How to remove the graphics key from Samsung

How to Unlock a Samsung Using Find My Mobile

Find My Mobile. Is a special service for Samsung users that allows you to use various features. This will help you unlock your Samsung in minutes. In addition to unlocking, you can use this service as a backup and recovery platform, or you can erase data and more.To understand how to unlock your Samsung phone if you forgot your password, follow these steps. Note that to use this you need to enable the remote control feature by selecting “Settings” “Lock screen and security” “Find my mobile” enable “Remote control”. Also, be sure to sign in to your Samsung account.

Open a web browser and visit the official Find My Mobile website.

Sign in with your Samsung ID and password.

Select the “Unlock” option from the tabs provided.

Now click the “Unlock” button. It will reveal all the information about the locked screen.

KEY SYMBOL ON SAMSUNG AND ANY ANDROID MOBILE | HOW TO REMOVE DISABLE KEY SYMBOL ON NOTIFICATION BAR

Unlocking with your Google account

In case you forgot your graphics key, you can reset it and install a new one, confirming your identity with your password. If you don’t remember your password either, then you’ll need access to your personal Google account used on this device. In general, follow the instructions below.

    After the fifth attempt to enter the pattern key, the “Additional PIN code” button will appear at the bottom of the lock screen. Tap on it and enter the code that you specified when you created the key. If you don’t remember this code, select another option. restore with your Google account.

How to unlock Samsung proven ways to unlock

None of the above options may have helped you unlock your Samsung phone. Fortunately, some of our readers struggling with this problem have been able to find even more creative ways to bypass their lock screen and have been kind enough to share them. We are very grateful for this!

(How to unlock a Samsung?)

We haven’t tested these on all devices or versions of Android, so we can’t promise they will work for you. However, some people have been able to access their phone again, and we hope you do.

1) Recall your locked phone from another.

2) Accept the call and press the “Back” button during the call

3) This should give you full access to your phone

4) Go to your phone’s security settings and try to remove the pin or picture key. To do this, you first need to enter the current one, which you obviously don’t already know. The only way is to guess and try different combinations until you find the right one. If you get to that point, you can disable the pin or install a new.

Submitted by Zubairuddin Buriro (may only apply to LG phones):

Zubairuddin’s very creative method can help you in case you have a Wi-Fi connection. As mentioned above, this method can only work on LG phones because it uses LG’s own Quick Memo app.

1) Press and hold the volume up key until the Quick Memo app starts.

3) Press the share button and select SmartShare.

4) Selecting SmartShare should activate your phone’s Bluetooth and Wi-Fi (important here WI-FI).

5) Make sure that you are close to the Wi-Fi network that you are connecting to the phone.

Now you are back online and you can go ahead and try all of the above methods that require a data connection.

How to unlock the graphics key on Android.

If you forget your Android password or picture key set, that’s no reason to panic. Access to your smartphone can be restored quickly and easily, and there are several ways to remove the lock. The updated instructions explain each of them in detail. ”

How to reset the Pattern Lock or PIN code

Remove the password from the tablet can be several methods. We’ll start with simple ones that don’t affect the system, but if they don’t help you remove the lock, you’ll have to use harder ones, up to full reset, that is, reset to factory settings.

The easiest way

The easiest way to unlock your device without losing data is to use your Google account. If you remember the data from your Google account, use it to regain access to the device.

See also  How to find out the saved WI-FI Android password

Simply enter the wrong PIN code five attempts in a row. After the fifth one, a box will appear with a caption like “Forgot your password?”. You will need to enter your google account details and go through the procedure to regain access. The method is very simple and doesn’t involve losing any files of the device, so it is very desirable that you know your account registration data. If you do not remember them, you will have to use other methods.

For older versions of Android

If you have an outdated version of the operating system, you can take advantage of the security mechanisms. In this case, you can unlock the tablet if you forgot the pattern key, by calling it, as on the phone, if there is a sim card. Pick up the phone, after which it is possible to enter the settings and change the security code.

The method is only suitable on older versions of the software. Of course, this method does not work on new devices, but if your device is many years old or you just like old stable firmware versions, this simple method will save a lot of time. Otherwise you will have to use more complicated instructions.

With Android Debug Bridge

A program for debugging and fixing the device in different cases, very suitable for our situation. In order to use it you need to have debug mode enabled on your device, as well as USB and connection to a Windows PC or notebook. Of course you need to download and install ADB. Debug mode is enabled through the settings menu, which of course is not available when locked, but on many devices when connected via USB you can activate the mode directly.

After the USB connection, go to the Windows command prompt. Start. Run. type “cmd” and press Enter. On the line that appears, type the path to the ADB folder, and then enter the commands one by one. Start with any one and if it doesn’t work, move on to the next one. After each command hit Enter, one of them should help. List of options:

  • To remove the graphical key: adb shellrm /data/system/gesture.key
  • For normal passwords: adb shellrm /data/system/password.key
  • Another way: adb shell rm /data/system/gesture.key
  • Same for passwords: adb shell rm /data/system/password.key

Resetting via Recovery

If the previous methods were not effective, then to disable the graphic key on the tablet (for the regular text also works), you will need to use more hard methods: Hard Reset through the recovery or by changing the firmware. They are effective, but unfortunately will completely remove all your files.

With the firmware upgrade, I think it is easy: go to the manufacturer’s site and download the stable version. I can’t help you with that.

How to unlock the tablet through the recovery? Recovery is a mode which is accessed differently on different devices. The device has a box with instructions and a description of how to change the firmware. There you can find exactly how your gadget goes into recovery mode. If there are no instructions, try different combinations of standard keys:

In mode switch between items with the volume keys, activate the item with the power button. You need to find and activate Wipe data, then Yes (if you need to confirm). Some devices require further confirmation. choose Factory reset or something similar.

All data will be erased, but if the other methods didn’t help, you’ll have to use this one as a last hope to get your gadget working again.

How to bypass the Android lock screen with an emergency call

You can use the emergency call method to bypass the Android screen lock if, fortunately, your device is running Android 5. All you need to do is physically access the device you are about to unlock. To unlock your device using Android’s Emergency Call Bypass, you need to methodically cut and paste the characters on your device.

The Android screen lock bypass emergency call is a security loophole that Google has noticed and probably already decided to close. Most likely, people using devices running newer versions of Android will not be able to use this method to bypass the screen lock. Below, we’ll show you how to bypass the Samsung lock screen using emergency call:

Get your Android device and turn on the one you forgot your password on. Using the button at the bottom of the screen, open the emergency call window.

Enter a string of characters. For example, you can enter about 10 asterisks. Then highlight the character string you just typed (double tap the string to highlight it) and select “Copy”.

remove, graphics, samsung

Click once on the same box and paste the characters you copied in step 2 above. This will double the characters.

Repeat steps 2 and 3 until you can no longer highlight characters. This should be after about 11 repetitions.

Go back to your lock screen. Swipe to the left to launch the camera, and at the same time swipe from top to bottom to open the notification panel.

Tap the Settings icon (the gear icon). You should be prompted for a password.

In the password field, tap and hold to paste the characters you copied in step 2. Continue to insert the characters as many times as you can. Make sure the cursor is at the end of the current line before inserting other characters.

See also  How to turn off notifications on Samsung

Continue repeating step 7 until the system fails and the soft buttons available below disappear. The lock screen should now be extended by the camera screen. Wait for the camera to pop up. This should open the home screen.

Disadvantages of using an emergency call:

  • The solution to emergency calls to bypass the Android screen lock is often time-consuming.
  • You need to repeat the steps each time, as the screen lock is not removed.
  • The Android emergency dialer bypass solution only works on devices running Android 5 or earlier. People who use devices with newer versions of Android may not need the Android screen lock emergency call bypass feature.

With Recovery

The Recovery menu is responsible for resetting settings to factory defaults. Recovery in simple words. one of the main recovery modes. With Recovery you can reset your settings, install new firmware from an official representative, clean the cache and make a backup. Recovery is also responsible for data recovery, and that’s why this function is one of the most important. It will also help you regain access to your device if you have forgotten the pattern key.

But remember: after you reset the settings, the device’s internal memory is also cleared. So before you start the reset process, we advise you to transfer important data (photos, videos, audio files, and documents) to your memory card. Otherwise they will be irretrievably lost. The second way is to transfer your files to cloud storage or to another smartphone.

The way to enter the recovery is as follows:

  • Unplug the device;
  • Press the volume button and the command button at the same time;
  • you will see a splash screen with a menu where you select the reset function.

If you still have the receipt and (or) the box, you can call or write to the company’s tech support to unlock the Samsung. This is not the fastest way, but it’s still effective. But if you want to unlock the Samsung Galaxy yourself, you can try the following methods.

Find My Mobile service

This method is suitable if the smartphone is logged into the Samsung account, and there is access to the Internet. To allow your device to access the network when the screen is locked, you can insert a SIM card with 3G or LTE connected.

  • go to the official site of the service from the browser of your computer or other phone;
  • Enter the username and password of the Samsung account that you use on the locked gadget;
  • press the “Login” button;
  • If you have more than one Samsung gadget connected to your account, select the name of the desired device in the upper left corner;
  • click on the “” button in the left menu;
  • press “Unlock my device”;
  • In the window that appears, type your account password;
  • Confirm the action, the smartphone will reset the password from the lock screen.

Restore your Samsung account login details on Find My Mobile by clicking on the “Find Your ID or Password” line just below.

Security pin code

When locking with the dongle, the system requires an additional PIN code. This digit combination is recommended to write down immediately in a safe place (not on this phone).

Subsequently, if you need to unlock Samsung without the use of the pattern key with the additional PIN, you should just click on the line “Advanced. PIN” and enter the saved code.

Delete Pattern Lock via Google Account

This method of unlocking your Samsung smartphone works on models with Android up to version 5, and helps only if you forgot your Pattern Key. To remove the lock:

If there is no such inscription on the screen, it means that there is newer firmware on the phone, or there is no logging into the Google account.

Safe Mode

The safe mode on Android devices allows to fix failures that occur during the operation of the OS, as well as to restore access to the gadget, to which the password was forgotten.

How to unlock your Samsung phone from safe mode:

  • Hold down the shutdown button for a few seconds until “Disable” appears on the screen;
  • Tap on the line and hold your finger until a message appears telling you to enter Safe Mode;
  • confirm the action;
  • go to the settings and disable the password (or change the password);
  • Reboot your device to return to its normal state.

The main ways to remove the pattern key and unlock Android

You can try to bypass the graphics key on your Android phone with less radical ways that use:

You do not need to be an expert to do this, and these options work almost always. In more complicated cases this may help:

Remove the key by entering your Google account username and password

If the pattern key is forgotten, the first thing you should try to remove the lock from the device this way. The device itself will offer to sign in through Google account. If the device is connected to the network and the login and password are correct, the lock will be unlocked.

The user can also unlock the Android pattern key if they forgot their Google account. You can try restoring login settings on another device, and then use valid data on a locked device.

See also  How to disable safe mode on Samsung Galaxy

With an incoming call

If you call a locked smartphone, during the conversation you can call the settings menu, where you can manually disable the graphics key. But this option doesn’t work on all devices, only on Android 2.2 and above.

On all of them you can reset the Android Pattern Lock via an emergency call. Here there is one condition that the phone must be able to connect to the Internet mobile or via Wi-Fi, it does not matter. And you have to do the following:

  • Activate emergency call.
  • Enter the combination ##7378423##.
  • Press Service Test. Wlan in service menu.
  • Connect to Wi-Fi.
  • Sign in to your Google Account. Next, you can turn off the key with it.

If there is no router nearby, use a SIM card with mobile internet access. It is worth logging into Google when the device is unlocked.

There is a more interesting way. In this case you need an unprecedented dexterity. The point is this: if you try to dial a number and press the call button, and at the moment of switching between screens have time to click on an icon of any application, it is very likely that on the tenth attempt will be able to pull the top curtain and go to the settings.

By discharging the battery

You can try to remove the graphics key from Android at the moment when the system notifies you about the battery limit. The method is suitable for any gadget with any OS version, but requires caution. When the device will be almost discharged, it will notify you with a special message.

If you have time to click on the icon “Battery Use” in the window that opens, you can get to the statistics menu, and then go to the settings. But it is important not to miss this point, which is not easy, when the battery discharges slowly.

By removing the gesture.key

If you have installed custom Recovery and have root, the task is solved by deleting system files, responsible for entering the gesture and password.key and password.key.

The Aroma file manager archive will need to be uploaded to the gadget (without unpacking it), after which:

  • Turn the device off and enter the Recovery menu.
  • Select Install zip.
  • Click on Choose zip from /sdcard and open it in the folder with the archive.
  • Go to the system folder, locate and delete the above mentioned files. You may also erase locksettings.db, locksettings.db-wal and locksettings.db-shm.

After this operation you need to reboot the device and enter any password. Key can be changed easily. This will download and install the new GEST.zip (via Recovery). After restarting the key will not be.

By clearing partition in FastBoot mode

The device can be unlocked in FastBoot mode, which is used not only for resetting, but also for firmware installation. True, it is required to connect the gadget to the PC. When the mode is enabled, Windows detects Android as ADB compatible device with installed drivers. Then do the following:

  • Install CWM or TWRP Recovery menu from FastBoot mode on the gadget. In Samsung you can flash Recovery only with the help of Odin program.
  • Go to the Advanced menu, then to the file manager.
  • Find the system folder, where you can manually delete the key files.

If you put the FastBoot utility on your PC, it is better to do it as a package with the official Android SDK. You will also need a fresh version of Java. But the easiest way is to use the Adb Run program, which contains the necessary commands and knows how to unlock the graphics key. This is how it’s done:

  • Adb Run and Android drivers are installed on the PC.
  • The handset will be put into FastBoot mode.
  • Starts Adb Run.
  • Goes to the Manual Command menu and then to the ADB section.
  • Enter command “fastboot erase data or fastboot.w”.
  • The smartphone or tablet is rebooted.

Full reboot depending on the model of the gadget

If the described methods will not give you the expected results, you need to reset the key through the engineering menu. The process is called a reset, or Wipe Data. And after that you need to reset the device. To enter Engineer menu is made differently on different devices.

Using the firmware

Flashing completely updates the gadget content including user settings and graphical key. In addition, all files and programs installed by the user are removed from the device. This is responsible and serious work. The procedure requires some knowledge, an additional computer with installed programs and a lot of time.