impose their own restrictions. In particular, holders of tariffs with unlimited Internet will not be able to distribute traffic. In most cases, the option works only on data plans with a limited gigabyte package. However, this information is worth checking with your operator.

Before turning to ways to activate the function, it is necessary to focus on some aspects, thanks to which it will be possible to avoid misunderstandings. Internet sharing option is available on all devices based on the current version of Android, including Xiaomi Redmi 9C. The principle of its work is that the phone is used as a Wi-Fi access point, i.e. it becomes a kind of router for other gadgets.

For the option to work on Xiaomi Redmi 9C must be active mobile Internet 3G or 4G, and Wi-Fi. disabled. But even this is not enough, because cellular operators can set their own restrictions. In particular, holders of plans with unlimited Internet access will not be able to distribute traffic. In most cases, the option works only on tariff plans with a limited package of gigabytes. However, it is worth checking this information with your operator.

Go to Settings on your Xiaomi Redmi Note 8 Pro phone. Go to section Wi-Fi Access Point. Select Wi-Fi hotspot setup. Set your Wi-Fi access point name and password (at least 8 symbols).

How to share the Internet with your Xiaomi phone

  • Open the Menu and enter the phone Settings
  • Open the “Wi-Fi hotspot” section
  • Set the switch to “ON.
  • Set your Wi-Fi network name and password.
  • That’s it, you turned on the Internet sharing on your phone Xiaomi.

Sharing the Internet via Bluetooth

Note: in order to use this method you need to have a Bluetooth adapter installed on the connected device. In this case the network sharing is possible only for one device. The computer will be the internet distributor in this case. In the main menu, find the settings section, select the “Advanced” subsection. Before this it is necessary to activate Bluetooth. Cell phone should be visible to other gadgets. Activate the Bluetooth modem mode.

On your computer, you should see a Bluetooth icon at the bottom right, click on it and select “Add Bluetooth devices. When the cell phone is detected, select it in the list and click on “Bind”. The smartphone screen and PC monitor will display a notification with the connection key. If both codes are the same on the PC and on the smartphone, click “Connect” on the phone and confirm your selection on the PC. Now the cell phone has an Internet connection.

distribute, internet, xiaomi, redmi