How to tie the Apple Watch to another iPhone

How to set up the Apple Watch Series 3, 4, 5, SE, 6, 7 after purchase: instruction

After buying a smart watch from Apple you need to perform the initial setup procedure, which takes 10-30 minutes, depending on the amount of content downloaded to the device. Step-by-step instructions with explanations for setting up the Apple Watch are below.

How to detach (pair) an Apple Watch without an iPhone method 2

It is possible to detach the watch from your smartphone, even if the two devices are not near each other (for example, if the iPhone is lost). To do this, you should go to the “Settings” application on the Apple Watch (the icon with a gear), go from there to the “Main” section, select the menu “Reset” and in it click on the item “Erase all content”.

This action will reset the Apple Watch to factory settings (all data will be deleted), and will also break the existing pairing with the iPhone.

How to disconnect the Apple Watch from the phone: detailed instructions

Apple Watch is a rather expensive wrist-type smart watch. Their high price is largely due to the fact that these watches have both a chic appearance and a large set of functions. However, among all gadgets of this type, the Apple Watch stands out not because of its functionality, but because of its stability. It’s also worth noting that the Apple Watch can only be connected to an iPhone running iOS operating system (connecting the Apple Watch to Android is currently impossible). However, in this article we will talk not about connecting the Apple Watch to the phone, but, on the contrary, about unlinking it from the mobile device. We will tell you why you need to detach the Smart Watch from iPhone, how to detach the Apple Watch without the phone, and provide detailed instructions on how to detach the Apple Watch from iPhone.

Preparing the Apple Watch for the move to a new iPhone

Logically speaking, all you have to do to connect your Smart Watch to a new device is simply do a reset of its settings, then pair it with the next smartphone. At least, that’s what happens in the Android Wear universe. In this case, you lose all the accumulated data, this is the reality of Android. In iOS, the process of transferring the Apple Watch involves saving all personal data, which is facilitated by a functional and easy backup system in iTunes.

apple, watch, another, iphone

We start by breaking the pairing between the old iPhone and the Apple Watch. This process will back up the data from the Smartwatch to the smartphone’s memory. To do so, open the Watch app on your iPhone, then select “Apple Watch → Sever Pair with Apple Watch” and confirm your decision, after which you may need to enter your Apple ID:

See also  How to unlock an account on your iPhone

The process is slow, takes up to a minute, and on the watch the action takes even longer, because after breaking the pair they are completely cleared of all content, that is, there is a complete reset.

After this step, all data from the Apple Watch will be saved to your iPhone. Now let’s proceed to the next, very important step.

How to perform the procedure with the Apple Watch

If you don’t have a smartphone nearby, you can do the deactivation from the watch itself.

Go to the Settings app.

Open General Reset and select Erase Content and Settings.

Enter your password and confirm the reset.

In a few minutes the watch will be reset to factory settings and all content will be deleted from it.

Compatibility between Apple Watch and iPhone

Engineers from Cupertino introduced the world to the first generation of smart watches relatively recently. in 2014, giving rise to a new trend in an already dense niche of mobile gadgets. There’s now a fourth generation of the device on sale, which Apple has named in its own way. the Series. Apple Watch has also developed its own operating system, watchOS, which is released with enviable regularity about once a year. However, the interface of the operating system is quite similar to iOS, except for the increased proportions of icons.

Among the useful features of the device there is an NFC chip, which previously was the prerogative of smartphones only. Now you can make contactless purchases with the watch via the proprietary Apple Pay technology.

However, the gadget is multifunctional, and, in addition to contactless payment and time tracking, is able to do many other things:

apple, watch, another, iphone
  • to send SMS-messages. And since it is impossible to place a keyboard on a small screen (it is possible, of course, with various tricks like scrolling, but using such a keyboard would be very uncomfortable), then another way out was found, no less innovative: typing through voice dictation. You can also use ready-made templates, simplifying the task;
  • answer incoming calls. This feature appeared in the 4th generation watch, when the device was equipped with a built-in speaker and microphone;
  • use Siri assistant. According to the manufacturer, the assistant has the rudiments of artificial intelligence. the more you will use the watch, the better it will understand your logic and predict your behavior, offering the best options for your actions;
  • fitness features allow you to track your wearer’s daily activity by measuring their heart rate and counting the number of steps taken and kilocalories consumed;
  • The watch even has a GPS tracker that allows you to use maps;
  • you can use the Apple Watch as a music player. 2 GB of memory is enough to store an extensive collection of music;
  • Finally, the watch has a severely reduced, but readable version of the mail client. Read letters can be deleted, but you can’t reply to them.
See also  How to block a hidden number on your iPhone

With the help of the wheel on the case you can perform a number of actions. to activate Apple Pay, to call the voice assistant Siri, to control the sound power, to take screenshots, to flip through the photos and images, to exit active applications.

apple, watch, another, iphone

As for compatibility, the first and second generation gadgets can work with smartphones no older than iPhone 5s (with iOS 11). Beginning with the Series 3, the watch has the ability to work with the built-in eSIM card, but in our country such technology has not yet been implemented by domestic operators.

Apple Watch Series 4 requires an iPhone 6 and newer versions. Currently, the Cupertinians are working on the development of a fifth-generation operating system. It is expected that it will be compatible with smartphones, starting with iOS 12.

An Apple tablet can also be synchronized with the Apple Watch, since the iPad functionality is almost identical to that of the iPhone. It is clear that the iPad is much larger than the phone, but sometimes there are situations when it will be useful for work with the Smart Watch. For example, when you’re already getting ready for bed, and you get a message on your tablet at the same time. There is no need to get up. you can read the message on your watch, unless, of course, you take it off overnight.

No, Apple has not allowed you to connect two iPhones/iPads to one Apple Watch at the same time, it is now impossible. This watch can only work with one of your devices: iPhone; iPad.

See also  How to clear system data on your iPhone

To untether your Apple Watch from your iPhone without the smartphone itself, you’ll need to do the following:

  • Go to the iCloud site.com and sign in with your Apple ID account.
  • Under Settings, locate the clock and click on it.
  • In the menu that opens, click the cross next to the watch and confirm the removal of the device.

How to tie a second Apple Watch to your iPhone

To pair your iPhone with multiple Apple Watch devices, do the following:

On your iPhone, open the Watch app and click on the “My Watch” tab.

At the top of the screen, click the All watches link button.

In the menu that appears, click on “Add Watch”.

Then follow the instructions for tethering the watch to your smartphone. They can be set up as a new independent device, or you can transfer a backup of a similar gadget to them.

Each new watch gets its own separate set of settings, allowing you to choose dials, programs, and previews for it. So, adding the card to Apple Pay and linking it to the watch, or installing the program there on other similar devices will not manifest itself in any way.

How to pair and unpair an Apple Watch and iPhone

  • On your computer, go to the iCloud website.com and log in with your Apple ID.
  • Open the “Find iPhone” application.
  • Click “All Devices” and select your Apple Watch.
  • Click “Erase Apple Watch.”.
  • Click the delete button next to your Apple Watch.

First, go to the iCloud site.com and sign in with your Apple ID. Then go to “Find iPhone“. There, you should select “All Devices” and then. in the list that appears. find the smartphone you want to unlink. Click “Erase iPhone,” then confirm your decision.