How to go to BIOS on a netbook asus

Seven methods can be entered in BIOS (UEFI) on the ASUS laptop

How to enter the BIOS laptop asus? Many novice users are faced with such a question. You can do this in several ways at once. In this article we will talk about them.

If you need to access the base / output base system, the user has a short time when starting a laptop to press the correct key. This key differs in the based on the laptop and model, so the entrance to the ASUS BIOS on the ASUS motherboard is slightly different from the input in the BIOS TOSHIBA, Dell or other manufacturers.

Most often, the BIOS mode is included during Windows reinstalls. At this time, it is necessary to configure the priority of loading from the carrier flash, or the compact disk. Also in BIOS they come in to check for harmfulness or system update.

It should be noted that while the computer is turned on before loading Windows, in the corner from the bottom there is an inscription (for example, Press F2 or Del To Run Setup) with the instructions for the input to the BIOS mode.

Recommendation! If you needed to load a laptop from a carrier flash, there is no need to enter the BIOS mode. It is enough to call Boot Menu. After starting the laptop, immediately press the ESC button, where in the download menu you can select the right boot device.

On ASUS laptops with Windows 7 and below

On the ASUS laptops with the Windows 7 operating system and there is no support for fast loading. Therefore, the entrance to the BIOS is carried out by standard means. To enter the BIOS, follow the following sequence of actions:

  • Turn off the computer completely
  • Press and hold the “F2” button.
  • Press the Power button (do not let go “F2”).
  • In the BIOS on the Boot tab, change the procedure for downloading devices (if necessary).
  • Save key changes “F10”.

Note: For normal initialization of the device in BIOS, it is necessary that it be connected to the computer before it is turned on. This applies to hard drives and loading flash drives.

Or use this way to enter the BIOS:

  • Turn off the computer again. Hold the Power button for 5-10 seconds.
  • Press and hold the ESC key.
  • Press the Power key (do not release “ESC”).
  • In the download menu, select “Enter Setup”.
  • Set up the BIOS and save the changes “F10”.

Note: If access to BIOS is required only to change the procedure for downloading connected devices, use a more convenient way:

  • Disconnect the computer long holding the Power button.
  • Insert a loading flash drive or a disc into a laptop.
  • Squeeze and do not release the ESC key.
  • Click on the “Power” button once.
  • In the Boot Man, the desired device.

How to go to BIOS on the ASUS Windows 8 laptop

It is necessary to configure the subsequent inclusion in the BIOS system through the change in the computer parameters. To do this, go to the menu item of general settings to special loading parameters. Here you need to indicate in the requirement of rebooting that you need a diagnosis of the device. Next, in the “Diagnostics” item in additional parameters, find the parameters built.In according to UEFI.

Next, restart your ASUS laptop and the next inclusion will be in BIOS mode. If you need to load from a USB drive or from a disk, then you must install them in advance.

How to open BIOS on an asus laptop

Users rarely have to work with BIOS, as this is usually required to reinstall the OS or the use of expanded computer settings. On ASUS laptops, the entrance may vary and depends on the device model

The basic input system of the output, BIOS is called, by the fact that it is responsible for the work of such computer inteys, thanks to which information is possible to enter the computer and withdrawal. Modern BIOS versions from Award, Phoenix and AMI make it possible to use the capabilities of network cards, IEEE1394 and USB devices, including for loading the operating system. Graphic settings menu, which is otherwise called BIOS SETUP.

Users can add both a password to start a computer and a password for entering BIOS Setup. There is an opportunity to indicate the device with which further download of the computer will be made. Fans of disclosing the potential of their computer will like the possibility of accelerating the processor and RAM. He feeds, as in the case of a motherboard from the attached battery.

During the start of the computer, the BIOS chip is addressed to receive instructions for further actions. This is self.Test after the power is turned on. Post. After positive testing, the main components without which work on the computer is not possible (input and output devices, RAM, ROM, etc.D.).

The main function of the BIOS is the timely identification and recognition of all the components of the system:

bios, netbook, asus
  • Random access memory;
  • Video cards;
  • Processor;
  • Devices inside the laptop;
  • And external connected accessories (flash drive, disk).

How to go to BIOS on ASUS

Asus. Taiwanese manufacturer of computer equipment, components and laptops. At least a quarter of all computers in the world are collected on the basis of the motherboard of this company. This manufacturer equips its boards with different versions of BIOS. Therefore, there are several ways to go to BIOS on ASUS.

The easiest case is when you need to go to the BIOS of a personal computer. Turn on the computer and press the DEL button several times as soon as the screen lights up. On modern ASUS motherboards, the most frequently used entry key to system settings is Del.

If the computer has been turned on, restart it. Also click the reboot button if you have already seen Windows logo. Sometimes the computer loads so quickly that it becomes difficult to catch the right moment and enter the BIOS. Keep in mind that BIOS is the basic system introduce and output of data. That is, when you click the power button, the component survey immediately begins and their work on loading the operating system.

To go out in the BIOS on an ASUS or netbook, press the F2 key after turning on the power. These BIOS devices are usually more difficult and can be loaded even faster than in a conventional PC. The micro.Program of the portable computer often contains advanced safety settings, traffic jam control, that is, the mouse substitute, as well as an additional operating system with “instant loading”. The vast majority of models known for today use F2 to access the computer system settings.

In very rare cases, the combination of keys is used. If you could not go to BIOS by pressing F2, most likely you have just such a case. Then immediately after turning on, press the Ctrl button and, without releasing it, press F2 several times. Remember that the screen with a sentence press the button and enter the BIOS can flash very quickly, so try to press the key several times when you start a computer or laptop.

If you have a new laptop or a computer, and you have not yet installed the operating system, but you can’t go to BIOS by pressing Del, F2 or CTRLF2, then the keyboard replacement can help. Connect the external keyboard and again try the above options.

How to go to BIOS when you turn on the laptop

Depending on the manufacturer, year of release and a series of laptop, you can enter BIOS in different ways. Various keys or even combinations are used, and messages on the screen indicating the necessary may not be.

It is better to check only one of the possible options at a time. If it is not suitable, wait for Windows launch, reboot PC and try another key or combination. Checking several options at once is not worth it, since you can simply not get into the desired period of time.

ASUS laptops

Most often, a F2 key is used to go to BIOS during the inclusion of the laptop. Less common options. DEL and F9.

How to Update Notebook BIOS in Windows? | ASUS SUPPORT

If this does not work, turn off the laptop, click the ESC, and then click the power button. Do not release ESC until the Boot menu appears on the screen. In it you need to go to Enter Setup and press Enter.

Acer laptops

Acer laptops most often use F1 and F2 keys, as well as CTRLLTESC combination. Acer Aspire may require ctrlf2. In the TravelMate and Extensa line to enter BIOS, you usually need to click F2 or Del. In old Acer laptop models, CtrLaltDel and CtrLaltESC combinations may occur.

Lenovo laptops

To enter the BIOS on Lenovo laptops, the F2 key is most often required. On many ultrabooks and hybrid laptops, a number of F-clavish can only be activated using FN, which means that FNF2 will need to be pressed. The F8 and Del keys are much less common.

On many laptops of the company on the side panel or next to the power button there is a special key for entering BIOS. You can press it only when the laptop is turned off.

HP laptops

To go to BIOS on HP laptops, you usually need to press the F10 or ESC key. But on old models, Del, F1, F11 or F8 may be required.

bios, netbook, asus

Samsung laptops

In Samsung devices, most often for entering the BIOS you need to click F2, F8, F12 or Del. In case of access to the FN, only through the FN button will require the corresponding combination: FNF2, FNF8 or FNF12.

Sony laptops

VAIO series models can have a special Assist button. If you press it while loading a laptop, there will be a menu with the possibility of choosing Start Bios Setup.

In obsolete laptops, F1, F2, F3 and DEL keys can be used.

bios, netbook, asus

Dell laptops

In the case of Dell laptops, the most common transition in BIOS is F2 key. F1, F10, Del, ESC and Insert are a little less common.

How to go to BIOS on an asus laptop

It is worth noting right away that the presented method may not work if you are the Windows 10 or 8 user. Then I will even tell you why exactly, and how it is possible to fix it.

Perform the following: turn off your laptop, click and hold the F2 button, then re.Turn on the gadget.

When the BIOS is open, the button can be released.

Stages of loading can be changed using the Boot tab. To do this, it is enough only to put the CD, DVD or flash drive in place of the first device, which should already be connected. In my case, the first place belongs to the SSD drive.

BIOS & Boot menu setup on ASUS X45C Laptop

Do not forget about maintaining the settings by clicking on the key F10. After Windows is installed or certain actions will be performed, it is better to assign a hard drive again or SSD first place in the list of devices.

We set up the BIOS asus

Almost every computer user has come across an abbreviation BIOS. Translated from English, it means “basic input/output system”. BIOS is a kind of “layer” between the system programs and the “iron” PC. In order for the interaction between them to occur without failures it is important to set the right settings for BIOS.

To enter the BIOS during the launch of the system, after the inscription on the load on the screen, press the F2 key several times. You will get into the window where you can set any settings for BIOS. Some modifications of the motherboard are adapted for the Del key, the correct combination is indicated at the bottom of the monitor.

Several parameters of the basic input and output system make it possible to accelerate the process of initializing such a device as ASUS laptop. At the same time, the entrance to the BIOS, as was noted earlier, will have to be done several times. Immediately you need to establish the procedure for choosing a loading device. To do this, go to the Boot menu section. In it, it is necessary to install exactly that hard drive as a first boot (the PGDN and PGUP or F5 and F6 keys are used, on the right there is a clue on how to perform this manipulation) on which the operating system is physically located. The same parameter is sent before its installation either to a flash drive, or on a CD (depending on where this procedure will be performed from where). The following boot sources (Second Boot, Third Boot) should be Disabled to exclude misunderstandings. Similarly, it is recommended to install Other Boot. Next, you need to turn off the output of the logo of the manufacturer of the mobile PC. It may be hidden by important messages about the state of computer equipment at the test stage. To do this, go to the Advanced section and find the Logo On. Also, according to the previously presented methodology, we change it to Disabled. Then we keep the changes and reboot the laptop. The BIOS load on the ASUS laptop after that will be visible firsthand, and not hidden behind the manufacturer’s logo.

To do this, press the power button and, before displaying the ASUS logo or downloading Window, immediately begin to press the F2 or Delet key or “.

If everything is done correctly, we will see BIOS, as in the photo.

There is a brief description of the laptop, but we are not interested. Now the most interesting will begin.

We go to the Security tab.

We go down to Secure Boot Menu and go into this option. We see there.

And here we turn off the Secure Boot Control, that is, rearrange from Enabled to Disabled.

Then we return to the initial menu, that is, to the Security tab, through the ESC key.

And go to the Boot tab.

And here we turn on the option “Launch CSM”. We do as in the photo.

After the choice, a warning window will appear, which briefly speaking means “that the settings, or the option is active, it will take a reboot.””

Well, keep the settings and reboot the laptop. Click “F10” and select “Y (YES)”, click “Enter” and the ASUS X751LA laptop is rebooted.

Again we enter the BIOS and go to the Boot tab, we should see a new option there.

Here we put the priority of loading from the devices, in this example I put my USB flash drive, you can also put the drive for loading.