The universal way to “resuscitate” your iPhone or iPad tablet
If your iPhone or iPad tablet is charging but not turning on, use a simple sequence of actions that works for most models of the manufacturer, and will “resuscitate” the hanging device: hold down and simultaneously hold the “power” and “home” buttons for 10 to 20 seconds. As a result, the screen of the gadget should light up the apple logo, and continue to load the device.
These instructions are applicable to the following manufacturer’s gadgets:
- iPhone 2G;
- iPhone 3G;
- iPhone 3Gs;
- iPhone 4;
- iPhone 4s;
- iPhone 5;
- iPhone 5c;
- iPhone 5s;
- iPhone 6/6 Plus;
- iPhone 6s/6s Plus;
- iPhone SE;
- Any version of iPad tablet.
If the iPhone still does not turn on, the apple is lit and the screen goes out, most likely the error is more serious, hardware or software. In this case, either the charger or the phone battery must be changed. You can get it checked at a branded service center.
Why iPhone does not turn on or hangs?
If your iPhone is completely discharged, it will not turn on. Some background or other tasks may have drained your smartphone faster than you expected. Or maybe your iPhone runs out of power quickly due to a system bug and you didn’t even notice.
Let’s say you’ve figured out that your iPhone is really dead, and you’ve plugged it in to the charger. If it still does not turn on, it may be because your charger is defective. It’s worth checking.
Defective proximity sensor
It may surprise many people that a faulty proximity sensor can keep your smartphone from turning on. Learn more about this below.
There are other issues that can prevent your iPhone from turning on. This may be due to too low battery capacity, which does not have enough energy even to turn on the smartphone. In this case, you need to take your iPhone to the repair shop.
Now let’s talk about how you can solve your problem.
iPhone software failure
If there is an error in the iPhone software, then the device must be hard reset. To do this, on the iPhone at the same time are pressed keys: Power and Home. Press the buttons and hold them for about 10-15 seconds. Then on the display of the smartphone will appear the logo of the company Appel. This indicates that the gadget began to reboot.
Then, after rebooting, the device should start working normally. Note that it is desirable to do such a reset, when your iPhone hangs and stops responding to any button clicks (think of the computer and Windows, in this system when it hangs you must do the same).
I’ve listed the most standard errors and their solutions. But, when they don’t help, it’s possible that your device has some of the following problems:
- The network cable has become damaged;
- Your battery is broken;
- The jack the charger is plugged into is damaged;
- The malfunction during the firmware upgrade.
With each of these problems you need to contact a workshop, because you can not fix it by yourself, of course if you are not an expert.
Your PC is broken and you are unable to use it normally? No problem. Need to call our computer repair center. We will diagnose and repair your problem. It is important for us that your PC continues to work perfectly, so nothing distracts you from doing what you love: Our offer: 1 Free visit of a specialist; 2 Free analysis of the computer at your home; 3 We give a guarantee after repair, up to three years; 4 We issue a check with a warranty card. All you have to do is leave a request and we will give you a 15% discount
To sign up for a computer repair course, follow this link
How to turn on a new iPhone
Usually a new iPhone is in the box with 40-60% of its battery power turned off.
Of course, the device should be started up from a half turn, that is, after the normal start-up procedure, which is performed by pressing and holding (for a few seconds) the power button. The power button is located on the right side of all recent iPhones (iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone SE).
Due to a defective cable or the use of a non-original accessory, the phone may not start. After connecting the charger to the phone, check that it is working and actually charging. If the electrical signal is not supplied to the Lightning connector, a corresponding graphic notification will appear on the screen:
The save mode can be controlled via the battery save option. The appearance of the black screen is due to the inability to process the command, as in power-saving mode is significantly reduced. After the black screen appears the phone should be immediately connected to the power adapter and only after a full charge turn it on.
You can only deactivate the battery-saving option on a powered-up iPhone. If you disable the option in the settings, the device will stop shutting down at the last 20% of the remaining charge:
Deactivating the function will prevent arbitrary shutdowns of the device and significantly speed up the operation of such applications:
Remember that disabling the function leads to the fact that the gadget runs down 20%-30% faster, so you need to monitor the use of programs in the background mode and more often recharge your smartphone.
Why iPhone won’t turn on
Below we look at the main reasons why your iPhone won’t turn on.
Phone is low
The first thing to try is to push back on the fact that your phone won’t turn on because its battery is dead.
First, put your gadget on charge. After a few minutes an image should appear on the screen telling you that power is coming. Your iPhone does not turn on immediately. on average, it will do so within 10 minutes of charging.
Replace USB cable. This is especially important if you are not using the original cable or if the cable is severely damaged;
If you see an apple blinking, blue, or black screen for a long time during the phone startup phase, it may indicate a problem with the firmware. Fortunately, it is quite easy to solve.
- Connect the device to your computer with the original USB cable and run iTunes.
- Perform a forced reboot of your iPhone. How to do it was previously described on our site.
iPhone Not Turning On? Here’s The Fix!
Exposure to low or high temperatures negatively affects the operation of your iPhone.
If the phone was exposed to direct sunlight, for example, or was charging under a pillow with no access to cooling, it may have reacted by suddenly shutting down and displaying a message that the gadget needed cooling.
Problems with the battery
If you use your iPhone a lot, the average life expectancy of an original battery is 2 years. Of course, suddenly the device will not just turn off without the possibility of starting it. You will notice a gradual decrease in the operating time at the same level of load.
You can solve the problem in any authorized service center, where a specialist will replace the battery.
Exposure to Moisture
If you own an iPhone 6S or a younger model, then your gadget is completely immune to water. Unfortunately, even if you dropped your phone in water about a year ago, immediately dried it out, and it continued to work, the moisture got inside, and over time it will slowly but surely cover the internal elements with corrosion. After a while the device may not survive.
In this case, you should contact the service center: after conducting diagnostics, a specialist will be able to say exactly whether the phone can be repaired in general. It can be necessary to replace some elements in it.
Breakage of internal components
Statistics show that even with careful handling with Apple-gadget, the user is not insured against its sudden death, which can be caused by the failure of one of the internal components, such as the motherboard.
In this case, the phone will not respond to charging, connecting to a computer and pressing the power button. The only way out is to apply to the service center, where, after conducting a diagnosis, a specialist will be able to issue a verdict, what exactly has contributed to such an outcome. Unfortunately, if the phone warranty has expired, its repair can cost a lot of money.
We have considered the main reasons that can affect the fact that iPhone does not turn on. If you have already had a similar problem, share what exactly caused it, as well as what actions allowed to fix.
In addition to this article, there are 12,708 other instructions on the site. Add Lumpics site.ru to bookmark (CTRLD) and we will definitely still be of use to you.
Thank the author by sharing this article on social networks.
Repairing iTunes (data loss)
If the solution suggested in the previous part of the article proves ineffective, it means that there are more serious problems in the iOS. You can fix them with Tenorshare ReiBoot’s “Deep Repair” feature, but it’s important to keep in mind that this will result in the loss of all personal data stored in iPhone memory.
Repeat steps.2 of the previous instructions, but this time mark the second tile and click the “Deep Repair” button.
All the data and settings will be erased, so the phone will need to be set up as a new one by logging into your Apple ID.
What to do if your new Apple iPhone XR doesn’t turn on? [Troubleshooting Guide]
Apple recently unveiled three powerful, modern smartphones called the iPhone XS, iPhone XS Max and iPhone XR. These are by far the most expensive iPhones ever released by the Cupertino giant. These new iPhones come with iOS 12 as a pre-installed platform, so users can expect more advanced features and functionality. When it comes to hardware perspective, they are also impressive. But none of this guarantees a completely flawless and problem-free iPhone experience. System problems can occur on any mobile device at any time. And the new, powerful and rugged iPhones are no exception.
While these problems rarely occur with new devices, there are many factors that can cause them. But the upside is that most of these problems are due to software bugs, which means they can be fixed with some workarounds. This post discusses one of the scariest problems that can also occur on new iPhones. Read on to find out what to do when you encounter an unexpected problem that causes your new iPhone XR to suddenly refuse to turn on.
Before you go any further, if you found this message because you were trying to find a solution to your problem, try visiting our troubleshooting page, as we’ve already covered most of the common problems with your phone. We’ve already provided solutions to some of the problems our readers have reported, so try to find problems that are similar to yours and use our suggested solutions. If these don’t work for you, and if you need more help, fill out our iPhone questionnaire and click “Submit”.
Why won’t your iPhone turn on?
We’re sure you’ve already tried pressing the power button several times. Still can’t see the Apple logo on your phone screen? Well, here are a few possible reasons why your iPhone does not turn on.
Battery failure is one of the most common reasons why your iPhone hangs on a black screen. So, up to this point, your device has been showing signs of overheating or failure? As Apple’s batteries age and prolonged use, your iPhone’s battery becomes less efficient. When your iPhone’s battery starts to drain, it can lead to several other problems, such as unexpected shutdowns, black screen issues when your iPhone won’t turn on, and t. д.
Running your iPhone with an outdated version of software or not updating apps can also lead to serious problems if your device doesn’t reboot. Hence, it is also recommended to update the OS regularly so that your iPhone runs on the latest version of iOS for smooth operation.
Another common reason why your iPhone won’t turn on is physical damage or water damage. If you are using an iPhone model that is not waterproof and unfortunately, contact of your device with water or any other liquid may cause damage to internal components. If you drop your phone in water, pool or sink by mistake, your iPhone may stop responding.