Pencil for the phone with their own hands: How to make a stylus with their own hands
When creating a stylus using conductive silicone compound that can be used with iPods / iPhones / iPads and other smartphones with capacitive screens. Since the contacting part of the stylus is transparent, you can see the lines you draw and draw them more accurately. What to make a stylus for your smartphone
The instructions tell you how to make a stylus for a tablet with their own hands:
- Proofread any pencil or pen and turn it into a standard stylus for pressing buttons, drawing sketches, while you can use the pen / pencil and for the usual purpose. for writing on paper
- Use conductive rubber to create a stylus with a round tip for drawing and clicking
- Use conductive rubber to create a flat brush to draw and use in graphic editors. A brush like this could fit in a wallet (shown in the title picture)
Paper curled in a tube with the tip soaked in water. can be used as a stylus.
A cotton swab with foil
Ear stick wrapped in foil can be used as a stylus.
To use a battery (either finger or little finger) it is important to know the main secret. touch it with the blunt side “-“, evenly pressing it to the screen.
If you have a battery handy, you can use it. The battery can be taken out of, for example, the TV remote control. Work with one side of the battery. The method works, tested, but there is an opinion that the battery can have a detrimental effect on the screen of the device. Also uncomfortable to use, scratching the screen.
If you know other guides that can be used as a substitute for fingers or stylus, tell us about it in the Комментарии и мнения владельцев.
P.S. To avoid problems, we strongly recommend using a stylus, rather than a handy substitute.
Tweezers can be used as a stylus when working with diamond embroidery. At home this is the easiest replacement, if there is no time to go buy a new tool. Many needlewomen say they find it even easier to work with tweezers.
Others prefer the stylus, because with it the work on the embroidery becomes much faster. Here everything is individual, but it’s worth knowing about this alternative replacement.
How to make a stylus for your phone with your own hands for a capacitive display
Once the type of screen has been determined, you can begin to create a stylus. Usually the items that you may need in its manufacture, there are in almost every home. You can also specifically buy things like a pencil, sponge, or other item.
There are several options for creating an appropriate stylus for the display. Keep in mind that the capacitive screen needs conductive material. It is also recommended to test the stylus on a screen with a film. This will protect the screen from damage if the material for the stylus was chosen poorly.
The stylus can be made from an ordinary dishwashing sponge. You will also need a ballpoint pen with a detachable tip and removable stem, and scissors. The following instructions can be followed when making a stylus:
Now you can test the work of a homemade stylus. Your fingers should rest on the part of the pen that is in contact with the sponge. If your fingers touch another part of the stylus, the current will not flow through the sponge and the screen will not work.
This is not the most reliable stylus. Its main disadvantage is the low accuracy due to the large tip. However, it is easy to make and can help in case of emergency.
Stylus for the capacitive screen can also be made of foil. First, you need to prepare the materials. You will need about 30 cm of aluminum foil, duct tape and a pencil with unsharpened rod.
To make a tip out of foil you need:
Now the stylus is ready. It is more accurate than the previous option and is suitable for creating drawings on a smartphone. If the stylus does not work well, it is recommended to flatten the tip of the foil more. However you should not make it too thin, otherwise the screen will not recognize the pressure.
Some people use a pen or chopstick instead of a pencil. You can choose any option that will be optimal for the phone and its owner. If there are other tubes or wooden products of elongated shape, you can use them, there are no restrictions here.
A cotton swab
The easiest, but effective method is to create a stylus from a simple cotton swab. Just like in the last variant you will need a foil. You just need to wrap the rod with foil and then wet the tip of the homemade stylus. The absorbent cotton soaked in water will become a conductor of current.
This stylus can be slightly improved by increasing its length. It will be necessary to prepare scissors and a pen, whose rod can be removed from the tube. The algorithm is as follows:
- the stick is pulled out of the pen and one end of the cotton swab is cut off;
- The cut end of the stick is placed in a pen, the tip with the remaining absorbent cotton on it should stick out like a rod;
- now the object should be wrapped in several layers of foil, remember that the tip of the stylus is not wrapped;
- The tip of the cotton swab is moistened in warm water.
When using this type of stylus is required to touch the foil fingers, otherwise there will be no reaction to touch.
It is necessary to periodically moisten the tip of the cotton swab in the foil if the screen does not respond to touch. This is one of the easiest and most convenient styluses, however, it is necessary to have water nearby. It can be carried around in a small container.
What phone is better to buy
Presented rating smartphones, which are equipped with a stylus revealed that these devices, although not much in the market, but still there is a lot to choose from. To choose the right smartphone with such technology it is necessary to be guided only by the budget and requirements. If the budget is the minimum, then the choice naturally falls on the device from Smartisan. If the budget reaches the average price among these smartphones, the right choice will be LG or the famous Note line from Samsung.
The top smartphone from Samsung, one of the company’s flagships.
The stylus here is not simple, but its own battery. it charges while it is inside the smartphone. There is a protection. you can not insert the stylus into the body the wrong side. The pen has a new functionality. you can use it to control your smartphone as a remote control, for example, remotely switching slides. In short, with each new generation of stylus is getting better and better.
As for the smartphone, then there’s not much to tell. the very, very flagship with almost the best display and camera on the market, a chic design, support for fast and wireless charging, iris scanner, a powerful battery, etc.д.
- Screen diagonal: 6.4 inches
- Screen resolution: 2960×1440
- Weight: 201 g
- Number of SIM cards: 2
- Processor: Exynos 9810
- Memory capacity: 128 GB
- RAM capacity: 6GB
- Battery capacity: 4000 mAh
- Back Camera: Dual 12/12 MP
- Front Camera: 8 MP
- Support for memory cards: yes
Stylus with his hands
Hello to all the do-it-yourselfers. Today I will show and tell you how I made a stylus for your smartphone. This home-made device will be useful for artists, designers, etc. If you do not have a factory version, this self-made will be a great solution. There are a lot of self-made ones like this on the internet, but they are incomplete. Some use wet absorbent cotton, others foil, etc., but the principle is the same. You have to use a conductor that makes contact with your hand. Body electricity is transmitted by the conductor and the conductor in contact with the screen produces pressure, movement, etc. But they have little or no effect on your smartphone. And on the tablet, there is no reaction at all.
I am certainly not an artist, but I sometimes like to draw. Well, I forgot my stylus on the train, I was too lazy to go to the store (far away), there was nothing to do and I decided to make a stylus with my own hands. An idea came to mind, what if instead of touching the conductor, connect a power source. The current will be stronger there, maybe it will work better. Well, let’s get started.
To make this home-made device we will need
Foil2. Pen3. Lighter with a flashlight. You need batteries, but you can use thumb batteries. 4. Scotch tape, duct tape
Connecting foil and batteries
We unscrew the screw and carefully pull the batteries out of the lighter body. Now we cut the foil into two parts and wrap both parts in a thin strip. Put one strip of tape on the minus side of the battery. Wrap the other strip around the contact and connect it to the plus side. Wrap the batteries and the strips with scotch tape.
Inserting everything into the pen body. On a cotton swab we wrap a little bit of absorbent cotton. Then wrap the foil over it. Connect the strips with the foil and Insert the cotton swab into the case and fix it with a piece of tape.
This is how we managed to make a stylus using simple materials. The stylus works perfectly, I did not expect it myself. I did not wrap anything around the end of the stylus. I checked it out by forcefully drawing it without any scratches. But if you are afraid to damage the glass or the armor. Then screw a thin layer of scotch tape on the stylus. But then the stylus will not work very well, it will work in some places. If you don’t have foil, you can use any other conductor. For example you can use copper wire or aluminum wire. Well, at least in the internet there are such self-made. I did not make them myself, so I can not say for sure. There were even options with graphite, magnet, etc. Well all, if you liked samodelika put likes. Delivery of new handmade articles to the post
Receive on mail a selection of new handmade articles. No spam, only useful ideas!
Filling the form you agree to the processing of personal data
Become an author of the site, post your own articles, descriptions of selfmade with payment per text. here.
How to make a thin stylus for a capacitive screen?
Stylus. pen (small metal or plastic wand) with a special silicone tip, which should touch the touch-sensitive surface of the monitor to control your computer (smartphone, tablet, navigator, etc.) or to write and draw on a graphical tablet.
What to replace the stylus for android?
Variant: you can replace the stylus for the tablet with a metal tube (for example, a piece of broken off old antenna) into which an antistatic sponge is inserted. Such sponges are sold at flea markets. You can trim the sponge for beauty, and that’s it. You have got ready stylus.
Take the shorter part of the cotton swab and insert it into the hole at the top of the pen where the stylus used to be. Attach the cotton swab to the pen, remembering to leave the exposed tip. Wrap the pen in tin foil and squeeze the tip so that it presses tightly against the cotton tip.
How to make a stylus
wikiHow operates on the principle of a wiki, which means that many of our articles are written by multiple authors. Forty-seven people(s) worked on this article, including anonymously, to edit and improve it.
Number of views of this article: 253 813.
Lost your stylus? Want to draw comfortably on the tablet, not always handle the screen with gloves? Do not rush to spend money on a new stylus, which can be made with their own hands from household items.
- The iPhone, iPad, Android, Kindle, and many other smartphones and tablets have capacitive screens that require an electrical conductor (like our body) to work.
- Nintendo DS, Nintendo 3Ds, Nook, and some other phones and e-book readers have a resistive or infrared touch screen that you can use with a simple tap. In this case you can make a stylus out of almost anything (be careful not to scratch the screen).
Check your screen. Touch the screen with the tip of a pen cap. If your device is responsive, you have a resistive or infrared touch screen. If nothing happens, then the screen is capacitive.
- An inexpensive plastic pen is best if you can remove the cap and take out the rod.
- If the pen is partially transparent, it will be easier for you to follow the manufacturing process.
Cut a piece of sponge to the width of the handle. Measure by eye or press the handle against the sponge and mark the width with a marker.  X
If the back of the sponge is hard, cut or tear off the pad. Hard material can scratch and damage the screen. Only the soft side is needed.  X Source of information
Rinse and dry the sponge. Some sponges are impregnated with a special liquid, so it is best to rinse them in warm water. Squeeze out the water and dry the sponge.
Insert the sponge into the handle. Squeeze the sponge to make it thinner, then insert it into the plastic tube rod.
Leave 3 to 6 millimeters of sponge on the outside. Use your finger to gently fluff up the tip of the sponge.  X
Hold the stylus in your hand near the tip to make it work.  X Source of information Fingers should touch the part of the tube that is in contact with the sponge. If you hold on to the hollow part of the pen, the electromagnetic current will not pass through the sponge, and the touch screen will not respond to touches with the stylus.
How to make a stylus
wikiHow works like a wiki, which means that many of our articles are written by multiple authors. There were 47 people(s) who worked on this article, including anonymously, to edit and improve it.
Number of views of this article: 253 813.
Lost your stylus? Want to draw comfortably on your tablet, don’t always handle the screen with gloves? Do not rush to spend money on a new stylus, which can be made with your own hands from common household items.
- The iPhone, iPad, Android, Kindle, and many other smartphones and tablets have a capacitive screen that requires an electrical conductor (like our body) to work with.
- Nintendo DS, Nintendo 3Ds, Nook, and some other phones and e-book readers have a resistive or infrared touch screen, which only requires a simple tap. In this case the stylus can be made from almost anything (be careful not to scratch the screen).
Check your screen. Touch the screen with the tip of the pen cap. If your device is responsive, it has a resistive or infrared touch screen. If nothing happens, it is a capacitive screen.
- An inexpensive plastic pen is best if you can remove the cap and take out the rod.
- If the handle is partially transparent, it will be easier for you to follow the manufacturing process.
Cut a piece of sponge to the width of the pen. Measure by eye or press the pen to the sponge and mark the width with a marker.  X
If the back of the sponge is stiff, cut or tear off the pad. Hard material can scratch and damage the screen. Only the soft side will be needed.  X
Rinse and dry the sponge. Some sponges are soaked in a special liquid, so it is best to rinse them in warm water. Squeeze out the water and dry the sponge.
Insert the sponge into the pen. Squeeze the sponge to make it thinner, then insert it into the plastic tube rod.
Leave 3-6 millimeters of sponge on the outside. Use your finger to gently fluff up the tip of the sponge.  X Source of information
Hold the stylus in your hand near the tip so that it works.  X Source of information Fingers should touch the part of the tube that is in contact with the sponge. If you hold on to the hollow part of the pen, the electromagnetic current will not pass through the sponge, and the touch screen will not respond to touching with the stylus.
have become increasingly popular in recent years with the advent of tablets and smartphones.
Although many people associate the stylus with the digital age, it has actually been around since about 1300. up to the n. Э. In the past, philosophers and poets drew or wrote on wax and clay tablets with one.
Over the years, the material and appearance of the stylus has changed, but it is still used to communicate and express creative thoughts.
Keep reading to learn more about how a piece of metal evolved into today’s much-loved styluses, such as the Cross Pens stylus.
What is a stylus?
A stylus is a pen-shaped tool designed to work on touch screens.
You can use a stylus just like a pen on paper, except it doesn’t require ink and you use it on your smartphone or tablet.
What do you use a stylus for?
are used for a variety of reasons.Sometimes it’s just easier for people to control their electronic device with a stylus.
Others use a stylus to get creative on their smartphones or tablets.
Many people use a stylus when drawing in sketching apps. Styluses provide a good level of creative control and don’t leave smudges like a pencil.
This makes them easy to use, and these tools can often provide exceptional accuracy.
How the stylus works?
The principle of the stylus is impressive.Conductive rubber or foam will replace your finger on the touch screen.
designed to detect changes and locate them on the screen.
So, when you touch the screen with your stylus, it will be detected by sensors.
Are there different types of styli?
There are two different types of stylus; the active stylus is very similar to a pen, and the passive stylus is very easy to compare!
Like a pen, the active stylus has a tip.However, it includes internal electronic components. The active stylus can be more accurate and has pressure sensitivity, making it popular with artists!
Sometimes an active stylus can have extra functions, such as memory or “eraser mode”.
Passive (capacitive) probe
A passive stylus, also known as a capacitive stylus, allows you to write and click directly on the screen. However, it does not interact with the device directly through the stylus.
Compared to an active stylus, works quite simply. Passive stylus conducts an electrical charge from finger to screen.
The plus side of a passive stylus, such as the Lamy stylus, is that it works on all touchscreens.
Whether Android, Windows, or iOS, the stylus will work on any screen that responds to your finger.
However, compared to an active stylus, a passive stylus is not as accurate and can often block your view.
Why I should use a stylus instead of my finger?
When your finger touches the touch screen, it leaves streaks on it, and you can often damage the screen with too much pressure or scratch your fingernails.
The stylus is one of the most popular accessories in the touchscreen era, and it can be really handy!
Whether you need artistic precision, something you can use while wearing gloves, or just want to try out technology, we have a number of styli that can meet your needs.