How to open the BIOS on an Asus laptop

Let’s look at the most popular keys and their combinations for entering the BIOS on Asus laptops of different series:

  • X-series. If the name of your notebook starts with an X followed by other numbers and letters, it means that your notebook is an X-series device. To enter them, you use either the F2 key or the CtrlF2 combination. However, on very old models of this series F12 can be used instead of these keys;
  • K-Series. Here, F8 is usually used;
  • Other series marked with letters of the English alphabet. Asus also has a less common series, similar to the previous two. Names begin with A to Z (exceptions: the letters K and X). Most of these use the F2 key or the CtrlF2/FnF2 key combination. On older models, Delete is responsible for entering the BIOS;
  • The UL/UX series also allow you to enter the BIOS by pressing F2 or its combination with Ctrl/Fn;
  • FX-series. There are modern and high-performance devices in this series, so it is recommended to use Delete or the CtrlDelete combination to enter the BIOS on such models. However on older devices it may be F2.

Despite the fact that the laptops are from the same manufacturer, the process of entering the BIOS may differ between them, depending on the model, series, and (probably) individual characteristics of the device. The most popular keys to enter the BIOS on almost all devices are: F2, F8, Delete, and the rarest are F4, F5, F10, F11, F12, Esc. Sometimes you may encounter combinations using Shift, Ctrl or Fn. The most popular keyboard shortcut for Asus laptops is CtrlF2. To enter only one key or a combination of keys is suitable, the system will ignore the rest.

To find out which key has to be pressed refer to your notebook’s technical documentation. This can be done either by using the documents that come with the purchase or by looking on the official site. Enter the model of your device and go to its support page.

In the Manuals and Documentation tab you can find the necessary help files.

On some occasions the following text appears on the PC boot screen: Please use (right key) to enter setup (this may look different, but carries the same meaning). To enter the BIOS, you will need to press the key given in the message.

In addition to this article, there are 12659 other instructions on the site. Add the Lumpics site.ru into bookmarks (CTRLD) and we will definitely be of use to you.

Thank the author, share this article on social networks.

How to enable BIOS on an Asus laptop? BIOS on Asus

Asus is an extremely popular manufacturer of quality computer hardware and components from Taiwan. It is known that in Russia at least a quarter of laptops belong to this company. Motherboards from Asus have different BIOS modifications. In each case you can use several ways to access the system. But often beginners to users of Asus products have problems with opening the BIOS. We will have to figure out how to open this system, as well as learn the recommendations of professionals. Perhaps the most popular way is to enter the BIOS of your personal notebook or netbook. Go into the system when you turn on your computer but press the DEL key. You have to do it quickly, in about 5 seconds, otherwise the screen will switch to standard mode.

Windows 10. How to enter BIOS configuration? | ASUS SUPPORT

Then you can make the necessary manipulations with the BIOS. Before we start listing the other ways to enter BIOS on Asus laptops, let me remind you of some practical advice, which will be very useful for newcomers. First, it should be remembered that it is the Del key that is most often used as a system setup key. There are cases when this button does not work and you can change the “default key” to any other in the system settings. Second, if the computer was released before 2008, you should press F10 or F12, not Del. This will give you access to the “electronic version” of your motherboard. Thirdly, if none of these keys provide access to BIOS, you should restart your computer and contact Asus Technical Support.

See also  How to set up your laptop as a router

How to enter the BIOS on an Asus laptop? The Windows system is loaded very quickly, and sometimes it is not possible to catch the right moment? In fact, if you did not press the BIOS call button on time, you should simply restart the computer and retype the key. After that you can enter the BIOS. Remember that this is primarily a basic input and output system; this is how the acronym stands for. When we press the power button to turn on the computer, the system immediately begins to recalculate and boot the operating system of your Asus laptop. Some novice users ask how to enable the BIOS in your Asus laptop. This is somewhat incorrect. BIOS is always running in parallel with the main operating system.

How to enter BIOS in a laptop Asus? If everything is done correctly, you will open the famous “blue window” BIOS with the most important settings for the operating system. It was found out by experience that it is the F2 key that slows down the boot process and therefore makes it possible to enter the BIOS window on time. The fact that most laptop manufacturers today have already reconfigured their products to suit the tastes of consumers. Many users agree that F2 is faster to open the BIOS window than Del or F10. The user can choose in the “User settings” the most optimal combination of keys for his keyboard, which will be automatically directed in the BIOS. If you can’t do it yourself, you can refer to the manual or various manuals on the subject.

How to enter the BIOS in a laptop Asus? Often Asus netbooks and laptops get to the BIOS setup screen by pressing F2 right after power up. One of the main features of these machines is disordered and some complexity of using the BIOS for normal users. Also note that in principle it will be more difficult to enter the BIOS from laptops Asus, as quite quickly performs loading the basic settings of the operating system Windows, and get into the correct window BIOS no longer be able to the next reboot. Another thing to consider is the fact that the processor of the compact computer often contains specialized, advanced security settings, touchpad control systems, additional operating system, which also performs instant boot-up of Windows.

Experience has shown that it is the F2 key that slows down booting and therefore makes it possible to enter the BIOS window on time. The fact that most laptop manufacturers today have already reconfigured their products to suit the tastes of consumers. Many users agree that F2 is faster to open the BIOS window than Del or F10. As mentioned above, sometimes a special combination of keys is used, which can be set by the user, or is provided by the laptop manufacturer. How to enter the BIOS on a laptop Asus in the case when the combination of keys is provided, but you do not know what? There are several ways out. First, you should once again review the manual. Sometimes the information is on the last page or in fine print.

Secondly, you can contact the official technical support. To do this, you should either call the hotline mowing line, or write to the operator of the site with a request to clarify the situation. It’s a win-win-win-win: Asus, a reliable customer service company, is always there to help its users sort out technical problems. Thirdly, you can go to special salons for repair of computer equipment. It is there you can consult about the right key combination to enter BIOS. Perhaps in most cases it will be easy for Asus notebook users to enter the BIOS, and in case of emergencies there are useful and very practical recommendations!

How to enter the BIOS (UEFI) on an Asus laptop with any version of Windows

It is not always enough to simply use the installed operating system. From time to time every user faces the need to enter the BIOS in order to change or configure something there.

The article on this site, how to get into the BIOS is already. But there is general information. Now I want to deal with a more narrow topic, and show you how to enter the BIOS on Asus. Why did I choose this laptop manufacturer?? Because I use it myself, as, in principle, and most users.

See also  How to open the BIOS on your Lenovo laptop

How to enter the BIOS on your Asus laptop

As I said before the hardware manufacturers build all sorts of software into their products. So there are many ways to enter the BIOS, which depend on the specific model. Logging in is done using a key or combination of keys. The most proven way to look at the specs that come with the motherboard. But who will look for them at all, and even read a ton of text in search of the necessary information? That’s right, no one. So it is easiest to try all the possible combinations one by one until you find the needed combination. What a mini-quest.

open, bios, asus, laptop

Keys should be pressed while loading the operating system, or more precisely before it starts. To determine the moment, you can simply look at the monitor, immediately after you press the start button. Usually when you start the BIOS you get information about the system: motherboard version, installed operating system type, processor model, amount and frequency of RAM or something like that. Also in the corner you will usually see something like “Press F2 or DEL to run Setup”. This means you need to press F2 or DEL key to start BIOS. But sometimes there are cases when the screen doesn’t show anything at all, it’s just black. This may happen, for example, if drivers for your video card are installed incorrectly and in some other cases. So the easiest way is just to press certain hotkeys during the boot process and restart the computer every time you log on to the OS. Here is a list of the most popular combinations:

  • DEL is the most popular and most developers are inclined to. Most likely, in the near future this key will become a kind of a tacit standardized option among developers. Found on almost every motherboard manufacturer, so you should start with it first.
  • F2 is the second most popular key among the developers. Usually an alternative to the DEL hotkey.
  • F11, F12. Most often used to start the Boot Menu, which allows you to select the priority bootable media. That is with this function you can not even enter the BIOS itself and do not change the order of booting drives. This can be very useful when reinstalling the operating system and need to boot from a flash drive with a clean Windows image. However, this feature does not exist on all motherboards. This functionality is most often available on modern motherboards.
  • F10 is a rather rare hotkey, but on some older models it is the only correct one, without any alternatives, as in the case of Del and F2.
  • F6, F8 are very rare, but they are also worth trying if the other options do not work.

How to access BIOS SETUP ASUS, WINDOWS 10

Logging into the BIOS on different operating systems and motherboards

The order and method of entering the BIOS is determined by several factors. The main ones are the operating system used on your computer or laptop and the motherboard installed. Let’s look at each of them one by one.

Login principles on different operating systems

Not only the type of operating system, but also the version of the program is equally important. In most cases we are talking about Windows. To enter BIOS for old versions you need to interrupt system booting. In later versions, logging into the basic I/O system is also available after Windows has booted.

Windows XP and Windows 7

For the operating system of these versions, enter the BIOS as follows:

For some manufacturers of software and motherboards other buttons or their combinations are the keys to enter:

Approximately a similar picture is observed for laptops. The key to boot the BIOS in this case is determined by the manufacturer and model of the computer. For example, for Dell 400 these are F3 or F1.

Windows 8

From this version the user has the possibility to enter BIOS when the operating system is loaded. To do this, you must:

  • go to the “Parameters” menu section;
  • Next, successively click on several subsections: “General” / “Special boot options” / “Reboot” / “Diagnostics”;
  • After that the following menu sections are started: “Advanced options” / “UEFI firmware options”;
  • At the end of the procedure it is necessary to activate the “Restart” subsection.

Windows 10

The general sequence of actions is the same as for the previous version of the operating system. The main differences lie in the names of some sections changed in Windows 10, compared to its predecessor.

See also  Connecting an IP Camera over Twisted Pair

Login on other operating systems

Today the only real alternative to Windows is iOS. But it is based on slightly different principles, not involving BIOS. In other operating systems, entering BIOS is done by the same rules as in Windows, that is, by pressing the hotkey.

Does the type of your motherboard affect how you enter?

Another factor influencing the way of entering BIOS is the type of your motherboard. This statement is especially relevant for laptops. Each hardware manufacturer defines his own set of hotkeys to open basic input/output system.

How to enter the BIOS on your Asus k53s laptop

Asus K53 series laptops often have problems with entering BIOS. Basically this is due to the fact that these laptops are quite high-performance, and the period in which you can press the key to enter BIOS is very short. In addition, the problem is complicated by using the sleep or standby mode, in which case even pressing the right keys does not guarantee entry into BIOS.

  • Turn the laptop and often press F2, if not, turn off the laptop, press the power button and immediately press and hold F2.
  • You can also enter BIOS by pressing Esc instead of F2, Boot-menu will open, select the desired item using the arrow keys and press Enter.

This manual applies to all Asus K53s.

How ! ASUS Laptop BOOT Menu Bios Settings ! Secure BOOT ! Boot from USB ! DVD Room ,

6 Комментарии и мнения владельцев to “How to enter the BIOS on your laptop Asus k53s”

I can not go into the BIOS, there is a picture of Asus, I press f2 but nothing happens just a black screen and in the upper left corner is flashing like a space bar

On newer Asus models to get into BIOS press Esc or F2, press it right after powering on at intervals of a second until the BIOS opens. Esc will bring up the boot-menu to Enter Setup and enter the BIOS

I can not go into the BIOS, there is a picture of Asus, I press f2 but nothing happens just a black screen and in the upper left corner is flashing like a space

hello.I have an Asus x54c I can not connect the native camera.what to do.help

Go to the asus site and download the drivers if there are a few for simplicity go through them by gut feeling until you get the right one.

Leave a Reply Cancel reply

this site uses Akismet to fight spam. Find out how your comment data is handled.

How to run the BIOS on a laptop or PC

BIOS is a kind of storage of the software which affects the portable computer hardware. So often when some kind of failure is not related to the software, or when you connect new hardware to the device, it is necessary to test or configure the laptop, and for this you need to enter BIOS. To enter the system you need to press a certain combination on the keyboard before booting the laptop.

Press the power button and immediately press the F2 key to get into the BIOS of your Asus X550 laptop. Thus we get to the BIOS. Then you go to the second tab, “Advanced”. In this tab, going down by pressing the key down on the keyboard, to the line “USB Configuration”.

There is a traditional way to enter BIOS (also suitable for UEFI). press Delete (for most PCs) or F2 (for most laptops) immediately after you turn on your computer, before the system boots. Usually on the boot screen at the bottom you will see: Press the Name_keys to enter setup.

Accessing the boot menu is quite easy, just press a certain key while booting, just like you would access the BIOS setup. Usually different manufacturers assign different keys for this. It can be the F8, F11, F12 or Esc key.

Turn on the computer and press the Esc key about every second until the startup options menu opens. Press F9 to open the Boot Device Settings menu. Using the up or down arrow keys select CD/DVD drive and press Enter. The computer starts Windows.