How to install a printer on a computer without a disk

How to install a printer without a installation disk: step.By.Step instructions for beginners

For modern equipment, install a printer without an installation disk is a simpler task than for obsolete. There are two main ways to solve it in the Windows operating system. The first is to automatically download the files necessary for the operation of the Windows system utilities through the system utilities. The second method will require more user participation, since files must be downloaded from the site of the device manufacturer, and then install it yourself.

How to install a printer without CD Driver (Installer)/CD Reader? With English Subtitle

Before installing equipment in the system, you need to correctly connect it to the computer. In new printers, USB, Ethernet or wireless connection through Wi-Fi are used for this purpose. Difficulties may arise with the connection of old devices, since on the motherboards of modern computers there are not always the required connectors. For connection through outdated LPT or COM ports, special adapters are used on USB.

Note! Instructions for quick connection are often included in the printer supply kit. It can be printed at the beginning of the main management of the user or made in the form of a separate liner.

Connection procedure via USB

Many users have a solution to the issue of how to connect a printer to a computer does not cause much difficulties. The procedure is quite simple and for all printer models it will be approximately identical.

Connecting the printer by cable

Connection is carried out in this order:

  • A USB cable is taken, which is inserted into a working port on a computer or laptop.
  • The other end of the cable should be inserted into the appropriate connector in the printer.
  • The second wire is inserted into the outlet.
  • Next, you should turn on the printer using the start button, which can be on both the front and the rear panel.

You can connect the printed device not only through the cable, but also by Wi-Fi connection. This option is the most convenient when using laptops. However, it should be borne in mind that in this case, the device will still need to be connected to another PC on the cord.

Note! After the connection of the two devices is completed, it is recommended to look at the PC or laptop monitor. If everything is done correctly, a message should appear in the lower right corner that new equipment has been found.

Connection via cable

Installation of drivers

As already mentioned, if there is an Internet connection of the driver, can be installed automatically (Windows system is quite smart). Another option, if the device is new, then the installation disk with all the necessary applications is included with it. How to work with him:

  • Check the availability of a printer connection to a computer and a network.
  • Insert a disk into a disc.
  • Open the “My Computer” section on the laptop.
  • In a pop.Up window, you should twice click on the image of a drive.
  • Either the program will start, or the disc itself will open. In the latter case, in the presented list, you need to select the installation file. It is usually indicated by the word “setup”.
  • Wait until the installation is completed.

Print setting

After all previous procedures are successfully completed, it is recommended to move on to the settings. A detailed description of how to configure the device:

  • Select the “Start” menu.
  • Further section with devices.
  • In the presented list, find the installed device.
  • Click on the image of the right key.
  • Select “Print Settings”.
  • A menu will appear in which the user can edit the settings, for example, set the brightness of the displayed images and texts at his discretion.

There are a lot of options for how exactly you can change the settings. Here is a list of recommended:

  • Change of page orientation. You can put a book or album version.
  • Change the size of the output sheets. Standard A4.
  • Set alternating, printing text on both sides.

Trinous printing

To make sure that the device works correctly using the “trial print” function. How this procedure is performed:

  • Through the “Start” menu, you need to open the section “Devices and printers”.
  • Select the installed and press it with the right button.
  • Function “Properties”.
  • In the “General” section in the lower part of the screen there is a “trial print” button.
  • It is necessary to click on it and the printed device will work, releasing the page.

Printer connection via Wi-Fi

This is the easiest way to connect, but it has a significant drawback. If you do not turn off the printer after work, another person can enter the system and print unnecessary documents, spending ink and paper and paper. Worse, if this is your neighbor decided to print a few offensive words addressed to you. If you are not ready to endure the possibility of such a result, you need to connect the printer by entering the SSID password. To do this, your printer should have a LCD display.

In order for this problem to never bother you and drivers for any external devices are installed automatically, just change the basic Windows settings. Because of this:

Again go to the “Devices and Printers” menu (we told you how to enter above) through the control panel. Click the “Computer” icon with the right mouse button and in the context menu that appears, select “Installation Parameters”;

The dialog box will open, in which you need to select “Yes (recommended)” (recommended default settings) and click “Save”;

Now, after connecting a new device, Windows will automatically find and install the necessary drivers from its database or via an Internet connection.


Official sites

If you do not have a drive with printer drivers, then you can download them from the official site of the manufacturer. To do this, just know the company and the printer model. You can find them in the documentation, on the case or rear of the device. If you do not deal with the instructions below, you can download the desired driver on our website without any fears (all drivers without viruses).

Open any browser and enter in the search bar: “Printer HP Laserjet P1102 Drivers download». In this article I will look for a driver for the aforementioned device, you need to indicate your model.

As a rule, a link to the official website of the developer will be on the first search page, in the very top. But it does not always happen and therefore you have to be careful. In order not to download malicious software instead of drivers, make sure that you really went to the official website of the developer. To do this, pay attention to the site link in the search engine. There should be nothing “superfluous” (the address will be something like this: “HP.Com “or” Samsung.Com “and T.D.

If you doubt the authenticity of the site you find, you can only enter the name of the printer company without a model and other information. And from the main page go to the section “Drivers and other software”.

Advantages of downloading drivers from the official site:

As soon as you fall on the desired page (“drivers and other files”, “software”, “software”, “download”, as well as “Drivers” on the English.Language version of the site), you will have to enter the model of your printer and search.

In addition, some sites allow in automatic mode to determine the device model and the necessary drivers, for example, there may be the “Determine the Product” button. So, if we are on the HP website, we click the “product search” and in our case, varieties of this model appear. We need to choose the right model by pressing the left mouse button.

After the necessary drivers are found, it will be necessary to indicate information about the version of your operating system, the discharge of the system. If this window does not appear, then just click on a link or button for downloading drivers.

Read How to install Apple ID through a computer

There may be such a situation that the site will offer to download the version of the drivers to choose from:

You do not need to worry what version you download, the main thing is to indicate the correctness of your system (discussed above).

The loading of the installation package of drivers will begin:

At the end of the load, you need to start a downloaded file and follow the instructions of the installation wizard.

Installation of the driver manually

The procedure for installing the driver manually will consider the example of the printer Epson Stylus Photo P50. To solve this problem, you must go to the official website of the manufacturer of the equipment. In this case, this is Epson. This can be done using any search engine. Squealing address. Http: // www.Epson.Ru/.

Next, you need to go to the section “Drivers and Support” and select the printer of interest to us from the drop.Down list or enter its name into the corresponding line.

After that, press the “Search” button. In the next window from the drop.Down list, select the operating system installed on the computer and click the “Download” button.

Next, you should unveilize the downloaded program and start it. After that, you can connect the printer and start working.

Thus, the absence of the installation disk is not at all an insurmountable obstacle for the successful use of the printing device. Both of the presented methods with the correct execution of the above actions allow you to find and install the required driver for the printer.

Windows update

Windows updates can also help install drivers on the printer when the disk is not available. Modern operating systems of the Windows family, such as Windows 7.8.10, have a “sewn” basis with drivers not only for printing devices, but also for other equipment.

If you have a model of the device is new or not very popular, perhaps there are no drivers in the Windows database. In this case, it is necessary to carry out a forced update through the Windows Update Service. How to do it quickly and easy, look in the instructions below.

Action procedure for Win10. Click to see.

Open the control panel for your personal computer. Regardless of the device, everything is the same for both if Windows 10 is installed. Click the “Start” button with the right mouse button and select “Perform” from the opening menu “.

In the window opened, type “Control”.

In the control panel, open the “Devices and Printers” section.

Find your computer among devices.

Open the menu by pressing the right mouse button and select the Windows Update Center.

Click “Check the availability of updates”. If the system finds any update packages, install them.

install, printer, computer, disk

Instructions for Win7. Click to see.

Action on updating through the “Update” service for the seven.

install, printer, computer, disk

Click “Start” and enter “update” in the search line. Select “Check updates”.

Check the availability of updates and install all found.

After rebooting the Windows computer should “see” a new device and install recently loaded drivers. If this does not happen, perhaps there is no driver in the Microsoft database. It is recommended to use other methods of connection. You can find them below on the page.

The second method

If you decide to use the manual method to solve the problem of installing and setting up the printer without a special installation disk, first open any web browser. Enter the following request in the search field: Download the Driver “Your Printer Model”. In most cases, one of the first places of release will be a link to the official website of the manufacturer of office equipment or, more precisely, to the equipment support page.

It is better to download the driver from our site (go to the download section) or from the official site of the manufacturer, because we do not have malicious code and the latest versions are always loaded. After downloading the file, it remains only to start it and wait for the file unpacking. After that, a master of installation of this software will open, in which you need to click on the button confirming the start of the driver’s installation. So you just need to follow all the instructions that will appear in the process. In the end, you can start setting up printing equipment for which you have just installed the latest version of the software.

Update centre

You can try to install the printer through the Windows Update Center. There is nothing complicated here:

After installation, you have an icon of added equipment in your section “Devices and printers”. Click on it with the right button and select “Delete”. Then connect the printer and wait until it “grabs” the previously installed software.

Carry out repair or firmware of your printer in g. Simferopol you can in the service center on the street. Starozenitny, d.9 (entrance by the fence). Please contact working hours from 9.00-18.00 by number 7978 797 68 58