How to enter the Samsung BIOS. How to enter the BIOS on a Samsung laptop?

How to start the BIOS on a notebook or PC

How to enter the BIOS. the repository of software that affects the operation of the laptop? Often when some breakdowns occur that are not related to the software, or when you connect new accessories to the device, it is necessary to test or configure the laptop, and for this you need to know how to enter the BIOS. To enter the system you need to press a certain combination on the keyboard before booting into the operating system.

BIOS is a basic input and output system that refers to the system software. Provides a set of firmware to control the laptop hardware, more precisely:

  • Checking performance of notebook hardware.
  • Management of notebook hardware through commands.
  • Participates in the loading of the operating system.
  • Provides API for working with hardware.
  • Set hard drive priority (boot).
  • To overclock graphics and CPU, RAM.
  • Set system time.
  • Disabling or enabling some hardware, such as RAM, video card, if they are installed in several, and you want to understand the cause of the ballooning error.
  • By entering the BIOS on the laptop you can adjust the battery operation.
  • Calibrate the touch-sensitive part of the notebook.
  • See all the technical information about the package.

Simply put, what is the BIOS. it is the software that implements the normal operation of the laptop based on the installed hardware, its main feature is the primary check and run the operating system. The input and output system is stored in a separate BIOS microchip of the same name that is located near the motherboard. Depending on the motherboard manufacturer, the microchip may be removable or fused to the board. After entering the BIOS. operate by pressing the following keys: DEL, F1, F2, ESC. Key F9. resets all settings to factory defaults, if you have overdone the settings. F10 button acts as an automatic saving of the entered data. The input and output system as well as other software may need to be updated, especially if you have updated the laptop hardware.

How to restore the factory settings on a Toshiba Notebook?

Press and hold down the 0 (zero) key on the keyboard while switching on your notebook. Release the “0” key when the restore message appears on the screen. Select the operating system your Toshiba laptop was running. For example, if your laptop was running Windows 7, select “Windows 7”.

To enter BIOS, press F2 or ESC and then press F2 when the Toshiba Leading Innovation logo appears on the screen during boot.

enter, samsung, bios, laptop

How to enter the BIOS for any PC: Manufacturer’s access keys

Windows or Linux may be your operating system, but no matter which platform you choose, your computer’s BIOS (basic I/O system) does everything. The BIOS, sometimes called UEFI firmware on newer computers, tells your computer what drives you have, which one to boot from, and what components you have, as well as other key functions. To change the boot order, set the system password, disable ports or integrated peripherals, or even overclock, you may need to enter the BIOS menu.

There are several different ways to access the BIOS menu on a PC:

Use the BIOS key

The first time you turn your computer on, it goes through a very quick POST (power-on self-test). If you can press the correct hotkey before the POST is complete (or hold it down while pressing the power button), you will get to the BIOS menu. However, some computers POST so quickly that they don’t recognize keyboard input in time when you press a key. For those, skip to the method below.

See also  How to send an image from your phone to your laptop

It’s a shame that different brands of PCs use different BIOS keys. Most modern motherboards use the DEL key, but laptops and desktops are less consistent. For example, pressing F2 might work on an Asus, you would need F10 on an Acer computer.

If you don’t know the hotkey for your computer, you can see if a message appears during the POST telling you which key to press, or you can try pressing one of the 12 function keys, the DEL key, the Enter key or the ESC key, since it is always one of those.You may have to try several times to determine which is which. In our study, DEL and F2 were by far the most common.

BIOS keys by manufacturers

Here is a list of common BIOS keys by manufacturer. Depending on the age of your model the key can be different.

  • ASRock: F2 or DEL
  • Asus: F2 for all PC, F2 or DEL for mainboards
  • Acer: F2 or DEL
  • Dell: F2 or F12
  • ECS: DEL
  • Gigabyte / Aorus: F2 or DEL
  • HP: F10
  • Lenovo (consumer notebooks): F2 or Fn F2
  • Lenovo (desktops): F1
  • Lenovo (ThinkPads ): Type and then F1.
  • MSI: DEL for motherboard and PC
  • Microsoft Surface Tablets: Press and hold the volume up button.
  • Origin PC: F2
  • Samsung: F2
  • Toshiba: F2
  • Zotac: DEL

Unfortunately, some computers go POST so quickly that there is no time to press the key. Some desktops won’t even recognize input from a USB keyboard until POST is complete (although they will see input from an old PS2-style keyboard).If you can’t use the BIOS key and you have Windows 10 installed, you can use “Advanced Startup” to get there.

Go to Settings.

Click on Update and Security.

enter, samsung, bios, laptop

Select Recovery from the left pane.

Click Restart Now under the Advanced Startup heading.

Click Troubleshooting.

Click Advanced Settings.

Click UEFI Firmware Settings.

Click “Reboot” to confirm.

Use the Linux command

If you’re using a modern version of Linux, such as Ubuntu, you can access the BIOS by typing “sudo systemctl reboot.-firmware” at the command prompt.

What to do if you can’t boot the operating system or press the BIOS key?

If your computer can not boot the operating system because it does not detect the boot disk, it usually stops, beeps, and gives you the opportunity to enter the BIOS, which is often called “setup”.”

However, the biggest problems occur when the system performs a POST too quickly for you to press a key, and then Windows or Linux tries to boot and fails. I had this problem when I had a missing or damaged boot loader, I got the Windows splash screen and then the blue screen of death.

To make the BIOS appear in these circumstances, you can try using an emergency boot disk, provided you can either select a bootable device at startup, or your computer has configured an external USB drive has a higher boot priority than its internal drive.

You can use the Windows 10 installation disk as an emergency boot disk. Once the USB has booted, you need to click “Restore Computer” instead of installing, and then click Troubleshoot. UEFI firmware options. Reboot.

Finally, if you can’t boot from your emergency drive, you can try to cause a system stop error, which will prevent your computer from trying to boot from its internal drives. You will then be given the opportunity to enter the BIOS menu.

Many desktops give an error message if the keyboard is not plugged in (if you need help finding one, check our list of the best gaming keyboards) or if the keyboard buffer is overloaded due to holding down too many keys at startup. Removing the main internal drive will also cause an error which will allow you to enter BIOS, but if you have an unbootable OS installed on that drive, your problems may resume once you reconnect it.

Bottom Line

Whichever method you use to access the BIOS, be careful when making changes to the settings there.You can disable key components.

How to enter the BIOS on your computer: Table

First, let’s see how to enter the BIOS on a PC. On desktop computers, unlike laptops, it is easier to enter the BIOS due to the fact that there is not the same variety of options as on laptops. The most popular way to enter BIOS is the “Del” key, on some motherboards, sometimes the “F2” key is used.

See also  HP laptop does not work keyboard and touchpad

When you see the motherboard logo, just double-click the key on your keyboard. If you did not attempt to enter BIOS successfully and Windows is restarting normally, please try again at a new system boot.

This table lists keyboard shortcuts for entering BIOS for the most popular makers of motherboards. Mainly famous companies from Taiwan.

Motherboard manufacturerBIOS versionButtons
Asus AMI Del
ASRock AMI Del
Gigabyte AMI Del
Gigabyte Award Del
MSI AMI Del
Biostar AMI Del
ESC (Elitegroup) AMI Del
Intel AMI F2
Intel Intel F2
Foxconn Phoenix-Award Del
Advantech AMI Del

How to enter Boot Menu in Lenovo laptops

For almost all Lenovo brand laptops and all Lenovo PCs you can use the F12 key to enter the Boot Menu when switching on.

You can also select additional boot options for Lenovo laptops by pressing the small arrow button next to the power button.

The next most popular laptop and notebook model in our country is Acer. To enter their Boot Menu for the different BIOS versions you have to press the F12 key while switching on.

However, there is a peculiarity of Acer laptops. often the Boot Menu with F12 doesn’t work by default and in order to make it work you need to enter BIOS by pressing F2, then reset the “F12 Boot Menu” option to Enabled, then save your settings and exit BIOS.

How to enter BIOS on your Samsung np355v5c laptop?

To enter BIOS in Samsung notebooks, np355v5c, np350e5c, np300e5x-a07ru, rv515, r525, np270e5e, n150, rc530 you should do the following: Press the power button on the laptop, then press the “Pause” button and read the text on a black background. Should be something like Please Press F2.

Go into BIOS, Boot, Boot device Priority, here should be our flash drive, set it as the first boot device, then press F10 (to save the changes) and reboot. After the reset, your notebook will boot from the USB stick.

How to enter the BIOS in a laptop Windows 10?

By default, you can enter BIOS by pressing a certain key on your keyboard (F2, Del, Assist, etc.), but in Windows 10 fast boot is enabled by default and even knowing what key to press, you can not get into BIOS at first time.

And so to start we need to enter the BIOS.

  • For this press the key “F2” when the Samsung logo appears.
  • If you have done everything correctly, we will see the following. BIOS itself.
  • Allocation of boot priorities is assigned by keys F5 (decrease) and F6 (increase).

How to enter the BIOS in Windows 10 (and older versions)

Many roads lead to the BIOS. Simply pressing a key at the right time during the boot of the system will take you into the BIOS. If you have a newer Windows computer, perhaps with a UEFI BIOS, you can enter the BIOS even easier. To save you a lot of guesswork, we’ve compiled all possible ways to enter the BIOS in Windows 10, Windows 8, and earlier versions.

How to Update UEFI BIOS in Windows

Most PC users don’t update BIOS at all.However, if you care about constant stability, you should periodically check to see if an update is available. We will show you how to safely update UEFI BIOS.

Note. Within the BIOS, you can change many basic computer settings, such as boot order, system time and date, or enabled hardware components. That’s why BIOS (Basic Input/Output System) is also known as “Setup”.

How to get into UEFI BIOS

New computers just boot too fast.So newer versions of Windows have an easier way to access the BIOS, but you need to boot into Windows first.

How to enter the BIOS in Windows 10

Go to Settings (Windows I) Update and Security Restore and under Advanced Startup click Restart Now.Note that this will actually reboot your computer.

When restarting using extended startup you can first select the boot options.On the screen that appears, go to “Troubleshooting ” “Advanced Options” “UEFI Firmware Options” and click “Reboot Now”. Which will boot directly into your UEFI BIOS from Windows 10.

See also  When opening the laptop cover, the screen does not turn on

How to enter the BIOS in Windows 8 or 8.1

We previously devoted an entire article to how to access the BIOS in Windows 8.

To summarize: open the Miracle Button Panel, for example, by pressing the Windows C key combination. Click the Settings icon and select Change PC settings in the lower-right corner.In PC settings, click the General tab and then click Restart now under Advanced Startup.

In Windows 8.1 the steps are slightly different.In PC settings, click the Update and Recovery tab. then go to Recovery and finally click Restart now under Advanced startup.

Either hold down the Shift key. While you click Reboot in the shutdown menu.

Your computer will reboot in boot modes, including UEFI BIOS.As with Windows 10, go to Troubleshooting Advanced Settings UEFI Firmware Settings and click Reboot. to boot into the BIOS.

How to access the BIOS on an old PC

If you are still using Windows 7 or an earlier version of Windows, you will have to use the traditional way to enter BIOS, t.е.е. Wait for the right moment and press the right key.

What is the right time to enter the BIOS?

The right moment. it is somewhere between turning on the computer and before starting the operating system.The window is so narrow because the BIOS essentially only initializes your hardware before passing it to the boot loader, which loads the operating system. Once the operating system starts, which is often indicated by the display of the appropriate logo, you have missed the point.

You may see a message indicating the right moment.Most likely it says something like “Press. to enter the settings,” which means that it also shows you which key to press.

In the absence of such a message, it is usually the right moment. is when you see the manufacturer logos before the operating system boots.And the easiest way not to miss the moment when you can enter the BIOS. is to press the right key even before you turn on your computer and hold it down until the BIOS appears. If this does not work, you do not press the right key or something is broken.

What is the correct key to enter setup?

As you have already gathered this depends on your hardware.In particular, it depends on the motherboard where the BIOS is located.

Common keys to enter BIOS. are F1, F2, F10, Delete, Esc as well as combinations of keys such as Ctrl Alt Esc or Ctrl Alt Delete, although they are more common on older machines.Also note that a key such as F10 may actually start something else, such as the boot menu. The exact key or key combination depends on the manufacturer and model of your computer.

You can use the trial and error method until you find the right key, press a few different keys at the same time and get lucky or browse the list below.

Acer BIOS Keys

The most common keys to enter the installer on Acer hardware are F2 and Delete.

On older computers try F1 or the key combination Ctrl Alt Esc.

If your computer is equipped with ACER BIOS, you can restore the BIOS boot settings by pressing and holding F10.If you hear two beeps, the settings are restored.

Asus BIOS Keys

As with Acer, the most common key is. F2.

Depending on your model, this could also be the Delete or Insert key. less often F10.

Dell BIOS Keys

enter, samsung, bios, laptop

On a new Dell computer try the F2 key. as long as you see the Dell logo.

Or try F1. Delete. F12 or even F3.

Older models may use Ctrl Alt Enter or Delete or Fn Esc or Fn F1.

HP BIOS keys

The keys most commonly used on HP machines to enter the setup program include F10 and Esc.