How to duplicate the iPhone screen to the TV

Ways to connect iPhone to TV

Information can be transmitted to your TV via wireless and wired connections, special apps and add-on devices and decoders.

Because you can watch videos from your iPhone on your TV using several options. Let’s take a closer look at each method and identify their pros and cons.

Duplicating the screen from your iPhone to your TV through a wireless HDMI receiver

Every modern TV has one or more HDMI ports. This technology allows you to transmit high quality video data at high speed.

You can output video from your iPhone by directly connecting a cable between your phone and the TV’s HDMI port. You can even show movies in high quality without delays. And it’s available for all Smart TVs and regular TVs with the appropriate connector regardless of model: LG, Samsung, Sony, etc.

No need to install additional software, but you’ll need Apple Lightning (or a 30-pin connector for earlier models) and an HDMI/VGA port. But accordingly, you’ll need to buy an Apple AV cable and a Lightning Digital AV adapter.

  • The equipment is switched off;
  • Plug one cable into the HDMI port on the TV and the other into the AV adapter;
  • Connect the adapter to your iPhone;
  • Both devices should now be turned on;
  • After turning on, the necessary connection should appear automatically.

If the automatic installation did not happen, do the following manually. Activate HDMI transmission in the iPhone settings and on the TV, select an HDMI source that is enabled (if more than one port is available).

Of the disadvantages, you may note that the connection requires a special wire and adapter; fortunately, the market offers a variety of options. And the presence of a wire reduces the comfort of using this method.

If you don’t have access to an HDMI jack, you can use a composite jack (otherwise known as a “tulip”) and an Apple Lightning VGA adapter. This option is suitable if the TV is equipped with an analog input.

The order of operations is as follows:

  • Connect the adapter to your iPhone.
  • Connect the cable to the TV (each plug must be plugged into the appropriate outlet). On a VGA cable, the audio input is connected separately.
  • Once the devices are connected, the settings should load automatically. If this does not happen, you will need to adjust the settings manually.
  • Switch your TV to the correct input signal. To do this, select iPhone as a signal source in the TV settings.
  • Now you can turn on video on your phone. over, earlier iPhone models will only display programs that play media content, while later models will duplicate the screen.

Composite and 30-pin connectors do not support Full HD streaming

Broadcast iPhone screen to TV via DLNA

First, we need to connect the iPhone or iPad to the same network of your home router. I think you shouldn’t have any difficulty with this. Similarly, connect the TV to the same network. this can be done via WI-FI or cable connection. In addition, the TV must support DLNA technology. information on this can be found in the documentation or on the Internet.

Then you need to go to the AppStore, find and download the program:

After launching, click on the broadcast button in the upper right corner.

Choose a file: photo, video, or music. You can also do the opposite. select the file first and then do a screen duplicate. The program is free, but it has ads, if you want to get rid of them, you will have to buy the program.

The principle of the application is about the same as in the past. you select a file and then broadcast it to the TV, which should appear in the list of devices.

See also  LG Smart TV capabilities

Everyone probably knows about this service. if you don’t have one, you can also download it from the AppStore. Once launched, open any video, and then click on the button with the screen and the wave.

NOTE! If there is no button, it means that the TV is not turned on or does not support this technology.

Then select “AirPlay and Bluetooth Devices.

Now we choose our TV from the list and connect to it.

Transfer the picture to the TV from your iPhone via USB cable

The following method requires the USB cable that was included when you bought your iPhone. Or you have to buy a new one.

You can display the iPhone screen on your TV as follows:

  • First we need to connect the technology to each other.
  • Your smartphone will then show up with the “Recognize as USB Mass Storage” option. Click on it.
  • Then set the TV to read media files (change this with the remote by tapping in the “Multimedia”, “Home”, “Source”, “USB” settings. depending on the company that makes your device).
  • Change the file format: to photo, audio, video.

Connecting your iPhone to your TV via WI-FI

What you will need to establish a wireless network connection:

The right module is built into almost all modern TVs, but it’s lacking in older and cheaper TVs. To make sure your device is capable of playing the signal sent directly from the iPhone, check the user manual or on the package. If it mentions SmartTV technology, you can safely use the iPhone connection method described below. Otherwise, it is recommended that you choose another connection method. This technology is implemented in the iPhone by default, so you don’t need to make sure it’s supported.

The first step in connecting your iPhone to the TV can be done in one of the following ways:

duplicate, iphone, screen
  • With a Wi-Fi router, you connect your TV and iPhone to a shared network.
  • Direct connection is achieved by activating the Wi-Fi Direct option. To do this, you need to activate it on both your phone and your TV. On the TV, the corresponding item is available in the “Applications” section. Or in the general menu.

Also Read: How to connect your phone to your TV: 8 ways to connect your smartphone to your TV

Now let’s take a closer look at how to connect your iPhone to your TV via Wi-Fi for playback

  • Download and open one of the apps on your iPhone that lets you stream shows directly to your TV. You can use iMediaShare or one of its later counterparts, such as Belkin MediaPlay, to connect.
  • Select the file you want to play on the wide screen from the list of available media and start watching. Don’t disconnect the wireless connection until playback is complete, or you won’t be able to complete the transfer.

Using the Chromecast media player

This device also allows you to display videos and photos on TVs. The device released by Google looks like a large flash drive and acts as an external Wi-Fi receiver. Serves users of TVs without built-in wireless network modules.

“The flash drive is much like the functionality of the Apple TV set-top box: it gives you the ability to connect to various resources on the Internet. The main difference is that it is much cheaper.

With Chromecast, it’s as easy to play the picture on your TV as it is with DLNA. To do this, you need:

Apple TV

This method requires the purchase of a more expensive accessory. Specifically, the AppleTV decoder. depending on its capacity. It is sold at the official Apple store.

To get full functionality, you must pair your set-top box and smartphone in the same Wi-Fi network. Obligatory condition: you must have a fresh version of iOS, otherwise there may be conflicts between the devices. In addition, this method is not suitable for owners of iPhone models below 4. This option has many advantages:

  • Using two devices in the same Apple ecosystem provides more options;
  • Controlling the action on your TV through Apple TV is much more convenient;
  • Watch content in high resolution up to 4K;
  • you can duplicate your phone’s display on the big screen;
  • Paired devices support high Wi-Fi signal strength.
See also  How to tie the Apple Watch to another iPhone

The disadvantage is the cost of purchasing this device. But don’t forget that you’re not just getting an “adapter” to your TV, you’re getting a whole decoder to watch unique content.

If the TV is not equipped with a Wi-Fi module or does not support applications for broadcasting content from the iPhone (iPad), you can use a special TV adapter that supports AirPlay, such as MiraScreen G2 WI-FI Display Dongle (even cheaper can be found on AliExpress at the link).

The connection scheme is very simple: plug one end of the HDMI/VGA cable into the TV and the other end into the adapter for Apple devices, then connect your iPhone to the adapter. You can also connect a charger to the second Lightning connector, so the battery does not run out.

What connects your iPhone to your LG TV

How to connect your laptop to the TV via wi-fi

By connecting your phone to the TV you can greatly expand the set of options, the default offered by LG. So, instead of the standard list of TV channels and the use of stationary players, you can start and finish dubbing the screen at any time. in fact, your iPhone turns into a projector, from which the broadcast takes place. Both devices retain their autonomy: the gadget won’t shut off while you’re watching.

Display the picture on the wide screen will allow you, in addition:

  • To use an Internet browser, particularly. to open the sites with a streaming video, select the data to download, to correspond.
  • Watch presentations, all kinds of demo videos, even read e-books.
  • Run any mobile applications that your iPhone supports. It can be games, special programs, for example, for the preparation of drawings, instant messengers and other applets.
  • At last, connecting your iPhone to LG TV allows you to enjoy full-screen viewing of video films, slide shows, photos stored in the gadget’s memory. Broadcasting starts automatically-just as long as the TV supports the codec you use.

Among other things you can always connect to LG additional equipment, including various touch pads, touch tablets, keyboards and even joysticks. All of these devices can make using the TV even more comfortable.

The first of the connection options described below involve the use of wires for synchronization. They provide the best quality of signal transmission, but they take space on the floor or require mounting on the wall. Wireless technology allows you to do without pulling cables, but requires a stable Internet connection. In addition, you can not exclude the temporary loss of connection. So, let’s start with the most reliable ways. using HDMI and USB cords.

Using the Apple TV set-top box

Another way to connect using wireless technology is to use an Apple TV Smart set-top box.

If you own such a gadget, follow the simple instructions:

  • Make sure your iPhone is connected to the same Wi-Fi network as the Apple TV set-top box.
  • Make sure your TV is turned on and sees the set-top box.
  • On your phone, open “Control Center” by swiping down the top right of the screen.
  • Tap “Screen mirroring” and then tap Apple TV.

Basic Principles

When it comes to connecting your iPhone, the first thing to understand is that it’s almost always real. You don’t have to have an Apple TV set-top box to be able to link it to your TV. Its presence can simplify the process, but its absence will not be critical. You will need to have suitable cables at hand, or an adapter, or another set-top box that allows you to turn any TV into a Smart TV device.

A similar connection would be great for viewing photos and videos. It will also allow you to duplicate the smartphone screen on your TV. This will give the opportunity to comfortably surf the Internet, play games, call your relatives by video call.

This method will be especially popular in cases when you invite your friends over and want to play a movie for them, without spending a lot of time to transfer the file with the movie to the flash drive.

Open the Control Panel. Tap the “Screen Replay” button, then select your Apple TV or Smart TV with AirPlay 2 support to play content. If the AirPlay passcode is displayed on your TV, enter the passcode on your iPhone.

See also  How to reset the lock password on your iPhone

Go to Kodi Settings (the gear icon) and tap Services. In the submenu on the left you’ll find the AirPlay tab, select it. Move the slider to the right of the “Enable AirPlay support” line.

Option 2. Using Mirror for LG Smart TV software

This software tool was developed by AirBeamTV BV and is available for download in the App Store.

Follow the link and start the installation. Note that the app is compatible with newer versions of iOS, from version 11 onwards.

To connect your iPhone to your LG TV, you need to:

  • Connect both devices to the same Wi-Fi network.
  • Find the installed application in the phone menu and launch it.
  • Then the device searches for a TV. Procedure doesn’t take long. In just a few seconds, the iPhone screen will display the name of your LG. Tap it.
  • The TV should display a system message stating that a new device is trying to connect to it. Using the remote control or the buttons on the body, you need to confirm by pressing the “Allow” or “Accept” button.
  • Next, you need to add the “Record Screen” button to the “Control Panel” of your iPhone and turn on “Program Access”. To do this, go to “Settings” menu and open the section called “Control Panel. In front of the “Program Access” option, set the switch to “On”. Then open the Setup item here.Controls” and choose “Screen Recording” from the list of available ones.
  • Go back to “Mirror for LG TV” and scroll through the windows with instructions. After that, find and activate the “Notifications” option in the settings. This is to ensure that you can always see when the iPhone connects to your LG TV and when it disconnects from it.
  • After these steps, the program will automatically redirect to YouTube video hosting. You can test the screen broadcast from your iPhone to your TV by selecting any video you want to watch.
  • On the smartphone, open the “Controls”, press and hold the “Screen Recording.
  • A pop up window will appear where you can select “Mirror LG TV”.
  • Your iPhone screen content should start streaming to the TV screen. Sometimes there is a slight lag, but not more than a few seconds.
  • Connect the special adapter to your iPhone;
  • Plug the HDMI wire into the opposite connector of the adapter.
  • Plug the other end of the HDMI cable into the appropriate jack on your TV.
  • Turn on the TV.

iPhone, iPad, or iPod touch screen repeat

  • Connect your iPhone, iPad, or iPod touch to the same Wi-Fi network as your Apple TV or AirPlay 2-compatible Smart TV.
  • Open the Control Panel:
  • Press Screen Repeat.
  • Select your Apple TV or AirPlay 2 compatible Smart TV from the list.

You can wirelessly connect your iPhone to your Smart TV if your TV is AirPlay 2 compatible. To find out if your TV is compatible with AirPlay 2, contact the manufacturer of your TV (you can go to the website, call the company representatives, or just google it). Once you know they’re compatible, here’s how you’ll need to mirror your iPhone.

First, make sure your iPhone and Smart TV are connected to the same Wi-Fi network and turned on.

duplicate, iphone, screen

iPhone Screen Mirroring. The Complete (UPDATED!) Guide

On your iPhone, swipe down from the top right corner to open Control Center.

Select your TV from the list that appears. If an access code appears on your TV (this can happen especially with new users), enter the code on your iPhone to complete the connection.

When you’re done streaming your iPhone screen to the TV, all you have to do is go back through these steps and press “Stop streaming” (or something similar).