What to do if the home button stopped working
Depending on why the home button doesn’t work on different iPhone models: 5s, iPhone 6s, iPhone 7 Plus, SE and others, several solutions can be suggested:
Touch Sensor Adjustment. How to calibrate if the key is malfunctioning: Open some system app, such as “Calculator”, press the shutdown button on your smartphone and hold it until the appropriate prompt appears, then click “Home” and wait for the software to close. After that, everything should work fine, if there was a temporary glitch.
Chemical method of solving the problem. It is suitable for the cases when the Home button on iPhone 7 (and other models) works badly, jams, or does not press, especially if there is a feeling that something inside is blocking it. Carefully wrap the food film around the phone’s body so only the home key is left outside. Spray it with WD-40 spray and press several times. After that, the dirt or crumbs that got inside should be removed
You can use dimethylcarbinol instead of the above mentioned chemical, but it must be sprayed with great care, protecting the screen beforehand. If the sprayer gives out too many drops, it is better to moisten a cotton pad with the liquid and put it on the button for a few seconds
iPhone reset. Sometimes it’s the OS that’s causing Home to freeze, and it’s worth restarting it. If you have an earlier model of iPhone (before 6), then press the off key and the home key simultaneously to initiate a reboot. Starting with 7 and 7 Plus versions there is another mechanism: press shutdown and Volume buttons Restart on iPhone 8 and higher is activated by successive brief touches on Volume. Volume. and Power.
Reflash the device. Will help owners of iPhone 7 and even newer versions, where “Home” is represented only in virtual form. Read an article about setting up the virtual button on your iPhone. First, you need to reset all your information to iCloud by going into “Settings” and selecting the “Backup” option. Then connect your phone to your laptop or PC with a cable, press Volume. and Power at the same time. Now release the last one while holding the first one until the PC recognizes the connection with the phone. Go to the iTunes app and select “Restore iPhone”. Wait for notification about the end of the process and until then don’t unplug or disconnect computer.
Software duplicate button. If the physical button is broken, then the smartphone will have to be taken to a service center. However, you can temporarily replace it with a virtual one. To do this, go to Settings. General Settings.Accessibillity and activate the slider AssistiveTouch. Under it will be an option to select the Top-Level Menu. there you can specify not only Home, but also other necessary functions.
Now you know what to do if the Home button fails. If you notice that it stops responding after launching a certain program, delete the software without any regrets, so that you do not face more serious problems.
Bringing the Home button to the iPhone (iPad) screen: how to enable and use Assistive Touch?
To bring the Home button to the iPhone (iPad) screen, you will need to:
- Go to settings, then basic, select universal access type Assistive Touch.
- Scroll the scroll wheel to the bottom of the display to quickly find this section.
- After all these operations are done, you should see a special dark square Home button with a white circle in the middle in the bottom corner of your device.
This gives you one more key to control your device, and it is very simple and easy.
In case you have the specialized Hotkey function active, you should use a triple tap on the physical button which redirects the Home button to turn off the button and also to turn it on. As for the speed at which the button is pressed, it is set individually.
One of the easiest and most accessible ways to activate such a button is a Siri command, which is always performed without much trouble.
How to remove the button from the screen
If AssistiveTouch technology has stopped doing any good at all, then it’s time to put everything back the way it was before, repeating the above instructions almost exactly, changing only the position of a peculiar checkmark from “green” to “gray”:
Go to “Settings” and open the “Main” menu;
How to Get Home Button on iPhone Screen
How to enable or disable interactive buttons on the screen of Android
The Android mobile operating system is most appreciated by users for its usability and flexibility, thanks to which the platform can be fully adapted to their own needs. Many people are not even aware of all the features offered by the OS. For example, the interactive Home button performs not only the function of returning to the main menu, which is mainly used, it can be used for other tasks.
Some users encounter a problem when the virtual buttons on the screen of the device, disappear, which often happens as a result of falling device or other mechanical effects, but it can also be a consequence of software malfunctions, such as installing an unsuitable or unstable firmware. In such situations it is a challenge to return the interactive buttons to the screen. In other cases, on the contrary, the problem is their presence, because for them it takes a lot of space on the display, which can not suit the owners of smartphones with small screen, this is usually associated with a desire to get rid of buttons.
Let’s look at how to return the buttons to the screen or remove them, and also tell you about the features of the “Home” button that you may not know.
How to make the Home button appear on your iPhone screen
As a rule, iPhone users need to display the home button due to its inoperability, which can occur as a result of either software errors or hardware malfunctions.
Open the settings on your phone and go to “Basic”.
Following the instructions in this article, you can easily display an alternative to the physical home button and assign the necessary actions to it.
In addition to this article, there are 12708 other instructions on the site. Add a Lumpics site.We will definitely be of use to you in your bookmarks (CTRLD) and we will definitely be of use to you.
Thank the author, share this article on social networks.
There are several reasons for activating the virtual key:
- The real one is broken or temporarily unresponsive;
- you don’t want to wear out the real button by repeatedly pressing it;
- You are just more comfortable to use the virtual icon.
The Home button is needed to do the following:
By the way, because of the frequency of appeals to Home it does not seldom break, then the smartphone has to be given to repair. So, the desire to hide the physical button is not as strange as it might seem at first sight.
How to remove the home button from your device screen
This feature is not always convenient. The button is always located on top, for all applications and games without exception. Even with its mobility, it can seriously interfere with viewing or playing. To hide the previously added Assistive Touch element as a whole. It is enough to go to the main menu and turn off the option. Instructions are as follows:
- go to “Settings”;
- Find the “Main” line;
- here select “AssistiveTouch”;
- in the top panel will be a green marker, which should be switched to a non-functional state (it will then be displayed in grayscale).
These manipulations will cause the item to no longer appear on your iPhone. Here’s an alternative explanation of how to do it:
You can also leave the virtual button in the service settings, but remove the “Home” item from the widget.
I work in IT and device development. I believe that a good instruction removes 90% of the questions. Open for questions and Комментарии и мнения владельцев
The home button on your iPhone or iPad does not work? Display the virtual home button on your iPhone or iPad
If the Home button suddenly crashed and stops responding, you can continue using your iPhone or iPad with a virtual Home button using Assistive Touch.
There are several reasons why the home button on your iPhone or iPad may not work. Older iPhones and iPads (before the iPhone 7) have physical buttons that wear out over time, while the iPhone 7 has a touch button that won’t work without skin contact. Whatever the reason, if you’re having trouble with the home button or just don’t want to use it, you can turn on the little-known Assistive Touch feature to bring the home button to the iPhone or iPad screen.
Disabling the home button on the iPhone screen
Sooner or later the physical home button, which has been available on all iPhones up to the eighth generation, may malfunction. As a temporary solution to the problem, you can activate its virtual counterpart in the iOS settings and place it in a convenient location on the screen. If there is no longer a need to use this control you will need to remove it. On how to do this, we will tell below.