How to enter the BIOS in your HP Notebook

Special Cases

If the above methods do not work. it can help to find out the specifics of your notebook model.

You might be interested in: How to connect a projector to a notebook computer

The problem with entering the BIOS setup menu is often related to the type of the device, and if the options described above do not work. you should look into the characteristics of your device more deeply.

It’s easy to get an idea of the BIOS menu recall details based on the model year of your notebook.

Notebooks manufactured before 2008 Notebooks manufactured in 2008-2011 Notebooks manufactured later than 2011
F10 key Esc key followed by the F10 key Power key again, then Esc key, and then F10 key

This is what the BIOS menu looks like in older laptops.

How to. access the BIOS and UEFI settings on Windows 10 HP Laptop ( select Boot Device Priority )

enter, bios, your, notebook

Important! As a reminder the menu entry key must be pressed at a very specific moment in order to get to it in time for Windows to boot. It is desirable to press the right button over and over again until the screen displays the desired menu.

What is the BIOS

The computer needs to know what to do. How to start the operating system, how to make the motherboard work optimally, how to set the optimal speed of the coolers and so on. The chip on the motherboard is responsible for everything. And it is here that a special program is written. BIOS. Only it depends on all the low-level settings of any computer. That is why it is so important, because without BIOS notebook will not work.

A smoothly running computer doesn’t make its owner uneasy. But there are situations when you just need to reconfigure BIOS. To tweak memory operation, improve processor performance, change access passwords. So knowing how to enter BIOS is not an idle curiosity.

Consciously refuse safe booting

There is one situation that seriously complicates accessing BIOS. the UEFI menu appears instead. (This is often found in newer models like the HP Pavilion). Alternatively you could try restarting the PC again, pressing “Esc” to exit this boot mode. And then use F10.

But if UEFI is still showing up on the screen, it means that Secure Boot mode is activated and we just need to disable it using the InsydeH20 interface at our disposal:

  • In UEFI go to the “Security” section, and apply the “Disabled” option to the “Secure Boot” option.
  • Turning it off is half the battle, but we need a good alternative, and for this in the tab “Advanced” find “System Configuration” with the parameters “OS Mode Selection” or “Boot Mode”. They should be in “UEFI OS” (or “UEFI Boot”) mode.
  • It doesn’t suit us and we change it to “CSM Boot”. As variants of this wording in different versions can be “CMS OS” or “UEFI and Legacy OS”.
  • Save settings and reboot your PC.
See also  How to enable 144 Hertz on your monitor

HP BIOS settings

In the window of BIOS settings first of all we see the main menu. The partition is called Main.

Main. menu

In this section you can see the following parameters:

  • System Time. system time.
  • System Date. system date.
  • Notebook Model. name of the notebook model.
  • Product Number. number of the product.
  • System Board ID. motherboard ID.
  • Born on Date. Date of creation.
  • Processor Type. Type of processor.
  • Total Memory. the amount of RAM.
  • BIOS Version. BIOS version. How to know the BIOS version.
  • BIOS Vendor. your BIOS vendor.
  • Serial Number. serial number.
  • UUID Number. UUID identification number.
  • Product configuration ID Product configuration ID.
  • System Board CT Number. Serial number for the motherboard.
  • Factory installed OS. installed operating system.
  • Primary Battery SN. battery number.
  • WLAN FCC ID. network card/Wi-Fi ID.
  • Bluetooth FCC ID. Bluetooth ID.

There may also be information about the language, the installed disk drive and the hard drive. These subsections of the devices may have information about capacity, type, sectors, cylinders, and more.

Once again, in this article I mainly describe the parameters of the HP Pavilion 15 laptop, which may be missing many options. There is just the feeling that many of the settings have been cut out.


There are only two options, responsible for clearing or setting the administrator password and the password when you turn on and enter BIOS.

System Configuration

In this section there are basic parameters, where we set the boot priority, support for virtualization, card reader and other parameters.

  • Language. language setting.
  • Virtualization technology. enabling virtualization technology, which allows 64-bit systems and virtual machines to be installed. Intel Virtualization Technology what is it.
  • Card Reader Power Saving. enable or disable the card reader for connecting SD cards to the notebook.
  • Fan Always On. Enables or disables the notebook cooler at all times (don’t turn it off).
  • Action Keys Mode. Turn the FN key on or off on the notebook.
  • Boot Option. turn on UEFI or Legacy BIOS, and set the boot order.

Boot Option

  • POST Hotkey Delay (Sec). a delay in loading the POST procedure.
  • CD-ROM Boot. Enabling or disabling the disk drive.
  • Internal Network Adapter Boot. for devices with no memory stick, where the system boots through the terminal server.
  • Network Boot Protocol. enabling one or another type of protocol.
  • Legacy Support. Enables legacy BIOS support.
  • Secure Boot. Secure Boot (Usually prevents you from installing left-handed systems). How to disable Secure Boot.
  • Platform Key. The platform key supplied by the operating system vendor.
  • Clear All Secure Boot Keys. clear all secure boot keys.
  • Load HP Factory Defaults Keys. Load the factory defaults.


This section contains the exit options. In most cases they do not differ on

  • Exit Saving Changes. Exit from the BIOS with settings saved;
  • Exit Discarding Changes. Exit BIOS without saving settings;
  • Load Setup Defaults. Reset the settings. How to reset BIOS to factory defaults

How to enter the BIOS on your computer or laptop with and without Windows

To start the shell, you should reboot or turn on your laptop and immediately (before Windows OS startup) press the special button or key combination. What exactly what to press, depends on the specific laptop manufacturer, the model of computer equipment and publisher menu BIOS (Phoenix Technologies Limited, AMI American Megatrends Incorporated, etc.).e) There is also an Award BIOS, but this boot is much rarer.

See also  How to make two screens on your iPhone. How to change the app icons on your iPhone

Guess the button to enter the BIOS

Let’s begin. It is a good idea if you prepare your notebook and try the variants I suggest. Don’t be afraid to do it because if you get into and out of BIOS without changing anything nothing will happen to your PC.

Reboot or turn on your laptop making sure that it has power and does not go out. Once you have pressed the “On” button, watch the screen carefully. Your task is when you see the logo Compaq (red) or HP (blue) have time to press the key before the boot OS. (Don’t be surprised, Compaq is now owned and part of Hewlett Packard) And here we have a variety of options:

These are buttons for individual functions available in BIOS, but called separately: system info, diagnostics, boot device selection (F2), BIOS settings directly (F10) and system restore. This is, by the way, very convenient.

As you can see I have already mentioned the “F10” key twice and it is not by accident. On most models of Hewlett-Packard laptops this is the one to enter the BIOS. If this option did not work (and it is possible, do not worry about this) then try the following buttons: “F1”, “Delete” or “Esc” (by pressing it you can get to the menu, described in the previous paragraph).

All of them, by the way, are recommended by the official HP support site. But even if they did not help. do not despair, you may have a unique laptop model. And it necessarily has its own key for BIOS. So go through the keyboard from F1 to F12, and then do the same in combination with and “Fn” or “Shift”. There is a 99.9% chance of getting it right.

Generally speaking, entering BIOS by pressing one button is not a difficult task.

Before you update the “BIOS” on your HP laptop, you need to find the following information, which will help to identify the necessary BIOS file. You can figure out the code this way:

  • Press the F10 button (it can also be F2 or F6) at the very start of the device. This will take you to the BIOS program menu;
  • in the “Home” tab in the list of indicators find the system board code (about the fifth in the list). Write down. It will come in handy during the upgrade process;
  • To close the program use the same F10.

Guess the button to enter BIOS

Well, let’s proceed. It would be nice if you immediately prepare your laptop and try the options I offer. Do not be afraid to do it, because if you have entered and left the BIOS without changing anything, nothing will happen to your PC.

Reboot or turn on the laptop, first making sure that it has power and does not go out accidentally. Once you have pressed the “On” button keep a close eye on the screen. Your task is to see Compaq (red) or HP (blue) logo and press the key before booting the operating system. (Don’t be surprised, Compaq is now a property and part of Hewlett Packard) And here we have a variety of options:

  • The computer itself prompts you which button to press. Usually it says something like “Press F10 to run Setup” or something like that.
  • Also HP laptops may have more detailed prompts, due to a specially designed menu.
See also  How to remove open tabs on your iPhone

They will contain buttons for certain functions available in BIOS, but called separately: system info, diagnostics, boot device selection (F2), BIOS settings (F10) and system restore. This is, by the way, very handy.

As you see I have mentioned the “F10” key twice and this is no accident. On most Hewlett-Packard laptop models, this is the one for logging into the BIOS. If this variant does not work (and it is quite possible, do not worry about it), then try the following buttons: “F1”, “Delete” or “Esc” (by pressing it you can get to the menu described in the previous paragraph).

All of them, by the way, are recommended by the official HP support site. But even if they have not helped. do not despair, you may have a unique laptop model. And he certainly has his own key for BIOS. So go through your keyboard from F1 to F12 and then do the same in combination with and “Fn” or “Shift. The probability of getting to this method is 99.9%.

In general, entering BIOS with a single key is not a difficult task.

How to enter the BIOS on a laptop

For desktop computers, most often the manufacturers adhere to the traditional method to enter by pressing the. And it is not at all at will of the developer. Here we use the command that is embedded in the BIOS chip, and the programs for BIOS are written by other companies, such as Award, AMI. That’s why this question turns out to be standardized. BIOS on a laptop is usually created by the manufacturer of the computer, not the motherboard, so there may be differences.

How to enter BIOS? Now can help only or response, which will quickly press the key at the start of the computer and at the same time to get to the moment when the monitor displays a prompt to enter BIOS, or have to look for the right button by method of trial and error.

There is nothing dangerous in such a technique. Even if you start some unknown program, it is enough just to switch the notebook off and switch it on again. You should not press the whole keyboard at once.к. In this case, even if the result is achieved, you will not know which button is triggered.

You should press the following buttons: Del, F10, F11, F12, F1, F2, Esc, Tab. Most often these buttons are used, perhaps because of the extreme position of the keyboard relative to the other buttons. How. can be written on the manufacturer’s website.