How to properly charge your phone for the first time

How to charge a new battery properly?

The new battery should be discharged to zero, which is before you turn off your smartphone. After that, put it on a charge from the regular wall charger. Look in the manual of the phone, how much is the full charging time of the battery.

Is it necessary to fully discharge the new smartphone before the charging process? Yes! The first thing to do after buying a mobile device is to discharge it completely and then charge it to 100%. After that it is worth removing the device from the charger.

Types of rechargeable batteries

It’s important to charge your Android smartphone correctly for the first time, but to do so, you need to know what kind of battery it has. Depending on the model, and to a greater extent on the year of manufacture, a smartphone may have the following type of battery:

The first two batteries were installed on older models and are virtually uncommon today. They are characterized by a high number of cycles, are insensitive to the ambient temperature, but are thicker, have a lower capacity and have a memory effect. They have specific requirements for charging, which explains today’s misunderstanding of how to properly charge the battery of an Android smartphone.

The third and fourth types are more advanced, compact, with more capacity. Modern gadgets are equipped with these.

Why you should avoid charging a new smartphone overnight

Avoid the popular format of charging a new device overnight. Each full charge counts as a “cycle,” and your smartphone is only rated for a certain number of such cycles.

Most modern smartphones have built-in sensors to disconnect power from the network. However, when it reaches 100% charge while on, your first time phone will still lose a small amount of charge. So it is optimal to turn on “Do Not Disturb” and “Airplane Mode” at night.

What kind of charging does the Redmi Note 8 Pro support?

The new Redmi Note 8 Pro is built on the MediaTek Helio G90T processor. This chip supports MediaTek’s proprietary Pump Express fast charging technology. In addition, the standard Pump Express 4.0 compatible with USB Power Delivery 3.0.

Memory: 6GB / 128GB, UFS2 memory type. 1. Screen: 6.53 inches, IPS LCD, 1080 x 2340 dots, 19 ratio.5:9, 395 ppi pixel density, 450 nits manual brightness, 640 nits auto brightness, Corning Gorilla Glass 5. Battery: 4500 mAh, fast charging

How to charge a new iPhone for the first time?

How to properly charge an iPhone with a new battery?

  • First, attach your iPhone to the charger and plug it in.
  • The first charge of the device requires some time and is a minimum of 12 hours.
  • When the gadget reaches 100% charge, you need to fully discharge the battery, and then you can recharge your smartphone.

How to help the battery work longer

Follow these simple tips to ensure that your phone‘s battery lasts as long as possible:

  • Do not let the battery of the phone to be completely discharged. It is enough to bring the level of the indicator to 10%, and you can connect the charger;
  • It is not necessary to fully charge the phone. Several times a month it is recommended to alternate charging up to 70-80 and up to 100%;
  • Do not leave your smartphone on the network for a long time. Modern batteries can certainly cope with an excessive charge, but you should not abuse this opportunity;
  • Make sure the phone is not left in the heat or cold. Lithium-ion and lithium-polymer batteries are very capricious with respect to high and low temperatures;
  • If you don’t use your phone for a long time, it’s best to remove the battery, since an unused battery can soon, as the techies say, “fade away”.

How to help your battery last longer

Tips for charging new smartphones

In the past, smartphones used nickel-cadmium and nickel-metal hydride batteries. Modern gadgets are equipped with lithium-ion and lithium-polymer batteries, which differ from older models with longer battery life. Batteries are based on negative electrodes made of carbon materials, the battery voltage is 3-4 volts.

Lithium batteries have no “memory effect”, so there’s no need to discharge the battery to 0% before fully charging. it doesn’t accelerate battery wear and tear. Battery calibration procedure became irrelevant for the same reason. The best option is to put the smartphone on charge before the battery capacity drops below 10%. You do not need to charge the gadget to 100% either. Lithium batteries have no problem working at any charge level.

There is a controversial opinion that if you constantly discharge your mobile device to 0% and charge to 100%, after 2-3 years you will begin to have problems with battery life of your smartphone: the device will run for a few hours less. This is because the battery has charge and discharge cycles. For example, at a rate of discharge of 100% (in this case the smartphone turns off), the number of cycles will be 500. If the degree of discharge is 50%, then the number of cycles and the lifetime of the battery will increase to 1500. Again, for modern batteries this problem should be irrelevant.

It is also recommended to use the original charger. This will help increase the life of the lithium battery on your smartphone. If there is no “native” charger, it is important to choose a quality analogue.

How to speed up charging smartphone

Fast chargers are very popular nowadays. Quick Charge gives your battery a powerful pulse. Thanks to them, the recharging time is reduced. But the method has an important drawback: the battery is greatly overheated, which brings its wear and tear faster.

Charging the device is very uneven. The fastest way to get to 50-70%. The remainder takes twice as long. Users often charge the gadget only halfway, which harms the battery.

It is better not to abuse Quick Charge, and apply it in extreme cases. When there is no hurry, it is better to prefer the standard charger. It is not desirable to buy budget versions and alternative adapters that support the technology in question.