How to reset your laptop to factory settings

Reset (or Hard Reset). this is the procedure to return to the factory settings. All options and settings will be returned to their original settings.

There are two types of reset in Windows 10:

With saving of user files. After the reset, you will get a completely new system with only the standard apps for the assembly installed. All settings will be reset, but files and folders with photos, videos, documents will not be deleted;

Complete deletion of all data. As a result, you will get a copy of the OS that is identical to the “clean” Windows that you just installed. You will need to do the basic setup (specify region, date, time, log in to your account or create a new one).

Reset your system to factory defaults if your computer starts to slow down, programs take too long to load, or the system loads more than a few minutes.

  • All unnecessary programs and processes will be removed;
  • Erroneous settings and temporary files that “clutter up the system” will disappear. Instead, the correct settings will be set, which will ensure the normal operation of the OS;
  • Viruses, adware and other malicious applications are removed.

If you have encountered viruses, it is recommended to perform a reset without saving user information. Otherwise, there may be a process left in the system that runs the “pest”.

The procedure of the rollback procedure on laptops of different brands

Universal method of rollback by means of Windows

This method is suitable for devices of any brand and model with the preinstalled operating system Windows 8.1 or 10. It features a rollback to the original settings, built into the OS itself.

To start the procedure, do the following:

  • Boot the Windows in normal mode.
  • Open the Settings utility, click on Updates and Security. In the column on the left, select “Restore”.
  • At the top right of the window is the “Restore computer to its original state” item, and below it is the “Start” button. This is what we need.

reset, your, laptop, factory, settings

  • After clicking on the button, a window will open to select the option, or rather, the rollback option. To completely reset the system to its original state you should select “Delete everything.
  • The penultimate step of preparation is to choose one of two rollback methods: with or without disk formatting. Choose the second one again: click on “Delete files and format disk”.

In about 30-60 minutes you will get your laptop in all its pristine virgin cleanliness.

Rollback from the Windows RE environment

In the case of problems with starting the operating system (namely its hardware, not), or in any other system faults you can rollback to the factory settings from the recovery environment.

The recovery environment serves the same purpose for boot failures for a variety of reasons. During Windows 10 installation, it is installed in a separate, locked area on the hard drive. It has its own boot loader which is independent of the main system’s boot loader functionality.

The Win RE environment includes various tools to fix Windows issues. One of them is a means of restoring the computer to its original state.

From a running operating system: Open “Settings. “Updates and security”. “Restore” “Special Boot Options” and click “Restart Now” or with your finger on the Shift key, click the restart button in the Start menu.

If Windows does not boot: Restart your notebook by pressing the power button twice. If the third attempt to start the primary system fails, the recovery environment will automatically boot.

  • If the “Automatic Restore” or “Restore at boot” screen appears, click on “Advanced Settings.
  • The next screen (and the first screen you will see if you are coming from a running operating system) will ask you to choose what action to take. Click on the screwdriver and wrench icon “Troubleshooting”.
  • If the drive has more than one partition (not including service partitions), the recovery tool prompts you to select the cleanup area. the system disc or all discs. Again, select all.
  • Before the final step of the configuration the usual Windows 10 splash screen will appear on the screen with the words “Preparation is in progress”. It might take a few minutes. Do not take any actions during this time; do not restart the computer otherwise you will have to start over.
  • You are almost there. When the undo tool again prompts you to reset your computer to its original state and asks if you agree to clean the disk, click “Full disk cleanup”.
See also  How to tether the Apple Watch to your iPhone

The process will continue without your input. After a short time the notebook will be back to the pre-purchase condition.

Experienced users know that the recovery environment runs and with the installation media Windows (flash drives, DVD-ROM). Alas, it will not suit us, as there is no means to rollback the system to its original state. It can be present only on the disks of specially built branded distributions from computer manufacturers.

Restore factory settings on your HP laptop

So, to perform this operation on your HP laptop, you need to:

  • Turn on the laptop and press the F11 key, the Recovery Manager will appear.
  • Select System Recovery.
  • If you are prompted to save the necessary data, save it.
  • The data recovery process will start, also do not touch anything, the process is automatic and the computer. The computer may restart several times.

Samsung

It’s the turn of the South Korean manufacturer and the answer to the question of how to return a Samsung laptop to factory settings.

Restore the factory settings of your Samsung laptop:

  • Press the F 4 key when you turn on your computer.
  • Accept the license agreement and go to “Recovery.
  • Run “Full recovery”.
  • Specify a checkpoint (earliest by date, with factory settings).
  • Run the rollback procedure and wait for its completion.

You have understood how to reset the Samsung laptop to the factory settings, so you can forget about the need to reinstall the system.

It’s the next manufacturer’s turn: let’s see how to reset your HP laptop to factory settings.

To reset your HP laptop to the factory settings:

  • Right after turning the device on, press the “Esc ” key.
  • Select ” System Recovery ” by pressing the F 11 key.
  • Select “Restore to the original state”.
  • Check “No copy” box.

Now you know how to reset your HP laptop to the factory settings. You just have to wait until the factory reset procedure is finished. And start working with the laptop again.

Do you want to know how to reset your MSI notebook to the factory settings??

There is nothing complicated here either:

  • Immediately after powering on, press the F3 key until the “Windows Boot Manager” window appears on the screen.
  • Press Enter. To run ” Windows Setup “.
  • Select “MSI Recovery Manager”.
  • Click “OK” in the warning box and wait for the system rollback to complete.

That’s all you need to know about how to reset your MSI laptop to factory settings.

When not to try to recover the operating system

There are situations when trying to restore the system can lead to bad consequences.

The notebook will not boot, there will be an error during the procedures which we will talk about further or the computer will refuse to turn on at all.

It does not happen very often, but it does happen.

So here’s a list of cases when you not only shouldn’t try, you shouldn’t perform a factory reset:

  • The operating system was reinstalled. That is, you bought your laptop, but over time decided to update the OS. The matter is that this procedure deletes the hidden recovery partition from the hard disk. Without it, performing a reset will simply not be possible. Interestingly, this does not always happen and experienced craftsmen do not remove this partition, but in 95% of cases it still happens.
  • operating system reinstalled without removing the above mentioned partition, but with full formatting and re-creation of the hard disk partitions. Other necessary data will start.
  • The hard drive (HDD or SSD) was damaged badly. If it has been replaced with a new one, there is no need to do a reset either.
  • The manufacturer has not provided a recovery option. To check this point, go to your manufacturer’s website, contact Support (better to call). This way you can find out if it is even possible and how to use it.

Conclusion of the above: In most cases you can only reset your laptop once in its entire lifetime! Unless you have reinstalled the operating system without deleting the special partition and reallocating the hard drive partitions. You can still try to find a special recovery disk.

How to reset Windows 10 to Factory Settings

If none of this applies to your case, you have not reinstalled the operating system, you have not kicked the hard drive, you can proceed with the further instructions.

See also  How to configure the FN button on the Lenovo laptop

Samsung

On Samsung laptops it goes like this:

  • Reboot your computer. Immediately after the shutdown, constantly press the “F4” button on the keyboard.
  • The utility we need will be displayed. You can read the license agreement and accept it.
  • Next click on “Restore”.
  • On the scale under “Selecting a recovery point” select the far left position, that is, the time when you first started using the device.
  • Interestingly, here you can save some of your data. To do this, mark them under “Saving user data” (scroll down the window).
  • At the end click on “recovery” at the bottom.

This tool will look a little different on some models. Then select “Restore”, then “Full Restore”, select the “Factory Settings” or “Computer Initial Status” point. You will be prompted, click “Yes” and follow the instructions.

Performing a reset

Resetting Windows 10 is much easier to do than rolling back to factory settings, like Windows 7. The point is that the “ten” already contains a recovery distributive, which can be used at a difficult moment, without using additional disks or bootable flash drives. Let’s see how to do it.

Reset from under a working operating system. This is done with the “Preferences” menu. Click on “Start” and the cogwheel icon. In the new window find Update and security. Recovery. Restore the PC to its original state. Under the prompt to restore your computer to its original state there will be a “Start” button. Now choose if you want to keep any of your documents intact or not. The last option will save time but is only good if there is nothing special about your PC or if you plan to sell/gift it to someone else. Once defined, click Reset and wait for the process to complete.

Using a third-party utility. It is also possible to reinstall the system through the Refresh Windows Tool, a special tool that can be found on the verified Microsoft website. To get to it, first do everything as in the first method: “Start” “gear” Update and security. Recovery. Only now pay attention to the sentence: Learn how to start over with a clean install of Windows. You will be redirected to a website where you will see an Install Now button. this is what you need. Run the downloaded file and answer the questions about how you want the OS to look, and then initiate a full cleanup process. This reset method is only suitable for PCs or laptops that are less than four years old.

Resetting Windows when it won’t boot is not an easy task, but it can be done if you have a boot disk (flash drive). Plug it in and look in the left corner. you need to click on the Recovery option. Next look at the Find and fix faults section with the picture of the repair tools. The first item there will be a diagnostic and a suggestion to return to the factory settings. Again, specify if you want to save files and accounts, enter the password for the main one, and then click Return to the original state.

After either of these actions, you may have a Windows folder on your system drive.It is a very old program, taking up a few gigabytes of space, but it is absolutely useless. You can get rid of it this way:

  • Type “Run” in the system search box.
  • Right click on the program name.
  • Select Run As Administrator so that the OS will not tell you that you do not have enough rights.
  • Type in: cleanmgr.
  • Select the partition where your system is stored.
  • Click on the Clean up system files button.
  • Check the “Previous Windows installations” box (leave the rest as is if you don’t know what to do with it.
  • Start the cleanup.

Now that we’ve figured out how to restore factory settings on the OS in general, let’s look at each individual case depending on your laptop brand.

Ways to restore the factory settings on your notebook

Both the user and the wizard can perform this operation. But turning to the wizard is fraught with the loss of an impressive sum. And any specialist will only do the replacement of the system to solve the problems described above. It is better to perform a reset yourself.

The most simple and widespread method is to restore the settings during booting. This is how it is done:

  • It is necessary to turn on the laptop and immediately start repeatedly pressing the F8 button. The purpose of this action is to display the “Advanced Boot Settings” menu.
  • Selecting options in this menu is done with the up/down arrow buttons. You should highlight the line “Repair your computer” and press the Enter button.
  • Message about restoring the system will appear in the information window. If the user has previously set a password, you must enter it and confirm the start of the operation.
  • The Windows System Restore Wizard will launch, where you’ll need to enter “System Restore Options”. Then you have to wait until the system recovery is over and you turn the laptop on.
  • Operating system is restored. Now you need to update drivers and install necessary programs.
See also  How to turn on the timer on your Samsung TV

This process is much faster with licensed operating systems. But it can be done only by “advanced” users. This is how it should be done:

  • Using the right mouse button select “My PC” shortcut.
  • The system properties item is highlighted.
  • Open the system restore tab
  • Click on the recovery icon.

If there are restore points, the factory reset process will start. There is also an icon for creating restore points, files with OS settings, which may help in case of future failures.

It should be explained what a restore point is. When the OS works, at some point it remembers its settings and saves them in a separate file. When the OS needs to restore, it connects this file and reads and updates from it all the parameters saved in it for a certain time.

Performing a reset

Windows 10 has several built-in methods to perform the reset. Microsoft has also released a separate utility that performs this process. You can also do the reset from within the system by logging into your account, or in another way that does not require access to Windows (useful if the system does not start).

Using the “Options” menu

Windows 10 has a new menu that allows you to work with system settings. “Settings”. Using it, you can start the reset:

    Using the system search bar, expand the “Settings” utility.

The easiest way to access your computer’s settings is to start typing the name of this menu in the search box

Open the “Update and security” section

If you are determined to reset the operating system to its initial settings, press the “Start” button

Specify if you want to keep your files during the reset

In order to start the process, press the “Reset” button

How the process works

Reset lasts from a couple of minutes to several hours. depending on the performance and load of the computer. The system will reboot several times. Do not interrupt the procedure under any circumstances, otherwise serious errors may occur. It may seem that the system is frozen, but give it some time (half an hour to an hour), and only when the time has passed, force the reset procedure to end.

Using a third-party utility

Microsoft has released a third-party utility called RefreshWindowsTool, which can be used to perform the same reset.

    Download it from the official website page. https://www.microsoft.com/en-ru/software-download/windows10startfresh. It is free and does not require installation.

Download the recovery tool from the official Microsoft website

Click on the “Start” button and wait for the process to finish

Using the restore menu (if you cannot access the system)

If you can enable the system, it is better to use the above two methods as they are faster and easier. But if there is no way to log in to Windows, you will have to resort to this method. To perform the procedure, you will need one working computer, because with it you need to create the installation media Windows. To access the recovery menu.

    Go to the official Microsoft web site (https://www.microsoft.com/en-ru/software-download/windows10) and download the MediaCreationTool, which allows you to create an installation flash drive. You will need a medium with at least 4 GB of memory and formatted to FAT32. Run the tool and burn the image to a flash drive using the built-in instructions. If handled incorrectly, the utility can reset the computer you’re working on, so be careful when using it. Be sure to select “Create an installation disk for another computer.

Tell the program that you want to create installation media for another computer

Press F12 or another button, which is responsible for entering the boot menu on your computer

On the Boot tab instruct the system to start booting from a USB flash drive (USB-HDD)

Click on the “System Restore” box

Navigate to the “Troubleshooting” section

Select a reset condition under “Advanced Options” and click on the “Reset Computer” box