How to Insert a Button on an Asus Laptop

How to unlock the keyboard on your Asus laptop?

Turn off the laptop, remove the battery and disconnect the power cord. Then press the power button several times, then plug all the above components back in. Try turning the notebook back on. If you get water in the keyboard the problem might be serious.

In most cases on Asus laptops, the function keys are turned on and off by using the following combinations:

How to turn on the volume buttons on your Asus laptop?

To turn on the sound on Asus laptops, you must simultaneously press the Fn and F10 buttons on the keyboard. Note: on other brands of laptops the initial combinations may be different. Universal rule is one. the user needs to press the Fn button and the F key, marked with a crossed out speaker.

If you mean the “function” keys which are activated by pressing the Fn key, then you can disable the Fn key: Press the Fn NumLk(NumLock) key combination simultaneously.

How to stop the Fn key from being pressed?

This way you can use the Num Lock key to disable Fn. Press the NumLock key. When you hold down the Fn key. The Fn key will be disabled. On some keyboards the Num Lock key looks like Num

Usually to extend the functionality, laptop keyboards have a special Fn-key.As it turned out in BIOS was an option Action Keys Mode (in Lenovo laptops. HotKey Mode), which default value was Enable, and as a consequence the function keys work without pressing Fn.

How do I turn off the Fn button??

To enable the FN lock on the All in One Media Keyboard, press the FN and CAPS LOCK keys simultaneously. To disable the FN lock, press the FN and CAPS LOCK keys again simultaneously.

Press the f10 key to open the BIOS setup menu. Click the Advanced menu. Select System Options. Select or clear the Launch Hotkeys without Fn Keypress check box.

How to enable the Fn button on an HP Notebook?

Press the fn key and the left shift key at the same time to enable the fn (function) key mode. When the fn light is on, press the fn key and the function key simultaneously to activate the default action.

You must go into the BIOS to override this feature. Often the ESC key has a “function lock” icon that looks like a padlock. Press the “FN” and ESC selection key and the function keys will switch to the function keys.

How to change the settings in the bios on your notebook?

On most PC/laptop models you need to press F2 or Del (sometimes F1 or Esc) key to enter BIOS right after turning the device on. Some laptops (e.g. Lenovo) have a special Recovery button (pressed instead of the power button).

Enter the BIOS from the command line using the shutdown /r /o /t 0 command. The /o switch will load the diagnostic menu of the operating system. The Shift key combination Restart. Press the “Start” button, then “Shut Down”, hold down the Shift key on your keyboard and select “Restart.

How to adjust the brightness or contrast on my laptop?

If you’re having trouble adjusting the brightness or contrast of your laptop display, keep in mind that every laptop model (and every operating system) is slightly different. Below are some common ways to adjust brightness and contrast on a laptop computer.

Some of the options on this page are also useful for adjusting the brightness or contrast on a desktop computer.

button, asus, laptop

Adjusting brightness with laptop keys

On most laptops, you can adjust the brightness of the display using the special keys on the keyboard. The keys are usually marked with a brightness symbol

Brightness keys are often function keys that have a special function if you press them while holding down the Fn key.

The Fn key is usually to the left of the space bar. Brightness function keys may be located at the top of the keyboard or on the arrow keys.

For example, on the Dell XPS laptop keyboard (pictured below), hold down the Fn key and press F11 or F12. to adjust the brightness of the screen.

Other laptops have keys that are fully dedicated to adjusting brightness. The HP Chromebook keyboard (pictured below) doesn’t have an Fn key. Press the brightness keys.


To change the brightness on the Chromebook, you need to press one of the two adjustment keys.The small gear lowers the brightness and the large gear increases the brightness. These are located at the top of the keyboard, as you can see in the red rectangle below.

Adjusting the brightness in the operating system

You can also adjust screen brightness using software controls in the operating system:

button, asus, laptop

Windows 10

Windows 10 has several ways to adjust display brightness.

Using the battery icon on the taskbar

  • Click the battery icon on the taskbar.
  • In the power status window, click the brightness tile. Each time you click a tile, your brightness will be adjusted by 25%.

Using the Windows Mobility Center

  • Open the task menu by right-clicking the Start menu icon or by pressing the Windows X key.
  • Click Mobility Center (or press B ).
  • In the Mobility Center, adjust the brightness slider.

Adjusting brightness in Windows 8

  • Open the Charms panel.
  • Select the Settings miracle button.
  • Select the brightness icon.
  • Move the slider up and down with your mouse or by pressing the up and down arrow keys on your keyboard.

Brightness adjustment in Windows 7

  • Open the control panel.
  • Select Hardware and Sound.
  • Select Power.
  • Use your mouse to move the brightness slider to the bottom of the window.

Brightness adjustment in macOS

  • Use the brightness slider to adjust the brightness.If you want the brightness to change automatically according to the ambient light around your computer, check the Automatically adjust brightness checkbox.

Adjusting brightness in Linux

Many window managers on Linux offer brightness adjustments in the settings panel. For example, on Ubuntu systems with the Unity window manager:

button, asus, laptop
  • Click on the icon to the right of the menu bar.
  • Select System Settings.
  • Select Brightness and lock.
  • Adjust the brightness slider.

If your laptop uses Intel or NVidia graphics, you can also use a handy command line tool called xbacklight. This can be set by most package managers. For instance on Ubuntu or Debian systems:

To use xbacklight, specify the.set parameter as a percentage. where as a percentage. is a number from 0 to 100.For example, to set the brightness to half:

You can also increase or decrease the brightness as a percentage. To increase the brightness by 10%:

Contrast Adjustment

Most laptops do not have hardware contrast controls, but you can configure your operating system to use a high-contrast display mode.

Adjusting contrast in Windows 10

  • Hold down the Shift and Alt keys on the left side of the keyboard and press the Print Screen key.
  • When asked if you want to enable high contrast mode, click Yes.

To return to normal contrast mode, repeat step 1, and high contrast mode will be overridden.

If pressing a key combination does not prompt for high contrast, you can turn it on in the “Easy Access” menu:

  • Open the Control Panel.
  • Click Easy Access.
  • Select Special Features Center.
  • Select Make your computer more visible.
  • Make sure Enable or Disable High Contrast when set.
  • Click OK.

Adjusting Contrast in Windows 8

  • Open the Charms panel.
  • Click Settings.
  • Select Easy Access.
  • Under High Contrast, click a button to turn high contrast mode on or off.

Adjusting Contrast in Windows 7

  • Open the Control Panel.
  • Enter a window color in the search bar.
  • Click Change window color and indicators.
  • Under Basic and High Contrast Themes, select High Contrast Theme.

Adjusting contrast in macOS

  • From the Apple menu, choose System Preferences.
  • Click Special Features.
  • Check the Increase Contrast checkbox and use the Display Contrast slider. to customize the display.

Contrast adjustment in Linux

There are command line tools to adjust screen contrast, such as xgamma and xcalib. They can be used to fine tune any screen contrast reduction by default.

How to make the f1 f12 keys work on your laptop?

To fix this little problem you need to press the Fn Lock button if you have one. In addition, go into the BIOS and find there on the Configuration tab the option Hotkey Mode and turn it on, or vice versa turn it off. Do you need drivers for the Fn-key?? No, we don’t.