Pantum printer does not print from a computer. Problems in the operating system itself

Printer is a device for printing digital data. Today, almost everyone has such an apparatus at home. Distinguish a lot of various models. They are divided both on the principle of printing (laser, jet, matrix) and in functionality (photo printing, support for various formats, preliminary processing, bilateral printing).

No matter how modern your device is, everyone can face problems. Many of them can be solved independently without contacting Support, especially if a program error.

The printer gives an error

There are several reasons for the occurrence of errors associated with the printer or seal, they can be divided into two categories.

    Each modern printer has a special program, except for the driver that facilitates work with it. Sometimes, if it is installed incorrectly or deleted, printing to print is not possible, even if the driver itself remains. In this case, when trying to send one or more files you can see a system message;

The second reason for the occurrence of errors is hardware, which are associated directly with the device itself, such as:

    The printer periodically turns off or gives a mistake, which can work faster (the problem can be caused by the USB port connecting the cord or driver);

In fact, there are much more system messages from a modern printer. But everyone, one way or another, is associated with the gas station refueling/replacing the cartridge or stuck paper, as well as overheating.

Most problems with a non.working cartridge arise after its refueling, since many of them have protection against the manufacturer in the form of special counters and sensors.

The reasons

Because of what the Pantum M6550NW printer does not print, the red diode blinks, although there is a paint?

  • Basically, the problem is that Windows puts the documents in the queue for printing and nothing happens. Often this happens when there was no long reinstalling the operating system or it is “littered” or whether it is a regular software glitch that is solved by the usual reboot.
  • The paper jammed or not, it is very easy to understand visually.
  • Relevant for a jet printer. if you transported or transferred the printer, check whether the ink supply system has been transferred from the transportation.
  • If the paint is running out or not, it can come out a clean or non.printed sheet, while the printing process will go.

Solution

Most problems can be solved by installing a patch under Windows.

The printer does not print all colors

First of all, check the level of paint, and the reasons may be as follows:

  • Perhaps the paint of certain colors has ended.
  • With a simple couple of weeks, the paint could dry out.
  • The inkwer of one of the colors can be transmitted to understand this, you need to disassemble the printer.
  • Perhaps the air entered the ink system.

Does not print office documents and pictures

Another mass problem, mainly happens with:

Does not print a network printer

Find out the IP address of the network printer through properties to check its availability, then press Winr and enter CMD, this action will cause the console, write in it Ping “Here IP of your printer” without quotes. If he kicks, then everything is in order. If not, check the integrity of the Ethernet cable going to the printer from the computer / router or print server, try to replace it.

If this does not help, the reason is probably described above. In this case, it will be best to contact a system administrator.

Hanging the printing process

There can be many documents in the queue for printing that cannot be sent to the printer. To verify whether there are dependent documents, we move on to the subcategory “Devices and Prinaters” in the control panel, open the menu of the connected equipment, and select “View the Printing Establishment”. Cancel the seal of all documents, and start the process again.

How to Fix Printer Issues in Windows 11

Before climbing deep into system settings, it is necessary to make sure that the printer itself is in good condition and does not show any error on the display. The causes of a malfunction may be a trim of paper, empty cartridges and other problems, the solution of which manufacturers describe in the guide for use. In some cases, it is enough to completely pull out the USB cable and insert it back.

Eliminate problems with the printer when he does not answer or does not work

From this article you will learn why there are situations when the printer does not print from a computer or laptop, even if it is connected and previously worked without problems. These instructions are applicable if: it was not possible to print in Windows 10 or more old 7 and 8, which are still actively used, work with any model of Canon, HP Epson, Brother, Samsung, Ricoh. Personally, I “cured” a lot of HP series Laserjet, several Samsung SCX4200, Canon LBP 2900 and MP 250, Epson L355 and L800, Ricoh SP100 SU and 111, Pantum 2207 and many more that I can no longer remember.

From my own practice I know that the PC can see the device, write Ready to Print (ready for printing), sends to tasks and displays a trial page, but the printer still does not want to work with other documents. The problem is relevant for the local and network type of connection. If the second option is used, then to fix the device, you should apply some additional actions.

How To Fix Windows Cannot Print Due To A Problem With The Current Printer Setup Microsoft Word Error

I will tell you what to do in cases if the printer or All-in-One Printer has stopped printing documents and: does not answer or does not work, gives an error “an unforeseen problem with the configuration” or another similar arose, does not respond to commands, stops during the process. just drives the paper, prints not what you need, does not make several copies. Separately, we consider the option when the technique does not turn on at all.

Check the presence of a printer in the list of devices

If the technique is correctly installed, then there must be present in the list of system devices. To check this, you should go to the corresponding section of the control panel. This can be done quickly: click the Windowsr at the same time, enter Control Printers, look for our model in the list. If the device is absent, then it is simply not installed on the PC properly.

The reasons

Because of what the Pantum M6800FDW printer does not print, the red diode flashes, although there is a paint?

  • Basically, the problem is that Windows puts the documents in the queue for printing and nothing happens. Often this happens when there was no long reinstalling the operating system or it is “littered” or whether it is a regular software glitch that is solved by the usual reboot.
  • The paper jammed, there is no paper in the tray. here everything is clear we will not linger at this point.
  • Relevant for a jet printer. if you transported or transferred the printer, check whether the ink supply system has been transferred from the transportation.
  • If the paint is running out or not, it can come out a clean or non.printed sheet, while the printing process will go.

Universal solution to the problem with the printer

Most problems can be solved by installing a patch under Windows.

The printer does not print all colors

First look at how much paint is left, if this is already done:

  • Perhaps the paint of certain colors has ended.
  • One of the minuses of the jet printer that the paint could dry out if it was not printed on it for about two weeks.
  • The ink train is transmitted in a certain color, it is easy to understand by dismantling the printer.
  • Perhaps the air entered the ink system.

Does not print office documents and pictures

This is another common problem that occurs mainly with:

Does not print a network printer

Find out the IP address of the network printer through properties to check its availability, then press Winr and enter CMD, this action will cause the console, write in it Ping “Here IP of your printer” without quotes. If he kicks, then everything is in order. If not, check the integrity of the Ethernet cable going to the printer from the computer / router or print server, try to replace it.

If this does not help, the reason is probably described above. In this case, it will be best to contact a system administrator.

The reasons

Because of what the Pantum P2200 printer does not print, the red diode flashes, although there is paint?

  • Basically, the problem is that Windows puts the documents in the queue for printing and nothing happens. Often this happens when there was no long reinstalling the operating system or it is “littered” or whether it is a regular software glitch that is solved by the usual reboot.
  • The paper jammed or not, it is very easy to understand visually.
  • Relevant for a jet printer. if you transported or transferred the printer, check whether the ink supply system has been transferred from the transportation.
  • If the paint ends, then a pale or empty sheet can get out, but the printing process will occur.

Solution

Most problems can be solved by installing a patch under Windows.

The printer does not print all colors

First of all, check the level of paint, and the reasons may be as follows:

  • First you need to check if there is a paint you need flowers.
  • One of the minuses of the jet printer that the paint could dry out if it was not printed on it for about two weeks.
  • The inkwer of one of the colors can be transmitted to understand this, you need to disassemble the printer.
  • Perhaps the air entered the ink system.

Does not print office documents and pictures

Another mass problem, mainly happens with:

Does not print a network printer

Find out the IP address of the network printer through properties to check its availability, then press Winr and enter CMD, this action will cause the console, write in it Ping “Here IP of your printer” without quotes. If he kicks, then everything is in order. If not, check the integrity of the Ethernet cable going to the printer from the computer / router or print server, try to replace it.

pantum, printer, does, print, computer

If this does not help, the reason is probably described above. In this case, it will be best to contact a system administrator.

Why is it not a seal

There can be a lot of answers to this question, I will try to make a small check of the sheet on which you can find, what suits you.

  • You have survived the press service (spool). The frequent problem in Windows family operating systems is satisfied, and everything was decided by the restarting of the right service.
  • The turn of the print was clogged. Each printer has a certain amount of memory, and if you send a document too thick for it, then it can freely freeze, it is treated that you need to cancel the current print and clean the queue, more on this below
  • Your printer works in monopoly mode
  • Printer printing is temporarily suspended
  • The problem with the drivers
  • Problem with the device itself

An algorithm of actions if the print is not given to the printer

And so why the seal does not go to the printer, I described you, let’s now make an algorithm of action.

  • Since the devices can hang for a number of reasons, up to a buggy firmware, the first effective advice is the reloading of the device, it is done simply or on the printer itself there is an on/off button, or you just pull out a black power cord for a few seconds.
  • If after rebooting the printer nothing happened, then we try to restart the service, as is done look at the link above.
  • If the restart did not help check if you have local printing restrictions, for this, go to the control panel to the “Device and Printer” tab.

Click your right click on the desired printer, note that your printer does not have a ghostly label, as in my screenshot, here you can immediately understand that it does not go to the printer in the view of its autonomous work. In the context menu, select the “Printing Queue” item and on the “Printer” menu tab, make sure that two jackdaws are not installed:

If they are installed, then you will not be able to send documents for printing, they will hang in line, but nothing will go further.

Please note that as soon as the printer ceased to be in autonomous work, he immediately changed the label to normal color, this means that it became a worker.

Further, I advise you to clean the entire print line and try to send the document from the computer to print.

If this did not help, then I advise you to diagnose its built.in means, I already wrote about this method in the article when the printer did not work in Windows 10.

Reinstalling the drivers, such actions may be required when, for example, you have updated your Windows 10 for a new release, and in it your printer may not be supported or demanding the reinstall of drivers.

Another saving sticks, when the document does not go to the printer, is the use of the Print-Spooler-Repair-Tool utility, which automatically will conduct a deep diagnosis of your system and try to fix all possible problems with the seal. Open the utility, preferably on behalf of the administrator so that Windows UAC does not work. Press the “Repair” button for diagnosis

The process of detecting and eliminating problems takes about a minute. The utility itself will do everything.

From the additional, try to disable the “SNMP state is allowed”.

What printers did I observe this glitch on

The diagnostic algorithm is reduced to these points:

  • Firstly, if you find the inaccessibility of the printer in the seal control console, then first check network availability, for example, through a web-intese or ping. If your device answers, then we go to the second point
  • As they say, seven troubles are one reset, try to restart your printer, pull out a supply cord from it for 20 seconds and stick back. The device is loading in a minute (I already painted everything in detail in the article when I did not print the printer, do not be too lazy to read). Then we check its status on the server. If it did not help, then we try the next method.
  • There is a long.known problem on printing devices and it is associated with the SNMP protocol. The Windows 7 and higher operating system is automatically trying to interview the network printer on the SNMP protocol, this is done in order to determine whether there is a problem on the printing device or not. All modern printers have such a functionality, and if your print server for some reason could not get an answer from your printer, then it will give it to the management console disconnected, although it will be available.

In order to check whether this is the cause of the malfunction, you need to take such steps. Open the seal control and go to the properties of the desired printer.

Next, select the right port and click the “Configure Port” button. In the “Settings of the standard monitor of the port/IP“ TCP “Stand”, Remove the Galka “SNMP state,” and save the settings.

In the English version, select “Confirure Port. Snmp Status Enabled “

After all these actions, your printer status is disabled, will change to “ready or ready”. Please note that before the settings I had 40 tasks in the Print queue.

After half a minute, the tasks began to go to print, as can be seen 37. Congratulations we deduced our printer from Offline mode.

  • If the SNMP shutdown did not help you and your printer is disconnected again, although it is available, try to restart the press service (spool), but keep in mind that this will affect all print devices, they will not be available at the time of the restart.
  • If this did not help, then try to disable data from your device, in some cases it can give an effect.
  • Another of the options will be reclaimed by the seal port, as described on the link on the left, it sometimes helps when your offline printer is available, but is available on the network.
  • You can also use the tool diagnostics from Microsoft (Print Spooler Cleanup Diagnostic Tool)
  • If there is a conflict, between several drivers of two printers or more, then the isolation of the print driver will help you.
  • Be sure to check your firewalls and network devices if they block SNMP traffic
  • On some models of printers, it helps manually set the name at SNMP “Public”
  • Make sure that your autonomous work or suspension mode has not been set on your printers, although you would have seen it in statuses, but just in case
  • Try to diagnose Print-Spoler-Repair-Tool with a utility
  • Windows registry editing, you need to add an additional key on your print server. To do this, open the Windows registry editor and go to the branch:

And create a new Dword key and the name Snmplegacy and value 1.

  • If you still have a “disabled” status on the printer, then you, something with karma, try to use branded utilities from the manufacturer, for example, HP is HP Print and Scan Doctor, the main thing is not to give up.

I think you now know how to turn on the printer with the status disconnected (offline). If you know any more methods for correcting this error, then write in the Комментарии и мнения владельцев, I will add them to the article. Site material Pyatilistnik.Org.

Using specialized utilities

In Windows 10, the printer may not work for a number of reasons, another method to correct the situation, this is to use branded utilities from manufacturers, I will give an example from HP. He has a utility HP Print and Scan Doctor. You can download HP Print and Scan Doctor by link from below:

Launch the HP Print and Scan Doctor utility. She has a very simple algorithm. At the first step, she is looking for installed printers, and on the second it eliminates the reason why he does not work in your Windows 10.

This is how the process of scanning the operating system for the presence of printers looks like this.

This is how the Windows 10 network printer is simply set up and when Windows 10 does not see the HP printer. I found HP Laserjet 400 in my system, I choose it.

After looking for problems, you are given a solution to your problem, why the printer does not work in Windows 10. Next, we do what the HP Print and Scan Doctor diagnostic master say.

OKI’s company is called BRMAINTE, it can be downloaded from the link:

Epson has an Epson state diagnostic utility

Disconnect SNMP

In some cases when the printer is connected via Wi-Fi or LAN network, you may not go from the computer from the printer network traffic from the printer, which is why it may not be unavailable. Solution is to disconnect SNMP verification.

On September 26, Microsoft released the next update with the KB4517211 code, it repaired the sound, but the print manager broke, so if you don’t work the printer on Windows 10, then check if you have a KB4517211 update and remove it and remove it. Symptoms can be dependent tasks or canceled by the system itself. The deadlines of the patch are not known yet. Site material Pyatilistnik.Org

pantum, printer, does, print, computer