How to set up a radio at the Samsung Music Center

Radio: manual setting, automatic setting, broadcasting in RDS format

First of all, you should find out the name of the model of your cinema! Nevertheless, there are general algorithms for configuring FM-radio home cinemas of Samsung. Firstly, you must have a FM radio antenna with a good signal a piece of wires that must be inserted into a special antenna cinema nest. Secondly.Set the Function remote control button and select FM.

Schemes, reference books, datasheet: price lists, prices: discussions, articles, manuals:

Go to the search results

Watch the video: Samsung Max-Kdz120 Very detailed review

Copying cassette (rewriting)

You can copy the cassette from deck 1 to Deco 2.

Copying is made at normal speed. You do not need to adjust the volume, as it does not affect the recording. Be careful not to install on Deco 2 cassette that you want to copy, since it will be

Turn on the system by pressing the readiness button/v.

Install a cassette without an entry in a cassette deck 2.

(Rewriting) to start copying the cassette.

To stop the rewriting, press the stop button

The corresponding symbols and the cassette installed on Deco 1 are copied to the cassette in December 2.

How to enable and configure the radio at the LG music center

Musical centers, or as they are more often called today, musical audio systems, LG have an impressive design, powerful volumetric sound and a wide range of options that will satisfy even the most demanding music lover. Among them are the functions of karaoke for those who like to sing at home, club or LED backing for fans of parties, DJ effects and much more. Also, all LG music centers without exception provide for the ability to listen to radio (FM tuner).

After the first inclusion of your music center, you will need to configure radio stations and add them to memory. Depending on the model in memory of the LG audio systems, you can enter about 30 radio stations in the AM/FM ranges. This is very convenient, since you do not need to configure the radio manually at every turning on the music center. How to enable FM tuner and configure the radio at the music center, you can read in the user guide, which comes with your LG music center. However, if for some reason the instruction for the technique is lost, you can familiarize yourself with the leadership here on the official website of LG, especially since the process of setting up radio does not take much time and does not require special knowledge.

Radio setting up at a music center LG: step-by-step instruction

Before starting the radio settings, make sure you reduced the volume of your LG music center to minimal indicators.

  • Turn on the music center by pressing the Power button. It is located on the front panel.
  • Find the Tuner/Band button at the music center or remote control. Click it sequentially several times until the AM or FM symbol appears on the audio display window of the audio system.
  • After that, click and hold Tuning Down / Up until the frequency indicator begins to change. After that, release the button. The audio system will start scanning and stop automatically as soon as the station is found on the air.
  • After that, press the PROG button. / Memo on the front panel. On the display you will see the figure. Under such a number, the radio station will be entered in memory of the music center.
  • If you want to change the number, then click Presset Down / Up at the Music Center itself or Presset on the remote control panel.
  • Programm the desired number using the PROG key. / Memo, located on the front panel of your Musical Center LG
  • Other radio stations you need can be programmed in the same way: click Tuning Down / Up and hold until the frequency indicator changes. The audio system will find the following station, and you will only have to add it to the Musical Center Musical Center by the Prog button. / Memo.
See also  When you turn on your computer american megatrends

Important: also you can set the radio at the LG music center manually. Using the Multi Jog Dual Control handle. This function can be useful if you want to configure the radio station with a weak signal.

Removing radio stations from the memory of the music center LG: step-by-step instruction

If you want to remove all the radio stations from the memory of your music center, this is what you need to do:

Why T2 shows blackly white?

The cause of the black and white image may be a manually installed in the TV settings system, different from PAL. In this case, you need to find a color system control in the TV menu and set an auto.Mode or PAL mode. It is in this mode that by default, the video signal of digital consoles is broadcast.

First, code 991 is entered, after which the channel switching button is pressed. Each switching includes one code from the list of list programmed in the prefix.

Music Center? Samsung? ? ? ?

Hello Friends, sell music center Samsung. Because I do not use it, and he is inactive idle.

Simple elementary tips, as for my surprise, many do not know this

  • The device cannot just play classic radio stations, with its help you can listen to music and Internet radio.
  • With Bluetooth you can synchronize the device with all gadgets. It is very simple to install it.
  • The system can be easily connected to any device and used as a sound amplifier, for example, on a TV.
  • The built.In function of karaoke guarantees the quality processing of any composition. As a melody, this option is described in detail in the leadership.
  • Excellent sound system that creates pure high.Quality sound.

How to save the radio channel on a radio pioneer?

While in the radio mode, just very shortly, short buttons to the left or right, you manually “boil” to the desired station if you know at what frequency it is located and remember it by holding the button of the desired channel (1.2.3.4. 5.6).

  • Check the car antenna
  • Check the antenna compounds
  • Buy a new radio antenna for a car
  • Install the radio signal amplifier in the car
  • Change the radio machine
See also  How to enable always display on Samsung

How to save the radio channel on a radio pioneer?

While in the radio mode, just very shortly, short buttons to the left or right, you manually “boil” to the desired station if you know at what frequency it is located and remember it by holding the button of the desired channel (1.2.3.4. 5.6).

  • Check the car antenna
  • Check the antenna compounds
  • Buy a new radio antenna for a car
  • Install the radio signal amplifier in the car
  • Change the radio machine

Listening to the Radio Home Cinema Blu-ray Samsung 3D Blu-ray Home Cinema System HT-F4550

Display of information about the image, including the name, size, etc.D.

Depending on the reproduced disk or the menu device used, the service may look different. Not all parameters may be displayed.

To turn on the function of the background music, the photo file should be on the same medium as the music file. The sound speed mp3, the size of the photo and the encoding method can affect the sound quality.

Creating a list of photo playback

The list of photos of photographs can be created similarly to the list of playback of music files. Instructions see. In the section “Creating a list of music files” on page. 26.

Using buttons on the remote control

Press the Function button and select FM.

Tune in to the required radio station. Settings for pre.Installed

Radio stations 1: Press the button 5, select the Presset parameter and press the Tuning Up button, Down to select a pre.Tuned radio station.

Pre.Installed stations, it is necessary to add pre.Installed stations to the device memory. The list of preliminary radio stations is presented below.

Select the Manual parameter and then click the Tuning Up button, Down to configure at a higher or lower frequency.

Automatic Settings: Click the button

5, select the Manual parameter, and then press and hold the tuning up button, Down to automatically search for stations in the selected range.

Press the MO/S button. With each click, the button occurs

Switching between stereo and mono modes.

In the area with a poor welcome, select the regime

Mono for receiving a radio signal without interference.

Preliminary tuning of radio stations

Example. Preliminary setting on the radio station FM 89.Ten.

Press the Function button and select FM.

Press the Tuning Up, Down button and select.

Press the Tuner Memory button. The number starts to blink on the display.

Press the Tuner Memory button again. Press the Tuner Memory button for now

After the Tuner button is pressed

Memory number will disappear from the display, and the station will be saved in memory.

For preliminary tuning another radio station, repeat steps 2-4. For configuration for preliminary

A configured radio station press the Tuning Up, Down button.

Using the TV Sound button on the remote control

If you have a TV with support for Anynet (HDMI-CEC) function, using the TV Sound button, you can display the sound from the TV through the loudspeakes of the home theater or TV. To use this button, follow the following actions.

Connect the HDMI cable to the TV or home theater. (Cm. P. Fifteen.)

Select Anynet (HDMI-CEC). At home theater and TV.

Press the TV Sound button on the remote control. On the front panel display will flash TV Sound ON, and then mode D will be displayed. In. If the TV Sound function is turned on, the sound with

See also  How to set a reminder on Samsung

TV is displayed through the loudspeakers of the home theater.

Press the TV Sound button again to turn off the TV Sound function. If the TV Sound function is turned off, the sound with

The TV is displayed through the loudspeakers of the TV connected to Anynet.

1) if you want to listen to the sound from the TV

Through the loudspeakers of the home theater.

2) if you want to listen to the sound from the device

USB connected to the TV, through the loudspeakers of the home theater.

radio, samsung, music, center

Listening to the radio microsystem Samsung Micro Audio System E330

Select the radio station in one of the following ways:

By pressing the Tuning/Album button ,

To quickly search for frequencies manually, press and hold the Tuning/Album button, or

Press the MO/S button to switch between stereo modes and mono.

In the zone of a weak signal, select Mono to get a pure sound without interference. This function works only when listening to the FM radio station.

Preliminary setting, return to step 3 and

A. Press the Enter button.B. Press the [,] button on the top panel or

Tuning/Album button, or on a remote control to select the program number.

C. Press the Enter button. To save preliminary setting.

To save other radio frequencies, repeat steps from 2 to 5.

To search for radio frequencies in Manual mode, use the [,] buttons on the top panel of the device. To stop the search, press the Stop (@) button. Search for pre.Installed setting in Presset mode can be performed using buttons [,].

Using RDS (radio data system) to receive FM stations

RDS makes it possible to send FM stations

Additional signal along with ordinary

These can be the names of the stations, as well as

Information about the type of translated program

When setting up a FM station that provides

How to setup & use NFC on any iPhone

RDS service, the RDS indicator lights up on the display.

Programs translated at the moment.

Display of the name (consists of a maximum of 8

RT (radio text): text conversion (consists

Maximum of 64 characters), broadcast

Station (if such a service is provided).

Stations may not provide pty data

(Type of program), RT (radio text) or CT (code

Reflection of real time), in this case

Ta (road messages): The symbol flashes at

Музыкальный центр Samsung MAX-KJ740

In the way, if the configured station transmits

RDS signals sent by the station are displayed

On the display.Press the RDS Display button during

Information on the display changes indicated

Below: PS NAME; RT; CT; Frequency

You can listen to the preserved radio station as follows:

Press the Function button to select FM.2. Press the Tuning Mode button on the remote control