How to enter BIOS on your MSI notebook

When booting your MSI GE70 0ND-082XRU notebook hold the Delete key and enter BIOS. Main page, which shows the laptop model, motherboard, you can set the system date and time.

There is a traditional and well known method to enter BIOS (also suitable for UEFI). press Delete (for most PCs) or F2 (for most laptops) right after you turn on your computer, before the operating system boots. Typically the boot screen will show the following text at the bottom: Press the Name_keys to enter setup.

Keyboard Passion or Why I can’t enter the BIOS of my computer?

Sometimes, especially in portable electronics, the culprit unmanageability is directly a keyboard module. Make sure that none of the keys are not stuck, that is, is not in a closed (pressed) state.

Perhaps some unfortunate incident that occurred the day before comes to mind. a spilled cup of coffee, for example.

In any case you should try to connect external keyboard via USB connector.

If the prerequisites are correct, you need to replace the keyboard module. For desktops the most acceptable way to check is to connect a known good keyboard to the PS/2 socket.

To enter BIOS on MSI

The process of entering BIOS or UEFI is almost no different for MSI. After you turn on your PC or notebook the first thing you will see is the splash screen with the company logo. At this moment you need to have time to press the key for entering BIOS. The best way is to press quickly to get to the settings, but holding the key for a long time until the main BIOS menu is displayed is also effective. If you miss the moment when the PC responsive to a call BIOS, booting will go further and you will have to restart again to repeat the above steps.

The main keys to enter the BIOS are: Del (aka Delete) and F2. These values (mostly Del) apply to monoblocks and laptops of this brand, as well as to motherboards with UEFI. Less frequent is F2. The range of values here is small, so there are no non-standard keys or their combinations.

MSI motherboards can be integrated in other manufacturers’ laptops, as it is the case with HP laptops nowadays. In this case the login process usually changes to F1.

You can also view the key that is responsible for logging in via the user manual downloaded from MSI’s official website.

    Using the link above, you can get to a page with technical information and data downloads from the official MSI resource. In the pop-up window specify the model of your device. The manual selection does not always work correctly here, but if you do not experience problems with it, use this option.

On the product page, switch to the User’s Guide tab.

Find your preferred language and click the download icon next to it.

Of course, if your MSI motherboard is built into a laptop from another manufacturer, you will need to look for documentation on the website of that company. The search principle is similar and does not differ much.

Resolve BIOS/UEFI Login Problems

Sometimes it happens that you cannot enter BIOS just by pressing the right key. If there are no serious problems requiring hardware interference, but you still can not get into BIOS, it is possible that the Fast Boot option was previously enabled in its settings. The main purpose of this option is to control the startup mode of the computer, allowing the user to speed up the process manually or make it default.

Use the utility with the identical name from MSI to disable it. Besides the fast startup option switch it has a function which enters the BIOS automatically the next time the PC is switched on.

The solution is designed for motherboards, so you have to search for the model installed in your PC/laptop. MSI Fast Boot utility is not available for all motherboards of this manufacturer.

See also  How to add RAM to your laptop

Being on a hardware page go to the Utilities tab and enter the version of your operating system.

Look for Fast Boot from the list and click the download icon.

An alternative is to use the GO2BIOS button, which will cause the computer to jump into BIOS itself during the next startup. There is no need to turn off the fast startup. In short, this option is suitable for a single entry via a PC restart.

When the described instruction does not yield the desired result, the problem is most likely the result of incorrect user actions or malfunctions that have occurred for one reason or another. The most effective option would be a reset, of course, bypassing the BIOS itself. Read about them in another article.

It is useful to read information about what can cause a loss of BIOS functionality.

Well, if you are faced with the fact that it does not go further than the motherboard logo, the following material may come in handy.

Getting into BIOS/UEFI can be problematic for owners of wireless or partially disabled keyboards. There is a solution for this at the link below.

This concludes the article, if you still have trouble logging into BIOS or UEFI, write about your problem in the Комментарии и мнения владельцев, and we will try to help.

Thank the author by sharing this article on social networks.

When MSI GE70 0ND-082XRU notebook is booting, press and hold Delete key to enter BIOS. The Main page, which displays the model of the laptop, motherboard, you can set the system date and time.

The SATA Information bookmark: there are three connected SATA devices, WDC Scorpio Blue WD5000BPVT-22HXZT3 hard drive, OCZ Nocti NOC-MSATA-60G mSATA hard drive and TSSTcorp CDDVDW SN-208AB DVD burner.

System Information tab, here is the BIOS information, CPU, memory modules and their number, firmware version.

The Advanced page, here you can setup: PCI Latency Timer, enable AHCI mode, Intel SpeedStep technology (it’s power-saving technology, based on dynamically changing CPU frequency and power consumption), i-Charger S3/S4/S5 work (i-Charger is a resident Windows program, able to switch the power on your USB port, increasing its power. Connect your phone or tablet to a USB port and use i-Charger to give you a signal to start a charging circuit, making it a really neat and convenient solution to charge your mobile computing devices.).

USB Configuration tab, enabling USB 3.0, XHCI, EHCI, etc.д.

Boot page, on/off Bootup NumLock State, it is possible to disable the splash screen popup at boot Full Screen Logo Display Disabled. You can also set the boot priority for each device: SATA, PCIe card reader, USB device, or a network device connected to the Bigfoot controller.

The Security page: displaying and setting administrator and user password.

Save Exit page, here you can save your changes in BIOS or rollback to defaults.

Continue reading about using NVENC encoding on MSI GE70 notebook.

Some time ago I wrote a couple of articles about how to set BIOS to boot from USB key and UEFI boot. In the process of writing the abovementioned articles I’ve touched the subject of how to enter the Boot Menu. In fact I’ve already thought about writing something like this.к. My friends have asked me a lot of questions on this subject, but as they say, I never got around to it.

See also  How to disable fn on HP notebook

And so Boot Menu is a kind of option, which was designed to facilitate the user to perform the most common actions, without entering into BIOS or UEFI settings, as you like. Its graphical interface looks like a window with a menu of different sizes, from small words to the size of the entire screen depends on the manufacturer of the device. Boot Menu is loaded during the start or restart your computer or laptop, and to get into it should be pressing a certain key at intervals of about once a second, or two. There are also laptop models that have a specific button for this action.

How to open BIOS on PC

Press F2 or Del key to open your computer BIOS, it depends on the model. It is possible to get into this system only at the moment of switching on. a few seconds before the display of information about the OS appears a few lines at the bottom of the screen. Usually they look like this: “Press F1 to continue, DEL to enter setup”, “Press DEL to run setup”, or “Please press DEL or F2 to enter UEFI BIOS settings”.

Once you know the correct button, press it. preferably several times. The interval, during which you can call BIOS on your PC is 1-2 seconds. If the user did not have time to wait for the system to load and then reboot it.

Important! Press only one key when booting up. This will save you time as the computer does not recognise pressing more than one key at a time anyway.

There is a traditional and well known method of entering BIOS (also suitable for UEFI). press Delete key (for most PCs) or F2 (for most laptops) right after you turn on your computer, before the operating system boots. Usually on the boot screen you will see the following text at the bottom: Press the Name_keys to enter setup.

  • Connect power to the laptop.
  • Insert the installation disc into the optical drive or plug in the USB drive with Windows 10.
  • Press the power button to turn on your notebook.
  • When the MSI logo screen appears, press the Delete key until the BIOS interface is loaded.

In most BIOS to enable UEFI mode, you should find the Boot section, which will be an item Boot Mode, and in it you can switch from Legacy to UEFI.

Due to the fact that Windows 10 (like in 8) implements a fast boot mode (which is a variant of hibernation), when you turn on your computer or laptop may not see a prompt like Press Del (F2) to enter Setup, allowing you to enter BIOS by pressing Del (for PC) or F2 (for most.

There is no fundamental difference between a normal computer and a laptop. In order to open BIOS you need to use the above method.

For your convenience there is a table of popular laptops manufacturers and keys to enter BIOS:

There may be some models with different keys. Refer to the table, but if it doesn’t help, try other keys.


Sometimes it requires a special approach to enter the BIOS on laptops:

  • Some laptops don’t allow you to enter BIOS if they are running on battery. First connect it to the network.
  • Function keys F1, F2. F12 can only be activated when the FN key is pressed.

How does it look like to remove Live Update on the example of an application from Asus look at the video

In this article I tried to answer the question “what is Live Update”. As shown above, this program is a tool for some applications, allowing the latter to receive updates to their functional modules via the Internet. Usually it does not cause serious problems and in most cases the user does not notice its sporadic activity. But if you face a serious slowdown in your system and the culprit is the process I consider. then I recommend you to wait a little, in the case of prolonged lags (repeated several days or more) would be better to stop this process with the help of tips proposed above.

Using the command line, the RUN menu

None of the Ways Didn’t Work! I already have such an assumption that the bios is not on the laptop at all. All works fine, but in the BIOS does not enter any way, even by pressing the button next to the power button on the laptop.

See also  How to turn on the timer on your Samsung TV

Very good articles on BIOS, but there are questions about HP ProBook 6360b laptops.

I pressed normally, the list comes out, as in the article:

F1 System info F2 System diagnostics F7 HP spare key F9 Device boot options F10 BIOS setup F12 Network boot ENTER Continue startup

When I type something three times, I get an electronic onscreen keyboard that doesn’t look like the usual one, with an incomprehensible font. When I type something after the first time Authentication Failed, System Locked and only shut down and restart.

How to enter Boot Menu option MSI gaming notebook 2021

I searched all over Hewlett and Packard (HP) web sites in December and January and since February I’ve been scanning all the cool HP. Such wildness, as at HP did not meet any ACER, AMD, Asus, GIGABYTE, LENOVO, MSI, NVIDIA usually AMI or AWARD, and if EFI or UEFI, simple and clear, HP copyists initially, but with a full backlash, and what to do?

There was a Moscow anecdote floating around the Internet about a military man who bought a boxed Windows 8.1 Pro and failed to install on the HP laptop instead of eight.

Sorry to add a question! Two HP ProBook 6360b laptops standing next to each other on the table, both with multiboot Windows 8.1 Windows 10 x64- both of which are on new SSD drives. None of the four systems Settings firmware UEFI, on the site HP is, how to install?

Your laptop does not support UEFI, it does not work that way. (Sometimes this kind of thing happens due to quick startup enabled in the power settings. But it is not your option)

Black screen, after the inscription Asus insearch of incredible. And at the bottom of the screen asked to press Del or F2 to enter the BIOS settings. But it is useless to press anything.

It started a week ago when my Windows 10 started giving me a BIOS page when I turned on my computer. I had to exit this page without any changes. Everything stopped working one day. Replaced the batteries in the wireless keyboard, then replaced it with a wired one altogether. PC does not respond. I would be glad if you could help me figure it out.

Good time. Ahem. It’s not clear from the description, the keyboard works? This is the first thing to decide. Second: Probably faulty OS, when you get message about not found boot records, asking you to press F2 and setup BIOS. You can try to recover this way (or just put the second OS, without affecting the first one).