How to glue a protective glass on your iPhone


How to stick protective glass on iPhone

We tell you how to glue the protective glass on the iPhone.

Protective glass allows you to avoid chips, accidental scratches and damage to the display of your iPhone. Usually, some manufacturers provide a special frame in the kit, which actually makes it 50% easier to stick the protective accessory. But what to do when there is no such frame??

Not all users in this case can install the protective glass on the iPhone themselves. Very often the stores charge extra for this service. We decided to do a little simple step-by-step instruction on how to do it using the iPhone 12 as an example.

Before you begin: remove the remnants of the old glass, and prepare a comfortable surface for you to place your smartphone on. Remove the cover, do not use a charger.

glue, protective, glass, your, iphone

How to glue a protective glass on your phone?

The phone screen is constantly in the zone of risk, so it needs reliable protection. The best way to protect the display from mechanical damage is to stick the glass on your phone.

You can do this at home, if you take the following instructions:

  • If your smartphone has a worn protective glass, you need to remove it. Use a thin plastic object, such as a pick or a credit card. Find the least damaged edge at the glass, gently pry it off, and then slip the plastic into the resulting gap. Slowly move the improvised spatula to the center of the screen, until the accessory is completely detached from the display.
  • Clean the screen with damp and lint-free wipes, otherwise after gluing will be visible dust and lint, which is not very aesthetically.

What kinds of protective glass are there?

The technology of protective accessories do not stand still and evolve along with smartphones. Now on the market there are glasses with high-quality oleophobic coating, rounded edges, as well as frames, repeating the design of gadgets. Conventionally, all types of protection can be divided into three categories:

  • 2D. conventional glass with straight ends, which do not reach the border of the screen about 1 millimeter;
  • 2,5D. such variants have small smooth chamfers on the perimeter, which are combined with the rounding of the body;
  • 3D. special glasses with curved edges for smartphones with a screen going to the sides.
See also  How to turn on Apple Play on iPhone 11

Protective glass is glued on the front side of the gadget, in the same sequence as the film. You only need to take into account some nuances:

  • Perform all manipulations with caution
  • Strong bending can cause a crack on the glass
  • Glued glass can not smooth out, the main thing. to expel the formed air bubbles

How to properly and accurately glue protective glass on the screen of the phone, tablet without bubbles at home: instructions, photos, videos. How to remove air bubbles from under the protective glass: tips

To avoid this happening to you, as soon as you buy a new gadget, stick protective glass on it and stow the body in a stylish case. Most hardware stores will gladly help you glue your screen protector, but they will not do it for free. Do not want to overpay? Then read how to stick your own glass.

How to stick a protective glass on your iPhone

If you rarely change smartphones and try to treat your device with care, the first thing to start with after buying a new iPhone is gluing the protective glass. Nevertheless, many users doubt whether it is necessary to glue a protective glass on the iPhone.

DON’T buy a Screen Protector before watching this.

Of course, Apple is trying to use durable tempered glass. But the front panel is still the most vulnerable part of any phone. Over time, the glass scratches and abrasions appear on it. And in the case of a fall or bump, it can even break. That’s why most often we get iPhones with broken displays for repair.

But as practice shows, in most cases the protective glass protects the display when you fall down. And also 100% protection from scratches and scuffs. Therefore, we can responsibly say that it is necessary to protect the display with additional glass.

See also  How to get an iPhone under your pillow

The only important thing is to stick it correctly, so it is evenly and has no air bubbles underneath. In this procedure there is nothing complicated, so it can handle it yourself. For details on how to stick the protective glass on your iPhone see below.

Step by step instruction how to stick the glass

First remove the phone from the case and disconnect. Then the old protective coating or glass is removed from the surface.

    Degrease the screen surface with a monitor cleaner, anti-static detergent or alcohol (wipe from the kit).

Attention! Protective glass is sensitive to bending. Therefore it can not be strongly pressed when gluing, otherwise there will be a crack or even a break.

Glasses are often produced for specific smartphone models, less often. universal, designed for a particular diagonal display. But in the first and second cases, you must first make an example and determine exactly how the protective coating should be placed on the smartphone.

If the phone, which glued a protective coating, you just bought, then clean the display surface is not necessary. Simply remove the factory protective film from the screen.

Place the glass evenly

Not everyone is able to glue the glass evenly the first time. A usual scotch tape will help to place it correctly. The next step is as follows:

    Along the edge of the smartphone to the back panel adhesive tape.

Once the glass is fixed in the correct position, you can clean the display. After gluing as described above, the tape is removed.

Note! Some glasses also come with adhesive fasteners for fixing by this technology, so no scotch tape is needed.

Removing the dust particles

If there is a mote between the surfaces, an air bubble will form around it. Only smoothing it with a microfiber will not remove it. But the situation can still be rectified.

  • With a plastic card or tape glued to the coating, lift the coating up to where the dust particle is.
  • A piece of scotch tape is glued to the glass of the monitor in the area of the dust. Tape is torn off sharply.
  • Lowering the protective coating into place.

Auxiliary tool

To glue the protective glass was more comfortable, you can find on sale gel to fill air bubbles. They are often formed along the edge.

Such liquid is available in two forms. in a sachet or a dropper. The liquid is not afraid of temperature changes, so even in frost will not freeze. One sachet is enough for several applications.

See also  Samsung how to record a telephone conversation on a recorder

    Opening the dropper. Dab the liquid on the edges, where the glass recedes.

The thinner the layer of bonding gel applied, the better the result.

This is interesting! Skilful people advise to use instead of gel improvised means. for example, glycerin. Use it in the same way as the gel.

This advice seems absurd to many people. Before you glue the protective glass it is necessary to wet clean the room where the work will be done. It is necessary to remove the dust from the room. All electrical devices attract the smallest debris, and smartphones are no exception. It makes gluing the protective coating more difficult. Air bubbles form due to the settling of the smallest dust particles, invisible to the eye, lint of animals.

Before gluing safety glass do the wet cleaning of the room

If for some reasons there is no time to clean, then at least air the room. The bathroom or kitchen, where there is the least amount of dust, is the best place for pasting.

Despite the possibility of performing the previous recommendation, be sure to wipe the table on which all work will be carried out with a damp cloth. It is desirable to moisten the rag with water and detergent or antistatic. You must wash your hands with soap and water, it will not hurt to wear thin medical gloves.

Whether it is possible to glue the protective glass on the phone again

Quality surfaces for iPhone 5s and other models of the gadget can be reused. To do this, you need to carefully remove the glass and treat the adhesive side with formic alcohol. Lightly wipe it with a cloth soaked in this liquid, and allow some time to drain. Then install the protection glass according to the speaker and the button. Use light motions from the center to the edges to expel air and liquid. The small bubbles will disappear on their own after 24 hours.