Digital TV settings instructions
Haier TVs recently appeared on the Russian market, but have already managed to arouse great interest among buyers. Questions about who the manufacturer is, how to configure equipment for receiving an air signal, how to connect the phone requires not just an answer, but detailed and detailed explanations. However, the reviews of buyers and specialists on models 65, 55, 50, 43.32 inches look quite positive, it remains only to study the detailed review dedicated to the Haier brand TVs and draw their own conclusions.
How to determine whether the Hyer is supporting the DVB-T2 format?
Haier produced a new line of TVs of the middle price category. Due to the low price and relatively good quality, new models are in great demand among the population.
This is due to the fact that it has practically no significant disadvantages. And the pluses include:
- Low cost.
- Multifunctionality. It is possible to view digital TV, Internet access.
- High image quality.
The most frequent question is asked by TV owners recently associated with support for digital television. You can find the answer to it in several simple ways:
- See in the instructions. In the section on technical characteristics there should be a item that says about the support of the digital standard. If it is available, the TV supports digital TV.
- Find a description of the product in the online store. It is necessary to open the section “Characteristics”, then the subparagraph “signal reception”, which should be written about the support of DVB-T/T/T.
- In the absence of instructions, as well as descriptions of the characteristics of the TV on the Internet, the necessary information can be found in the manufacturer’s service center.
Settings and work
This is what Haier DMA6000 looks like in a connected form.
At the first turned on, the greeting page is displayed, with its help you can configure.
Search for the network is furious, the shooting points of access (MIC) are shown and one of the neighbors had an open point (DIR)
Choose our access point, enter the password, ready.
Basically, the latest windows are displayed, the weather widget (Magnitogorsk in the list of cities is not, unfortunately), the transition badges to the settings and the application selected by the user.
Built-in Internet facetor is quite convenient.
Allows you to add bookmarks, view history and save pages.
In addition to watching films and listening to music on the network, the installed programs allow you to play media files from external media. The formats are supported:
Frequent errors and their solution
If the TV has a hairdry of an obsolete model, then you need to purchase the appropriate prefix, which produces digital equipment.
Frequent the absence of a signal is irrelevant software. Modern models update the Internet software, but you need to make sure that the automatic update function is active.
This problem is also relevant for the prefix with the DVB-T2 tuner. In this case, it is necessary to flash software again.
Haier TV of this model requires a fairly small number of connections. At this stage of settings, you need to perform the following manipulations:
- We connect the power cable to the power socket.
- Antenna wire to the corresponding connector.
- If you plan to connect to a global web using a twisted pair, then such a wire connects to the port of RJ-45. In practice, it is still more convenient to use Wi-Fi. It is on this wireless method of transmitting information that it is recommended to opt for.
Nuances for devices with Smart TV function
Attention. For different Smart TV models, the configuration process is generally similar, but still has some differences.
First you need to connect the antenna. To do this, take 3 steps:
- We connect the power cable.
- Connect the antenna to the corresponding connector.
- To connect to the Internet, connect the cable to the port RJ-45. You can also use Wi-Fi. The second option is more convenient.
To configure digital television on Haier TVs, follow the following actions:
- Pour the Muni button and go to the “Channel” point. Click “accept”.
- Select the DVB element. Select “Antenna” or “Cable”.
- Select the desired type of adjustment between manual and automatic.
- Install the configuration. Select DTV and ATV in the point “Settings mode”.
- Choose your country.
- You don’t need to choose an operator. Just click “Another”.
- Press the Avtopoisk button and wait for its completion.
Found channels are automatically stored in the memory of the TV.
Important. If you suddenly stop the search, the TV will remember the channels found.
In this case, you will have to repeat the procedure again. This can happen if you accidentally press the button on the remote control, so it is better to place it in a remote place.
Wireless and wired connection
A smartphone on Android or iPhone can be synchronized with a Wi-Fi TV, connecting them to a common home network. Haier does not support the wire connection with Apple gadgets via USB as a drive. There is no such problem with Android devices. On the iPhone to broadcast from the screen, you need to use additional applications or Chromecast.
The most simple way to connect is the use of HDMI to the computer. To play content, it will be enough to choose the right port in the menu as a signal source. The cable receiver, game console is also connected.
The optical output of TV allows you to connect a cable to it for connecting with an audio core input of external acoustics. For wired connection via the Internet on Haier TVs there is LAN input.
We set up digital channels on TV Hayer
Now let’s see how to configure Haier TV for digital television. The company was engaged in the production of televisions before the appearance of digital television around the world. Therefore, models that still work with users for almost decades may not be able to support digital television. Especially for them, you need to purchase digital decoders (TV tuners).
Setting channels on the Haier TV. Automatic and manual
To configure digital channels on your cheerful intellectual TV and watch a digital TV, find the Muni button on the remote control and click it.
Then find the option of the channel and click OK.
Go to the DVB antenna and select a cable or antenna.
Then select automatic settings or manual search.
In the “Auto Nastro” section, select the parameters.
How to Tune Analog and Digital Channels on TCL S6500 TV. URDU / HINDI
Select DTV for digital channels and ATV for analog channels. If you want to use both digital and analog channels, select DTV and ATV.
Then you must choose the country, leaving Russia.
The operator introduces another, you do not need to choose operators from the list, just enter something else and that’s it.
Search type choose full, if you know the frequency of your operator, then install the network and go through the settings below.
Then turn on the automatic search and wait for digital channels on your Haier (Haier) TV.
What doers need to know Smart TV from Haer
How to set digital television on Hyer TV equipped with Smart TV and DVB-T2 standard? In this case, everything is a little easier, because you do not need to buy an additional receiver:
Watch your favorite films and TV shows on any device with TV for just 299 per month. Do not miss 7 days of free subscription!
- Connect the antenna to the corresponding antenna connector on the Smart TV.
- Connect the TV to the mains.
- Using the remote control, click the Muni button and in the open menu “Channel”.This is good”
- Select DVB “Antenna”. Or “cable”
- Click the desired type of settings “Automatic”. Or user guide
- Installation DTV and ATV to the “Settings of the regime” position
- Raise the country.
- Skip the element with the operators by pressing the “next”.
- Click on “Automobile”. And wait for the process to complete.
- Discovered television channels are automatically stored in the memory of the TV.
Do not press any remote control button for channels. Otherwise, the search will be canceled, the TV will remember a small number of channels found, and the entire procedure will have to be repeated in accordance with the instructions.
Review of reviews
According to experts, Haier TVs can be called a successful discovery for the Russian household appliance market. The range of products is not too wide, but it presents all the necessary options for use in different rooms of the house or apartment. It is noted that in terms of quality of implementation of technology 4K, the company is still inferior to leaders. The rest, including the design of the technique, the brand deserves the highest assessments.
Customer opinions about Haier TVs were divided. There are those who, having hastened to save, returned the goods to the store due to unjustified expectations. However, most buyers are enough and matrix, color reproduction, and the implementation of Smart functions. Since the brand is relatively new, it is treated wary, but with real comparison with more expensive analogues in the store, they still decide to purchase goods.
Among the obvious advantages of Haier TVs, a great perception of the Wi-Fi signal is noted-you do not have to keep the router in the immediate vicinity of the TV. The columns also play loud enough, in stereo, there is a change in settings, the inclusion of a special option for volumetric sound. Buyers also note a sufficient number of slots with the possibility of not only reproduction from USB carriers, but also recording content. In addition, you can install a connection with the phone, play video files from it.
Users attributed a long turning on to the disadvantages. After the signal is filing, the TV for about 20 seconds is loaded. In addition, not everyone immediately manages to understand the settings menu, and the scale with which the sound is adjusted occurs in the center of the screen. The Wi-Fi network is looking for a TV every time-this also takes time.
How to set up a Haier TV
Haier has released a new Smart TV line, Haier TVs (Hayer), thanks to its price category, can allow everyone, because the cost of Smart Haier TVs is much cheaper than popular brands.Haier Smart TV TVs have a built-in DVB-T2 and DVB-s, which allows you to watch digital television and go online.
Haier LED K6600 50″ Android TV 2020 | iLight Pro
- How to set digital television on Haier TV (Hayer)
- How to connect the Internet on Haier TV (Hayer)
- How to configure Smart TV on Haier TV (Hayer)
How to set digital channels on Haier TV
In order to configure digital channels on the Haier Smart TV TV and watch digital television, find the Muni button on your remote control and click on it
Next, find the channel item and click OK
We go to the dvb antenna and select a cable or antenna
Next, select auto.Navigation or manual search.
At the auto.Navigation point, select the parameters.
In the settings mode, select DTV is digital channels ATV are analog channels, if you want the number and analogue, then select DTV and ATV
Next, you need to choose the country leave Russia.
The operator put others, do not choose operators from the list, just put others and that’s it.
Search type choose full, if you know the frequencies of your operator, then put the network and drive the parameters below.
Next, we turn on the auto.Poin and wait for the digital channels on your Haier TV (Hayer).
How to connect the Internet on Haier TV
In the Haier TV TVs, Smart TV is possible to enter the Internet via Wi-Fi or via cable connection.
In order to connect and configure the Internet on your Haier TV, go to your TV menu.
Next, we find the network configuration point or all
Next, select the Wi-Fi connection method or cable
If we choose Wi-Fi, then click Wi-Fi configurations
All your Haier TV (Hayer) TV is connected to the Internet and you can use all Smart TV capabilities.
How to configure Smart TV on Haier TV
After you have connected and set up the Internet on your Haier TV (high), all Smart TV applications will be available to you immediately.
In order to look at YouTube, you just need to find the button on your remote control, if the button is absent, then click on the button and select the application you need except YouTube there is a browser for direct Internet access on TV.
Also on your remote control should be the Arr button Pressing on it, you will go to the applications that are loaded to your TV.