iPhone is locked connect to iTunes how to unlock

Ways to fix iPhone disconnected Connect to iTunes (including iOS 14)

My iPhone says disconnected connection to iTunes, so iPhone disconnected connect to iTunes, how to fix?

If you receive the message “iPhone disconnected. Connect to iTunes”, you need to take action immediately. This means that your iPhone is locked and disconnected by Apple forever. If you enter the wrong password within 5 attempts, you will receive the “iPhone disconnected. Try again in 1 minute. So after various unsuccessful attempts, you may get the following pop-ups.

  • iPhone is disconnected. Try again in 5 minutes. Enter 7 incorrect access codes in a row.
  • iPhone disconnected. Try again in 15 minutes. Enter 8 incorrect access codes in a row.
  • iPhone disconnected. Try again after 60 minutes. Enter 9 incorrect access codes in a row.
  • iPhone disconnected. Connect to iTunes. Enter 10 incorrect passcodes in a row

Your iPhone is locked after too many times entering the wrong password. Is it true that a disconnected iPhone can prevent others from stealing your personal information. But it’s also a disaster when you forget your iPhone password and get disconnected. To get iPhone out of disabled mode, you can do as shown in the following paragraphs. Get into your iPhone.

Unlock iPhone via iCloud.com

One of the most widely used methods for disabling your iPhone without fixing iTunes is Apple’s “Find My iPhone” feature. If you remember your Apple ID and passcode, and Find My iPhone is enabled on your device. It allows you to track your device, as well as perform some remote manipulations with it, including wiping all information from the device. In order to unlock iPhone without a password, you need to:

Press “Erase iPhone” or “Erase iPad”.

Method : Unlock the lock via iTunes

After 10 tries, your phone reports that it’s locked and asks to connect to iTunes. Well, we will have to listen to it and start the recovery.

However, it is important to remember here that if you remove the password this way, there will be a total loss of data from the phone. To do this, clever manufacturers have come up with a regular backup that returns all the archives. So, how to unlock your iPhone via iTunes? Here are the step by step instructions.

iphone, locked, connect, itunes, unlock

iPhone is Disabled Connect To iTunes. How To Unlock Disable iPhone Without iTunes Or Pc [New 2022]

  • 1. Open the program. If you don’t have one, find it on the official website.
  • 2. Connect to your computer using the cable.
  • 3. Enter recovery mode

iPhone is disabled connect to iTunes. how to open without data save itunes

Remove password on iPhone X or later models, iPhone SE (2nd generation), iPhone 8 and iPhone 8 Plus

Without connecting iPhone to the computer (laptop), press and hold the side button and one of the volume buttons until the “Turn off” slider appears. Move the slider to turn off your iPhone. Hold down the side button and connect your iPhone to your computer. Hold down the side button until the recovery mode screen appears.

Remove password on iPhone 7 and iPhone 7 Plus

Without connecting the device to your computer (laptop), press and hold the side button until the “Turn off” slider appears. Move the slider to power off your iPhone. While holding down the volume down button, connect your iPhone to your computer. Hold down the volume down button until the recovery mode screen appears.

Also, without connecting your iPhone to your computer, press and hold the side button until the “Turn off” slider appears. Move the slider to turn off your device. Hold down the “Home” button and connect your iPhone to your computer. Do not release the home button until the recovery mode screen appears.

Activate the iTunes program, your device will appear in the upper left corner. A dialog box will pop up where you should select RESTORE.

If when connecting to a PC, your phone gives an error and does not allow you to connect to the program, there are several reasons for that:

cable or port malfunction; old iTunes version that needs to be updated; software conflict; it is better to use a different PC.

This method is a proven and working, but has a significant disadvantage: if the iPhone is disabled, it is impossible to connect to iTunes and recover the password without losing data.

iPhone is Disabled, Connect to iTunes? 3 Ways to Unlock It!

iPhone is disconnected. Connect to iTunes which means

In fact, the reason this error occurs is quite simple and primitive. If your smartphone says: “iPhone disconnected. Connect to iTunes”, this indicates that you have repeatedly entered the password code in error, and now you will need a third-party utility to unlock the device. In fact, you can cope with iTunes, but it is not so convenient.

See also  How much longer will the iPhone 7 be updated

If you enter your password 10 times wrong, iPhone locks up

Don’t think Cupertino is a fiend. This error doesn’t happen right away. over, its appearance is, in fact, already the final level. It means you entered the wrong password 10 or more times. Because after 5 mistakes, the iPhone will lock for just a minute and you will have the possibility to unlock it. But after 10 times you will not be able to unlock it.

over, any attempts to reset the password and get your iPhone back to work will lead to the fact that all the data from its memory will be permanently and irrevocably erased. You will get a perfectly working but empty smartphone. So in this case it is better to have a backup copy that you will be able to roll up after the recovery. So don’t neglect it.

How to connect a locked iPhone to iTunes?

If you are the lucky owner of an iPhone or iPad, then of course you will do everything to protect your device. The developers from Apple have built in many ways to do this and one of these ways is setting a password on the lock screen. And it’s by using this lock that you may sooner or later see “iPhone disconnected, connect to iTunes”.

Causes of the error

It’s as simple as that. If you mistyped your password a few times while trying to unlock the screen, the device will first give you a temporary warning, then completely locks your iPhone. This is done, of course, for security purposes, so that an attacker can not turn on your device just by picking up the password by trial and error. But sometimes you can make a mistake yourself, forgetting your password, or letting your children loose on your phone and unknowingly leading your device to this lock.

This kind of lockout can happen due to carelessness

There is a way to solve this problem and even more than one.

“Device disconnected, connect iTunes” solve the problem via iTunes

This way will help you save files on your phone, but require you to remember the password from the locked device. It’s really useful if you know the password and it’s not your fault that you got locked out. Do the following steps:

This and the following solutions work for any version of your iPhone, iPad, and iPod touch.

Unfortunately, this method only works if your Windows or MacOS computer is already tethered to your iPhone. If the tethered device does not exist, iTunes will first ask if you want to give access to that computer, and then it will ask you to confirm it directly from the phone screen.

If you see this window, you will not be able to recover your device this way

You can not give this confirmation, of course. However, for such cases there are other ways to solve this problem.

iphone, locked, connect, itunes, unlock

Restore from device backup

If you were prudent and backed up your device from time to time, it’s time to praise yourself for it. Because while rolling back to a backup will deprive you of some of the data that was already created after getting a copy of the device, most of the data should stay with you. If you are satisfied with the state of the copy, then you should proceed to restoring your iPhone from the backup. We’ll take a look at restoring from backup via iTunes, although there are other ways to do it:

If your copy is also password-protected, or if this method has failed for some other reason, all you have to do is reset your device with a complete deletion of all data.

Full reset of your iPhone, iPad, or iPod Touch

If you use this method, you will lose all the data on your iPhone.

If it comes to this method, it means that the previous ones did not help you and you have no choice. Fortunately, there is a special program that can help you reduce your losses at least a little bit. So, the program iFunbox will help you to drop some multimedia files (photos, videos) from your device, even if you don’t have access to it.

After all the files that can be saved have been saved, do the following:

You may have to turn off the “Find my iPhone” function in iTunes in order to recover your device. You can do this by going to iCloud and signing in to your account.

How to avoid such a blockage in the future

To avoid getting in a similar situation in the future, or to make solving this problem easier, just follow a few simple rules:

  • Do not forget your password. After all, any such lock is necessary so that you and only you can access your device. That’s why it is crucial to remember the password you have created for the lock.
  • Keep strangers and small children away from your device. Apple devices are expensive, and locking your device because of an incorrect password is not the worst thing that can happen to your device if you are not careful.
  • Make backups on a regular basis. It will help you not to lose your data.
  • Connect your device to your computer with iTunes installed, even if you don’t need to. This will give you more options when you lose access to your device.

Now you know what to do if your iPhone, iPad, or iPod touch displays a lock message and asks to connect to iTunes. And although everyone can get in this situation, only you can make it so that from a minor trouble it does not become a big problem.

Often there are cases where the Apple iPad is blocked because you have forgotten the password to access it. It does not matter what model your iPad is, it is important to remember the combination of numbers or characters. In this case, you will have five attempts to enter the correct password, and on the sixth time the tablet will be locked for one minute.

See also  How to make instagram like on an iPhone

Then you will have another opportunity to enter variations of the password, and on the ninth time the iPad will lock for one hour. After an hour, you will again have the opportunity to remember and enter the correct unlock characters, if you can not enter these options correctly, too, the iPad will lock access to it and prompt you to go to the iTunes program.

So don’t be promiscuous and don’t enter the same password more than once, don’t use your options in vain. It is desirable to remember the password, and the restoring of iPad is needed only in extreme case, when the unlocking fails and there is no hope.

It is very important when working with iPad to periodically synchronize it with iTunes or cloud iCloud, thus keeping a backup of data from iPad. Then in the case of such a lock you will be able to restore it to factory settings without unnecessary worry, and then restore all the data on the iPad from the backup.

In this article we will try to help you and tell you how to unlock iPad through iTunes. When the iPad is disconnected, then connect to iTunes, how to unlock all the data? You ask.

Unlock via iTunes

Very easy. Connect your computer with iTunes to a turned off and locked iPad using a USB cable. Keep in mind that the version of iTunes must be the latest, otherwise the recovery may not go and give the program error, which you will have to fix for a long and painful.

The connection of two devices will synchronize the data and create a backup. After the synchronization process, go to the “Restore iPad” step by activating the appropriate button. When iTunes starts up, it will offer you the initial settings, where you need to open the “Restore from iTunes copy” option by clicking on it. Next, search iTunes for the latest version of the backup data from the iPad, judging by the date of its creation, and complete the initiated data recovery process.

If iTunes prompts you to enter the iPad password when performing the above process, first locate the device with which you previously synced the iPad so that it does not ask for the password to unlock the iPad and then use it to restore the iPad from backup through iTunes.

How to Unlock iPad with Find iPad

At this stage, it is important to know the Apple ID password, without which this process is not possible. This process is likely if you’ve previously registered your ID for any device with Apple. From then on, you’re completely safe. Wherever you are, knowing the secret registration code, you will be able through any Apple device to enter Support, use “Find iPad” service and perform any actions with it: lock it, erase iPhone, restore access, connect and perform other necessary and important operations.

How to restore access via iCloud storage

Let’s look at how to do it through the iCloud app. Connect to a WI-FI network or use 3G or 4G connection. Make sure locked iPad is also powered on and online. Log in to iCloud with your password and find the “All Devices” section, where you click on the designated iPad. At the top right corner you will see an option “Erase iPad”, click on it. This will erase all information on your tablet. After that, set up your iPad as new or you can restore all the data from the device’s last backup.

If none of the suggested methods suits you for various reasons, try a tougher but effective way to recover your data when the iPad is locked. You don’t need an internet connection to do this, but you will need iTunes and your computer again.

How to use iPad recovery mode

Connect your computer with the latest version of iTunes to the locked tablet using a USB cable. Turn on the iTunes program on your computer. When you’re ready, restart your iPad: press the two buttons together “Home” and “Sleep/Wake”

That is, the iTunes program will offer you a choice of two actions: “Restore” and “Update” the iPad. You press the “Restore” button and the iPad will start the recovery mode, after which all data will be erased, including the forgotten password. An unlocked iPad will connect like a new one. If you have a backup of your data, you can restore all the data from it by running the appropriate command through iTunes on iPad.

Modern gadgets implement many approaches to protect personal information. Apple products are no exception. And even if the attempt to gain unauthorized access fails, the owner of the device will be the first to suffer. So, “iPhone disabled, connect to iTunes“: how to unlock and where to start?

Causes of occurrence

At this moment there are no registered cases of such problem due to software errors. This means that person from your environment is the culprit. For example, a colleague at work wanted to overwrite an important contact in his phone book or a jealous wife was trying to find evidence of adultery. But in most cases the culprit is children, whose curiosity sometimes borders on sabotage.

It is worth noting that the seventh version of iOS, after entering six incorrect combinations, you can try to enter the password again in one minute, after nine attempts the smartphone will shut down for an hour, and after ten attempts the screen will show the message “iPhone disconnected, connect to iTunes”.

See also  How to connect Action Camera as a web camera

Attention! Depending on the OS version, the locking time of the device may increase.

How to fix?

Fortunately, such a problem is easily solved. There are a number of ways to do this.

Resetting the Retry Count

The essence of this option is to connect the iPhone to the PC and then synchronize it. It will let the system know that the device is in the owner’s possession and will reset the counter. To do this you will need to:

Warning! Only connect the device to a PC that has already synchronized with the device. Otherwise it may not work.

If this option does not help you go to the next option.

Recover from backup copy

This method is ideal if you regularly create backups in iTunes and if you did not have a password on your device. This method is also suitable when you remember your previous password, set at the time of backup.

If you do not have a copy or it is also password-protected. the radical variant is left.

Zeroing iPhone

Here the name of this option speaks for itself. To completely reset your iPhone via iTunes, you need to do the following:

The end of the process will mark a complete restart of the device.

Attention! Use this way only in extreme cases. All data will be deleted from the phone!

Enter the recovery mode on your iPhone 6s or earlier or iPad

Turn off your iPhone, iPod touch or iPad if it’s not already turned off. Press and hold the power button on the right side (iPhone 6 or later) or the top (all other iPhones, iPods, and iPads) for 3 seconds.

Swipe the screen slide to the shutdown confirmation slide to the right.

Press and hold the Home button on your iPhone, iPod touch, or iPhone. Connect your iPhone, iPod touch, or iPad to your computer and make sure iTunes is running. Release the Home button when you see the iTunes connection screen.

Reset the try counter

In some cases, when the machine tells you to connect to iTunes to unlock your iPhone, just follow this tip. If simply connecting to your computer with iTunes is not enough, try starting the syncing procedure. You do not need to complete the process, you can stop it with a cross or an arrow if it appears. After that, try to enter the device password again.

Important! Before you connect to iTunes if your iPhone is locked, make sure it’s the same PC that you already connected from. Otherwise, the program will ask for confirmation from the device.

How to unlock a disconnected iPhone / iPad using iTunes

When you see the message “iPhone is disconnected, connect to iTunes”. As the post says, you can use iTunes to unlock your iPhone password, but make sure you’ve previously synced your locked iPhone / iPad with iTunes. This is a simple guide to bypass a disconnected iPhone via iTunes: Connect your disconnected iPhone or iPad to your computer via an Apple USB cable. Then start iTunes, and iTunes will appear as soon as possible.

To log into your locked iPhone, click the “Phone” icon on the left and it will display your iPhone information, then click “Summary” “Restore iPhone”.

If iTunes asks if you want to back up your settings, select “Backup”.

Click the “Restore” button again and wait for the restore to complete. After you restore all the data on your iPhone has been erased, including the screen access code, and you will see that your iPhone is in the Hello.

What does it mean when iPhone is disconnected?

This always means one thing. iPhone is locked after you mistyped your password to protect yourself from possible hacking attempts.

  • You made a mistake entering your password several times in a row.
  • A child locking your iPhone is one of the most common cases. As soon as the phone falls into the small hands, they immediately begin to poke their fingers at the screen, which leads to the shutdown of the smartphone.
  • The device may try to unlock itself while lying in a A light tap on the screen is enough to turn it on. The same accidental touches are used to enter the code.
  • Someone purposely picked the passcode while the smartphone was out of your sight.

Apple takes steps to protect users’ personal data. One of them is to lock the device after several incorrect password attempts to prevent it from being bypassed by trying combinations of digits.

This hacking method is called Bruteforce, which translates to. To prevent this method of iPhone hacking, iOS intentionally limits the number of attempts.

This will display the message “iPhone is disconnected, try again in 1 minute.

  • 5 incorrect password attempts in a row. disabling for 1 minute.
  • 7 incorrect attempts in a row. try again after 5 minutes.
  • After 8 attempts in a row, you will see the message “iPhone is disabled, try again in 15 minutes.
  • 9 consecutive attempts. lockout for 60 minutes.
  • Entering an incorrect password 10 times completely locks your phone, showing “iPhone disconnected: try again in 1 minute” (to unlock your device, see below for details).

Don’t get to 10 times, it’s better to wait until the timer resets and try to enter the code again. This is easier than resuscitating a locked device.

If you can’t remember the passcode, you’ll have to erase all the data from your phone, including the settings. If you haven’t backed up your data through iCloud or iTunes, it will be lost.