Protective blocking iPhone XR What to do. What is “activation lock”

Apple iPhone XR. a new budget replacement for the “founder” of generation from the sale. In the process of creating this device, the manufacturer went to a number of compromises, including a decrease in the native resolution of the screen and reduce the amount of RAM to 3 gigabytes. At the same time, the Bionic A12 chipset and the camera were still on top, despite the lack of additional modules, like the XS and XS Max.

Given all of the above, the device is impressive in comparison with all its predecessors. At the same time, he perfectly holds the charge, even despite the lag behind the “older brothers” in terms of energy intensity. In addition, it is only ~ 250 mA/h. 2942 in XR versus 3174 in XS Max.

In general, Apple turned out to be a very worthy device that occupied his niche. The only problem of the iPhone XR is exclusively in the glass case. IP67 protection from water and dust, of course, is useful, but it does not make the device stronger and does not give resistance to scratches and chips, even given the hardness of glass 5H.

In addition, the display repair, for example, at the best outcome, will cost about a third of the total cost of this premium girl. And this is what makes it necessary at least the installation of hardened glass on the display, since the scratches on the case can still be survived, especially if it is light.

Fortunately for the owners of “glass” devices, which include the iPhone XR, manufacturers of accessories have long created all kinds of protection options. Therefore, today for him you can calmly and without fuss even choose a whole set of hardened glasses, the installation of which will not affect the appearance.

The most common option, however, is the fortified glass of Full Screen format, developing ideas 5D and 9D glasses. In fact, this option differs from ordinary protection on the display only in that its edges go beyond the boundaries of the frame and the front panel, and the adhesive layer covers these very edges.

The main area of ​​such hardened glass is covered with a special composition, which prevents air entering the surface and reduces the voltage of the main glass. Thus, FullScreen Provision minimizes the risk of damage during strikes, including end or corner.

The less common but more complex method of protecting the fragile iPhone XR case is the installation of “second skin” in the form of hardened glass of the Full Body type. Unlike Full Screen, this type of protective glass covers not only the front panel and the ends of the device, but also its back cover. This provides protection against strokes and scratches on the maximum possible area of ​​the corps.

Finding and buying a protective glass for the iPhone XR is easy. They are sold in any store with accessories, including on the Internet. For example, you can go to Macincase-on this site there are all form factors of protective glasses of various strength. At the same time, it is advisable to focus on the hardness of the glass of at least 9n, since less solid hardened glass does not provide the proper level of protection.

Protective accessories in their history have not undergone many changes, and all of them concerned exclusively improving their properties. Therefore, modern protective glasses practically do not affect the working capacity of the device, the color rendering of the display or the response of the sensor, contrary to the common opinion on this subject.

If for some reason you dropped your iPhone XR, then the first thing it is to be examined for damage. Sometimes happy moments happen, and even after falling on the asphalt, there is no scratch left on the expensive device. But not a single smartphone is safe from failure of internal components due to a sharp shake or blow. To make sure that nothing happened to the iPhone XR, after the examination, you need to check the following:

  • Turning on and off.
  • SIM card recognition and signal reception level.
  • Buttons press.
  • The sensor reaction over the entire display surface.
  • Image quality.
  • Search for Wi-Fi network.
  • Quality of call and high.connection.
  • Recognition and performance of the headset.
  • The performance of front and rear cameras.
  • Reaction to charging, charging and discharge rate.
  • Heating level during operation.

If all the stages of diagnosis are passed normally, then you can calmly exhale. your iPhone XR was not injured when falling. And if this is true, then you need to think about buying additional protection so as not to subject yourself and your device to stress. You can find everything you need to ensure the safety of the iPhone XR smartphone from Apple on the Macincase website, where protective accessories are presented in a wide range.

How to get around the iPhone password without itunes

If you want to achieve the greatest success, Fonelab unlock for iOS your first selection. The whole process of unlocking the iPhone password is easy to operate. You can easily remove the IPhone lock screen, following the indications of the master on the screen. All you need to do is connect the iPhone to a computer.

Later, follow the screen instructions for going around the iPhone password to return the iPhone. You also need to specify your Apple ID and password. This may prove that you are a real owner of a blocked iPhone. Well, here are the main features of the iOS password removal tool.

  • Bypassing 4-digit and 6-digit iPhone access code is most likely successful.
  • Remove the forgotten password from a blocked, disconnected or used iPhone.
  • Compatible with the latest devices iPhone 14 and iOS 16.
  • Safe, clean and easy to use.

Now go to the management of how to get around the iPhone password.

Fonelab helps you unlock the iPhone screen, delete the Apple ID or its password, remove the screen time or restriction password in seconds.

  • Helps you to unlock the iPhone screen.
  • Removes Apple ID or its password.
  • Remove screen time or password in seconds.

Step 1 Presentation Fonelab unlocked iOS after installing. Choose wipe the password for password with iPhone.

Step 2 Press the start in wipe the password screen screen. Connect the iPhone to the computer using the Lightning USB-cable.

Step 3 Check information about the iPhone discovered. Press the start to confirm and move on. The program will immediately start loading the firmware package.

Step 4 click to unlock the iPhone forgotten by password.

Step 5 in the folder confirmation of the unlock screen, enter 0000 in the right place. Finally, click to go around the iPhone password without iTunes or fingerprint.

How to get around the iPhone password by recovery

iTunes may be your free IPhone unlock tool. You can use iTunes to freely bypass the password iPhone. Before unlocking the iPhone, you need to update iTunes until the latest version on your computer with Windows or Mac. Later you can restore iPhone using iTunes to get around the iPhone screen password. However, this method does not work if you turned on the Find My iPhone earlier.

Step 1 Open itunes. Connect the iPhone to a computer using a USB cable with lightning.

Step 2 Put the iPhone into recovery mode. For the iPhone 8 and later versions of iOS devices, quickly hold and press the volume increase. and then decrease in the volume button. Later, hold and click on the main. Until there is a recovery screen screen. (To get around the iPhone 7 password, you need to click on the main one and reduce the volume at the same time button, so that instead, transfer the iPhone into a recovery mode.)

Step 3 iTunes can automatically recognize your iPhone. Click Restore in a pop.up notification.

Step 4 Select the recovery of a backup in iTunes conclusion section. Now you can unlock your iPhone using iTunes.

How to unlock the blocked Apple ID using two.factor authentication

If you tied your phone number or email address with your Apple ID, you can use two.factor authentication to unlock the Apple ID on your iPhone XR. You need a trusted phone number or trusting device. Just follow the detailed process as shown below.

Step 1 Go to the setting application on your iPhone. You can click on the option at the upper part of the integration, displaying your name, Apple ID and other data.

protective, blocking, iphone, activation

Step 2 Choose a password and safety icon, and then tune to change the password, the ability to reset the password for Apple id.

Unlock Activation Lock iCloud #shorts

Step 3 after you entered the iCloud and turned on the password, you can enter a new Apple password to get around the blocked Apple ID.

How to enter the blocked Apple ID using the account recording restoration key

In the settings of your Apple ID there is a function of the account recording restoration, which can increase the safety of your account. If you turned on the recovery key on your iPhone XR, you can also enter the blocked Apple ID using this function.

Step 1 to unlock Apple ID using the recovery key, you need to go to the official website of Apple. Go to the Apple ID account.

Step 2 Click the badge forget the Apple ID or password option and enter your blocked Apple ID. Select password reset and click continue the button.

Step 3 Just enter the recovery key. You can choose a trusted device to get a 4-digit check code on it to bypass the blocked Apple ID.

Step 4 You can create a new password with a confirmation code. Then click the password reset button option. After that, you can subscribe to your Apple ID with a new password. (What to do when the Apple check failed?)

“Removing activation lock (iCloud) through third parties

If you are still trying to remove the iCloud lock on your device after an attempt to use other options listed on this page, then we recommend moving on a third-party route, we tested several different online companies and received good reviews for two, in particular, in particular. Firstly, this is Appleiphoneunlock and, secondly, doctorunlock. Great news. This is a very straightforward service, and all this is done remotely through IMEI, so you do not need to take it anywhere or send your device. Given the that we saw in other places for a similar service, they are very reasonable, and the turn to complete the unlock was excellent.

There are not many options for how to get around the activation block on the iPhone 5. most often to bypass the activation blocking, use errors in the operating platform. The safety specialist of mobile devices went around the protection in less than five minutes. he simply introduced a large number of signs in the fields to fill out information about the wireless network. Another iOS 11 error also leads to a shutdown of locking. Update the device, and then at the stage of installation of language and regional parameters, press the “home” button three times. After that, you need to run many times with your finger from below-up on the screen, and the smartphone will function without blocking the activation.

Device users themselves and experts in the world of electronics claim that it is not worth relying on the errors of operating platforms, since Apple is improving products. today the bug is present, tomorrow it will not be. Therefore, the “craftsmen” are looking for alternative methods of bypassing blocking so as not to turn the smartphone into useless, but expensive trinket. Found a “legal” way to remove the blocking using the “Find iPhone” function.

Activation Lock Bypass #Shorts

  • Go to the official website icloud.COM and enter the Apple ID account account.
  • Open the “Find iPhone” tab, and click “All devices” at the top of the display.
  • Select blocked iPhone in the list and click “erase”.
  • Click on the item “Delete from the account”.
  • Reload the device.

Also, with two.factor identification, the smartphone can be unlocked in the input of the installed key. But it happens that the described methods do not help. then use a complex, but proven method.

Energy.saving mode and auto.locking screen

In the energy.saving state of the phone, the automatic lock time is 30 seconds, and this interval is not amenable to change.

This is not a bug, so the developers made sure that the phone served as long as possible before connecting to the charger. In order to remove the restriction, you only need to turn off the energy.saving regime.

The function “Auto.yardness

Auto.yardness. built.in adjustment of the brightness of the display, which depends on the conditions of illumination. The function “Auto.yardness” by default is included. To turn off this option:

Translate the carbon coal tumbler into active mode.

How to enable iPhone lock screen

First, let’s start with the iPhone lock screen sett. All you need to do is enter 4-digit or 6-digit characters and confirm. It depends on specific iPhone models. After installing the password of the screen lock on the iPhone, you will be required every time you unlock the iPhone screen. over, you need to enter the correct password of the iPhone lock screen when rebooting the iPhone and updating applications.

Step 1 Turn on the iPhone. Go to the settings application

Step 2 If you use iPhone x / xr / xs max / xs / 11/11 Pro / 11pro Max / 12/12 mini / 12 Pro / 12 Pro Max, you need to select the face and password identifier and password. As for the earlier iOS model, you need to choose a Touch ID and password.

Step 3 click turn on the password near the bottom.

protective, blocking, iphone, activation

Step 4 in the folder set the screen password, you can enter a password to activate the iPhone lock screen.

Fonelab helps you unlock the iPhone screen, delete the Apple ID or its password, remove the screen time or restriction password in seconds.

  • Helps you to unlock the iPhone screen.
  • Removes Apple ID or its password.
  • Remove screen time or password in seconds.

How to disable iPhone lock screen

Sometimes you need to turn off the password of the iPhone lock screen for one reason or another. For example, you need to sell or give your old iPhone to other persons. over, it is recommended to use another password for blocking the iPhone screen after a while. Thus, you can protect your iOS data from exposure. Here is a guide to turn off the password of the screen on the iPhone.

Step 1 Open the Settings application application on the iPhone.

protective, blocking, iphone, activation

Step 2 View and select the identifier of the face and password or Touch ID and password. (Depends on the model of your iPhone.)

Step 3 correctly enter the previous lock screen password.

Step 4 Select the password on the iPhone screen, and then confirm this.

Step 5 You need to enter the same iPhone lock screen. After that, your iPhone will not be protected by a lock screen.

protective, blocking, iphone, activation

What to do if nothing helped you?

If you do not have access to a computer with an authorized iTunes, you can use applications to restore blocked iPhone, but this is worth doing only at your own peril and risk. For example, it can be the IMYFONE LockWiper program (recovery occurs through the DFU mode, the program replaces iTunes). There is also a 4ukey program that helps without iTunes to scope the phone to factory settings and put the firmware.

And, of course, an extreme case with documents confirming that your phone is to contact the service center or to the company itself. the letter will have to be written in English.

The main methods of unlocking

We will analyze the most popular and effective methods. The meaning of such a variety of approaches is that even in advanced cases, the owner has options for unlocking the device. “Apple” products are hit on the of customers, people are not ready to just throw out the iPhone to purchase an updated model. For each incorrect attempt to enter the password, the counter to the next increases, and is able to calculate for years. The main thing is to remember that it is not always possible to save user files, so do not forget to make backups in iCloud so that in emergency cases, quickly restore photos, music, other files, applications and settings.

Resetting the counter of incorrect attempts to enter

If the iPhone is synchronized with a computer, then the user will be able to unlock the iPhone by dumping the counter.attempts to enter the input. The method is suitable if you managed to remember the password, and the counter until the next attempt shows not a minute, but hours and days.

  • Connect the device to the computer via a USB cable from the delivery kit.
  • Open iTunes and find the “Devices” item. In the new window, click the “Synchronize” button.
  • After synchronization of the iPhone with a computer, the temporary lock will turn off, the user will be able to enter a password.

If earlier the phone is not synchronized with the computer, then the counter will not work out, the PC requires access to the contents of the smartphone, which needs to be confirmed. This is done on a mobile device, and if the smartphone is blocked, then it will not work to provide access.

Recovery mode

In the recovery mode, the smartphone settings are zero, and the iPhone unlock. The file system is checked, the smartphone rolls to the recovery point. To convert the device to mode you will need:

  • Turn off the iPhone using the “Food” button;
  • connect a USB cable to a computer without a smartphone;
  • hold the “home” button and connect the smartphone to the PC;
  • run iTunes, select the iPhone connected in the list;
  • Select “Restore” and then wait for the process to complete.

For iPhone models, starting with 8, the recovery mode is launched differently. first you need to turn off the smartphone and connect to the computer. Then quickly squeeze and release the button of the sound addation, we do the same operation with the keyboard decrease keys. Squeeze the “Nutrition” button until the iTunes logo appears.

Firmware update

Now let’s talk about how to unlock the iPhone by updating the firmware. To do this, you will need a computer connected to the Internet, a USB cable, as well as the current version of the ITUNES program.

  • Connect the iPhone to PC via cable.
  • Launch iTunes. In the list of devices, choose a connected smartphone.
  • Go to the “Overview” item, in the program window opened on the “Update” button.
  • Confirm the choice by clicking “download and update”.

The nuance is that the program sometimes requires password entering, which is irrelevant if the digital code is forgotten by the user. Remember that it is not recommended to disconnect the iPhone during the update, so as not to turn the device into a useless piece of plastic with microcircuits.

Unlock through iTunes

The ITUNES program is an indispensable assistant to the owner of the company Apple. The case is not limited to simple file management, the application helps with the errors of the operating platform, freezes and problems with the battery. In the case of a forgotten password, this program will also become the main tool for solving the problem. The advantage of using the program is that the instructions are extremely simple, so it is possible to use this method at home, without going to the service center. And do not be afraid of errors, because the manufacturers of Apple smartphones have provided opportunities for the rollback of the device to the recovery point or factory state.

While saving user files

Let’s talk about how to unlock the iPhone through iTunes while maintaining user information. If the screen is blocked, then Hard Reset and a simple reloading of the device will not help, the counter will remain in place. To save information, it is worth using the recovery mode. Recovery Mode does not affect files, only rolls the smartphone to the last successful launch, but the password will drop. It is important that the smartphone is synchronized before that so that the iTunes program does not request password entering. IPhone will also not be able to connect to the new computer, since an unlocked smartphone is required to conjure.

Through the previous synchronization

The method of unlocking the smartphone through the previous synchronization of the device with a personal computer is considered a priority because it does not affect the user files and settings. For this:

  • Connect through the iPhone cable to PC;
  • Open the iTunes application and wait for the completion of the conjugation. the computer will need time to read files;
  • Select the connected device in the list and press the “Synchronize” button;
  • Wait. the process lasts from a couple minutes to a couple of hours;
  • After completion of the conjugation, click on the “Recovery of Data from the backup of iTunes” button;
  • In the list, select a suitable backup by date. it is recommended to choose a fresh option.

It remains to wait for the completion of the process, the lock lock will be reset. the user will get access to the device.

With full cleaning

If synchronization with a computer was not performed, or information is not valuable for the owner of the iPhone, then you should use the DFU mode. In this case, the phone will return to the state of factory, the information will have to be restored from scratch. This will need:

  • turn off the iPhone;
  • Squeeze and hold the buttons “Food” and “Home”;
  • release “food”, and holding the “home” connect the smartphone to the PC using a cable;
  • wait for the iTunes logo on the iPhone display and start the program on the computer;
  • A message will open on the screen that the phone is connected in recovery mode, you must click on the OK button;
  • Confirm the choice by clicking “Restore the iPhone”.

As a result, the iPhone will begun, the files will disappear, and the settings will return to the factory state.

Unknown error when connecting to iTunes

Some users are faced with the fact that the iPhone does not connect to iTunes and issues with an error 0xe8000015 with a blocked phone. There may be several reasons for its appearance:

  • The problem is in the cable to which you connect the iPhone and the computer. try using another port or cable.
  • Old version of iTunes. update the program to the latest version, restart the smartphone.
  • On Windows Open the Device Device. “USB controllers”, click on the Apple Mobile Devices USB Driver with the right mouse button, update it, reboot the computer.
  • Use another computer, since this error is a consequence of the software conflict.

Typically, updating iTunes or drivers helps to complete the restoration of iPhone through iTunes. If this is not your case, restore the phone via “find iPhone” in icloud.

How to unlock the iPhone through iCloud

If you have another device connected by the same Apple ID as the disconnected phone, it is easier to use the “Find iPhone” function or the locator application for washing. You can use the locator only on devices with MacOS or iOS, connected to one Apple ID, as well as a blocked phone.

To unlock the iPhone without a password via iCloud, you must go to the icloud website.com, enter your account.

Next, select the “Find iPhone” menu and the desired phone, then press “erase the iPhone”.

In a few minutes, your phone will be dropped to factory settings and you can use it after entering Apple ID.

Now you know why the iPhone asks to connect to iTunes and what to do in this situation. If something is not clear-ask questions in the Комментарии и мнения владельцев.

In order not to face unlocking the iPhone in the future, it is worthwhile to be more careful when entering the access code or disconnect the use of the password (for security reasons we are against this option).