Samsung TV how to enable the Internet. Features of wireless connection

Modern Samsung Smart TV TVs can completely replace another technique through which Internet access is made. There is no need to go to the network more, use online kino sites on the phone or tablet. It is much more convenient to view video content for a large diagonal. So that all the possibilities are available, you need to connect the Samsung TV to the Internet via Wi-Fi or directly with a cable. Each method has its advantages and disadvantages. Despite the prevalence of models with Smart TV, not all devices support a wireless connection in the factory configuration.

The official website of Samsung says that you can use the Internet only on “smart” TVs. Smart TV.

In each TV, it is possible to connect via a network cable. In some TVs until 2016, the release to the Wi-Fi access point needs to install an external wireless adapter.

List of models without Wi-Fi

The number of TVs without a built-in Wi-Fi module is small. The list included some of the Samsung models, which were released until 2016. This applies to the series e, f, h, j. Later series (K, N, M, Q, LS, R, T) can connect to Wi-Fi network.

TVs without Wi-Fi: ES5557, ES5550, ES5507, ES5537, ES5530, ES5500, EH5307, EH5300, E557, E550, F5300, H5203, H4203V, UE58J5200.

Turn on Wi-Fi on the listed models after connecting the adapter. The device looks like an ordinary flash drive externally. Inserted into any USB port on TV.

The manufacturer “Samsung” recommends using the branded adapter of the Wis12 model. Without it, you can set up the Internet only through the cable.

Internet setting on Samsung TV

The main difference between Smart TV and ordinary TVs is the integration of a “smart” block. The manufacturer uses the TIZEN processor, which in terms of functionality brings the device to the computer. To use the capabilities of the Internet, it must be connected to the global network. You can do this in two ways: wired and wireless.

Wired Internet

Connection is performed using the RJ45 Ethernet Cabel network to the LAN port. The advantage of this option is the high speed of the Internet, the most clear and stable signal, fast setting. The disadvantages include the abundance of wires and the need to buy an external modem (brancher). Without it, it will be impossible to use a wired connection for other home devices.

Experts recommend connecting the Internet to the Internet through the router, and not directly (when the cord is inserted into the connector on the TV panel). Since providers use various types of connections, there is a chance that not all of them will be compatible with Smart TV.

When connected via the router, a DHCP server is turned on (it involves the automatic appropriation of the IP address), and the router independently performs network settings. The protocol of the dynamic configuration of the network node is almost always activated by default. But, if, nevertheless, the provider issued a static IP address, you will need to set parameters manually. This follows:

insert the cable into the connector and go to the TV menu;

Open the section “Network Settings” and select “Cable”;

In the window that appears, manually introduce all the parameters that the provider issued, and press the OK button.

Network connection setup will be performed.

Wireless Internet

Most Samsung TVs are equipped with a built-in Wi-Fi router. In this case, to ensure the connection, you will need to perform the following actions:

select the necessary compounds in the list of available connections;

After synchronization, a notification will appear on the screen that the device was successfully connected to the network.

The TV does not connect to the Internet: reasons and solution to the problem

Sometimes the owners of “smart” TVs are faced with the problem of access to the Internet. The reasons may cover in irregular connection, incorrect Smart TV or router settings, problems that occur at the provider. To avoid this, you need to analyze the most common reasons and find out how to eliminate them.

Connection TV to another Wi-Fi network with limited Internet access

Go to the “network settings” and select the desired type of wireless connection

Как подключить телевизор Smart TV Samsung к интернету по Wi-Fi

The wrong password was introduced when connecting to the access point

Indicate the correct security key and repeat the attempt

Disconnect the function in the router and enter the parameters manually by moving to the menu → Network → Network condition → Refuse IP

The function of automatic appropriation of IP and DNS by television equipment is disabled

In the TV menu, repeat the path specified above, only in the IP settings to activate the “receive automatically” option

Lack of connection with the Internet when connecting the provider cable to TV directly

Check the condition of the cord or configure the connection through the router

Software failure or error on TV, outdated version of the operating system.

Go to the official Samsung website and download the updated firmware

Wi-Fi Internet connection connection

There are usually no difficulties in this matter. To synchronize the television receiver with the Internet, the user will need:

  • Wi-Fi router. This is a device distributing a network for other gadgets. Usually connected to a computer and sets up in a web-integer.
  • TV with a built-in Wi-Fi module.
  • Connecting TV to wireless Internet through its settings.

Within the framework of this article, the intricacies of connecting the Samsung models to the Internet will be considered.

Connection features depending on the model of the Samsung TV

How to connect Wi-Fi to Samsung TV? In general, the Samsung TV synchronization process with a Wi-Fi router is as follows:

  • Go to the “settings” device using the remote control panel.
  • In the menu opened to switch to the “Network” section.
  • Next, you need to find and choose the option “Network”.
  • In the next window, the user will need to familiarize yourself with the system notification, and then press the “Start” button to launch the synchronization process.
  • In the menu of choice type of network connection, click on the “wireless” version.
  • After the above manipulations, the process of searching for available access points will begin. Depending on the specific TV Samsung model, this procedure may take from 5 to 20 seconds.
  • At the end of the search, select the name of your wireless connection and enter a password to synchronize with it.
  • Check the result. You need to go to the browser installed on TV samsung by default, and check the presence of the Internet. Perhaps you have to configure individual parameters.

Important! On some models of Samsung TVs, a number of errors may occur when connecting to Wi-Fi. Also, the names of the main tabs may vary.

Connection to Wi-Fi on Samsung TV

samsung, enable, internet, features, wireless

If the TV does not connect to the Internet

The impossibility of synchronization of the television receiver with a wireless Internet is most often associated with the wrong router settings. Further, ways to solve the most common problems will be considered.

Install Smart TV settings manually

This process is carried out through TV parameters in several stages:

  • Go to the “Settings” of your TV samsung.
  • Disable the function “DHCP”.
  • Set the network parameters manually. The user will need to fill in the fields “IP address”, “Mask subnet”, “gateway”, “server DNS”. This information can be recognized in the web-integse of your router.
  • Reload the router and TV after conducting such actions.
  • Make sure that the problem is solved.

Change of connection method

Samsung TVs can be directly connected to the network. To do this, you need to stick the wire coming from the network provider in the LAN connector on the television receiver. After that, you need to go to the “network settings” on the TV and indicate the “cable” option as a type of synchronization, install the toggle switch in the corresponding line.

Next, TV must automatically determine the device connected to it, and the user will remain to enter the network name and password for it. This information is also provided by the provider.

The disadvantage of a direct connection is the inability to provide the Internet with other devices, gadgets (for example, a computer or a telephone of the Internet from the TV will not receive anymore). There is also a direct connection of Wi-Fi to the Samsung TV through the “plate”.

Additional Information! If a direct synchronization with a network works on TV samsung, then the problem is most likely in the built-in Wi-Fi adapter.

Introduction of MAS-Adris

In the Wi-Fi Wi-Fi Wi-Fi, you can change the MAC address of each device connected to it. In this situation, it is enough to change the Samsung MAC television receiver. To do this, you need to do a number of actions according to the algorithm:

  • In the settings of your router, go to the section “Network”. This tab is called differently depending on the router model.
  • In the parameters of the TV, get acquainted with the MAC address.
  • Rewrite the manually indicated for TV MAC address by introducing it in the web-integrator of the router.
  • After rebooting, check the performance of the wireless Internet.

Rebooting equipment

Problems caused by a short.term failure can be solved by restarting the router and TV. The devices must be turned off for 2-3 minutes, and then perform the synchronization process again.

Elimination of interference affecting the quality of the signal

Sometimes a television receiver cannot connect to a Wi-Fi router due to a bad signal. To stabilize the signal level, it is necessary to reduce the distance between the devices in question or set an additional repiter of the house.

Automatic connection

Some Samsung models have a WPS function that allows you to automatically connect TV to the router. To activate the mode, the user must simultaneously squeeze these buttons on the television receiver and on the router, holding them for several seconds.

Setting up the settings on the TV

You can eliminate Wi-Fi performance problems on TV Samsung after the full reset of system parameters. The process of transition to factory settings on TVs of this model is divided into the following stages:

  • Turn off the television receiver.
  • On the remote control, click on the buttons “Info”, “Menu”, “Mute”, “Power” in the indicated sequence. You need to press in turn and quickly. After that, the Smart TV should start.
  • In the displayed service menu, switch to the “Option” line and click on the OK button to confirm action on the remote control.
  • In the new section, click on the Factory Reset parameter and make sure that the device has turned off.
  • Turn on TV again.

After the above manipulations and re.inclusion, the television receiver must earn with factory settings. Now you can re-connect to Wi-Fi, enter the password for protecting the access point.

Samsung settings reset

Software Update

Perhaps the router works at a frequency not supported by the TV, which allowed the Internet to get down. To eliminate such a problem, the router needs to be relying. To do this, you need to download the firmware file and install it on the router, following the installer instructions.

Important! The Wi-Fi transmitter flashing is not recommended to be performed independently in order to avoid problems with his work in the future.

DNS errors

Sometimes the replacement of existing DNS helps to correct the situation with the inoperability of the wireless Internet on the television receiver. To change this parameter, in the settings of the network on TV, you need to prescribe manually operating DNS from Google. You can find out these values ​​in the search engine of any browser.

How to use?

The most advanced Samsung Smart TV models are rightfully considered one of the best representatives of the generation of smart TVs. This is possible not only thanks to the high quality of video and audio, but also a very simple, intuitive intese, which even a person can understand, very far from modern high technologies. The built-in browser allows you to use TV as a full-fledged computer replacement, in terms of finding articles, video, photo and audio materials. All TVs are equipped with a comfortable remote control, where there are Smart TV call buttons (multi.colored cube).

After connecting the TV to the network, you can begin to use it and install it:

Simsung smart TVs have a lot of useful and unique functions, which makes them sales leaders in their segment. You can find all the applications of interest through Samsung Apps. The most popular among users are services for watching films and TV shows: Megogo, Zoomby, YouTube, Vimeo, IVI. The application itself will prompt popular and classic versions, highlighting them in the recommendations.

For gaming applications, for more convenient use, you can supplement your TV wireless keyboard and mouse that can be connected to the USB connectors.

Possible problems

If Smart TV on the Samsung TV refuses to work normally or does not turn on at all, then there may be several reasons for this.

  • Low speed of the Internet connection or its absence. If TV is connected via Wi-Fi, and the cause of instability is a slow connection, then you can try to connect TV to the router via LAN cable. If there is no connection at all, then this can be caused by problems on the server of the manufacturer Samsung or Provider.
  • Memory overflow due to loading a large number of widgets. Periodically it is necessary to clean the memory of the TV, deleting unused applications. When there is little free memory, the device begins to slow down.
  • In the browser “clogged” cache. It also needs to be regularly cleaned. This will release memory and avoid hanging.
  • The firmware version is outdated. When the new update is released, TVs using the old version begin to slow down. You can download the update both directly on TV (if the speed of the Internet connection is high) and downloaded by PC to the flash drive, and then connect it to the device, updating it.

The reason for the hovering of a smart TV may also be its incorrect setup. Very often, until this moment, a perfectly working TV begins to lag, if children “subside” in it or adults accidentally made changes to the settings. The solution to the problem is to reset Smart TV Samsung to factory settings. After you need to restart the device.

But most often in the fact that the TV does not work, the remote control is to blame. This is the most common reason for users’ contact specialists of service centers. The remote control can fail for various reasons, first of all you need to check the elementary. perhaps the batteries sat down. Then you need to replace them. Also, when using power elements with low energy intensity, the TV does not immediately react to pressing on the remote control, but the technique itself is in perfect order.

Check if everything is in order with the remote control or its repair will be required, you can use the camera of any smartphone. To do this, you need to turn on the camera on the device and, having brought the remote control to it, press any button. If you see a red light from the remote sensor in the chamber, it means that it is working. If there is no reaction, then you need to contact the service center.

If Smart TV suddenly hung and does not respond to any actions, then it can be reloaded. To do this, turn off the device from the network for 5-10 minutes, and then turn on again. As a rule, this simple technique helps, because smart TVs are very reminiscent of computers and smartphones in their internal content, and they also sometimes need a reboot.

What to do if the TV does not connect to the Internet

In some situations, debugging is not obtained, the television receiver refuses to enter the global web. Problems may consist in incorrect Smart-TV debugging or in connection with the incorrect work of the modem.

The list of common malfunctions when joining is related:

  • with an automatic connection of the receiver with someone else’s wireless line, which has restrictions on Internet access, the problem is corrected by entering the main menu and the transfer of the device into a home grid;
  • incorrectly prescribed security password when connecting to the access point;
  • disconnection in the adjustment of the modem of the dynamic configuration of the network node;
  • turned off the automatic assignment of IP and DNS for television equipment;
  • incorrect functionality of DHCP. the issue is solved through the main menu, the user must disable the automatic appropriation of the IP and DNS address and enter information in manual mode;
  • outdated operating system. on the official Samsung website there are fresh versions of software, they must be downloaded and installed.

The solution of the difficulties that arise is not difficult for a phased search for the reasons for the appearance of problems with the connection. If the above sources and solutions did not lead to the expected results, then you need to seek help from the employees of the service center. Experts will quickly solve the issue of lack of Internet, help to carry out its correct connection.

When creating a connection with the Internet of old equipment, problems arise more often. Modern equipment requires minimal interference in the user adjustment processes, most steps are carried out automatically. Do not think that you can connect the ancient device to the Internet via wi-fi. To enter the global web, you will have to use cords and wires, in some cases, additional adapters.

What Samsung TV receivers can be connected to the network

To connect Samsung television receivers to the Internet, it is necessary to find out whether such an opportunity is provided for a particular model, or you will have to use additional devices (if the SMART-optations are not preinstalled). To determine this, you need to open the instructions or enable the TV receiver. As a rule, when starting, the Samsung Smart TV screensaver appears. In the settings of the device there is a section “Network”, and on the remote control there is a large multi.colored button “Smart Hub”. All these signs report that the technique belongs to the category of Smart devices, which means that it can be connected to the Internet. For this, the television reception provides: the LAN connector (cable connection), Wi-Fi protocol (wireless) or both options.

To connect to the Internet, it is recommended to use a cable. Such a connection is more stable, and the speed of transmission is higher. The cable is brought in two ways: directly from the service provider or through the router.

Directly from the provider

When connecting via a cable that goes directly from the provider, you need to bring it from the entrance to the apartment (house) to the TV and insert it into the LAN connector on the back of the case to the click.

Important! You should know that the connection will not work right away if the provider provides for entering a login, password and other data.

After connecting the wire, you need to set up a television receiver. This process is similar for technology of different series, but there are some differences in the menu integration, in particular, in the presence of individual sections or in their name. Here’s how the wired connection is set on TVs E:

  • on the PDU you must click the “menu”;
  • There you need to go to the “Network” tab;
  • Then you should open the “network settings”;
  • After the cable is determined, and the appropriate notice will appear, you need to click the “Start”;
  • It remains to wait for the process to complete and click “OK”.

On television receivers of the series j, the process looks a little different. To configure the connection with the network requires:

  • press the “menu” or “menu/123”, and then select the corresponding point on the display;
  • Open the “network”. “network settings” sequentially;
  • in the “Type of the Network” select “Cable”;
  • wait for the end of the process and click “complete”.

On a note! For models of other series, data setting data can be found in the management or website of Samsung in the Support section.

Through a router

For a wired connection to the network, you need a cable coming from the supplier through the router, connect to the LAN connector on the router, and from its WAN-port another free wire to the television receiver. Further actions are similar to the previous method.

Wireless exit methods

The Internet connection can also be carried out through the Wi-Fi Module built into the television receiver, and if it is absent, through the external Wi-fi adapter. For greater convenience, it is recommended to use WPS or Plugaccess technologies, if any, are supported not only by the TV receiver, but also.

Built-in Wi-Fi

If the TV has a built-in Wi-Fi receiver on the TV, you can connect to the Internet without a cable. As with a wired connection, the general principle is similar for models of TVs of various series, the differences relate only to the names of some sections of the menu.

In the general case, to establish communication, it is necessary to open “Settings” in the device menu, then “Network”, and after. “Network Settings”. The “network type” drop-down list needs to select “wireless”, and then in the list of detected Wi-Fi connection, you should find the desired network and enter the password. In more detail, the process of connecting via Wi-Fi for specific models Samsung SmartTV is described in the instructions or on the official page of the manufacturer.

Wi-fi adapter

On some inexpensive models of television receivers for connecting to the network, only the LAN connector is available, the wireless module is not installed on them. If there is no desire or ability to connect through a cable, you can purchase and install an external Wi-fi adapter.

Wi-Fi-adapter is a small device the size of a flash drive that is connected to a free USB-section on the body of the television receiver. After connecting within a few seconds, the receiver identifies and the installation of drivers, after which the flashing indicator on the adapter case will inform that the equipment is successfully associated. Now in the “Network” section of the television panel, a wireless connection will be available. Further actions are similar to those described when using a built-in Wi-Fi receiver.

Advice! In order not to make a mistake when buying an adapter, you should choose the device only Samsung production. In some cases, it is allowed to use the device of another brand, but only if its compatibility with the TV receiver. The list of TV modifications for which Wi-Fi-adapter is designed, as a rule, printed on its packaging.


WPS standard (it is also indicated by QSS on some models of routers)-a convenient solution for connecting by Wi-Fi, which should be used to simplify the settings. It is available in two versions.

  • WPS-PBC. With this method of access to the network, you need to open a “network” in the “settings”, then “wireless connection”, find “WPS” and select “WPS-PBC”. After that, you need to find on the router housing, and then press and hold the WPS button until the connection between the devices is configured. If there is no result, you need to dial 192 in the address line of the Internet or to go to the route web-integer and include the option under consideration in it if it is inactive.
  • WPS-PIN. To use this method, you need to activate this option in the settings of the television receiver as it was indicated above. Then the code will be displayed on the television screen. Next, you will need to open the route web-integer, find the WPS tab and click “Add the device”, and then enter the code value shown on the TV screen in a special window. After a few seconds, a notification of installation of the connection will appear.


This is a technology for convenient connection to the network from Samsung, but to configure the connection, it involves the use of flash drives. First, the flash drive must be placed in the USB router. After some time, the indicator will begin to flash on the display of the device. Then the flash drive must be pulled out of the router and placed in the corresponding free port on the TV receiver. As soon as the notification of a successful connection is displayed on the screen, the USB drive should be removed.

Ways to view free TV channels on Samsung Smarttv

You can watch free TV channels on Samsung Smarttv TVs in several ways. As on simple TV receivers, etheric digital channels can be configured through a regular antenna, but if you install an Internet connection, it becomes possible to download special applications and configure interactive television with a much larger number of video content.

  • If you connect the usual etheric antenna or cable television, you can configure the broadcast of at least twenty free digital channels.
  • If you use the “smart” functionality of the television receiver, then by installing access to the network, from the Samsung Apps store or from other sources, you can download applications for viewing interactive television (IPTV), which provide the ability to view several dozen television channels, both publicly accessible and thematic (sports. musical and t.D.).

On a note! Some Smart applications offer more than 200 television channels, but you will need to pay for the subscription.

Public channels

To configure free channels on Samsung Smart TV, you need to connect the antenna to the device, and then use the auto.tank function that will not only find them, but also put them in a certain order. On TV receivers of various episodes, this option is launched in different ways, as their integration is different: individual sections may be absent or have other names. For example, consider the sequence of actions performed during automatic setting of channels on the TVs Samsung Smarttv series R (2019):

  • First you need to connect the antenna cable to the entrance with the marking “Air/Cable” on the back of the television receiver;
  • Then you should turn on the device, press Source or Home (depending on the variety of the remote control), and then. the “source” and install “TV”;
  • The next step is to open the menu of the television panel, clicking on the PDU “Menu” or “Home”, and then. “Settings”;
  • Next, you need to go to the “Broadcast” tab, select “Auto” and “Start”;
  • The “Antenna” section will need to select “Antenna” (if the cable goes from a common house or internal antenna) or “Cable” to view cable TV;
  • Then you should specify the “type of channels”. “digital”;
  • For the cable TV in the “Operator Choice” field, it should be noted “others”, and in the line “search mode”. “full”;
  • The last step is to press the “scanning”, wait for the end of the auto.building and click “Close” when the process is completed.

Advice! Since the procedure may differ on the television.receivers of other episodes, it is recommended to find a description of the process for a particular model in the operating manual or on the manufacturer’s website.

Watching interactive television will be an excellent solution when connecting a television antenna is not possible, or it is already used by another TV receiver. In order not to use the bias and not pull the cable in the apartment to the second television receiver, thereby worsening the quality of the picture, the best solution would be to watch television online via the Internet. The maximum that is needed for this is to connect the equipment to the network and download a special widget for IPTV show.

What models support IP-television

The broadcast of the IP channels is supported by all Samsung Smarttv television panels, starting from the series B with the Smart Hub section. In different models, depending on the year of production and platforms, parameters such as the SMART HUB service integer, applications in Samsung Apps, as well as ways to install them. For this reason, on different lineups of Smart voltage Sansung, only the loading of widgets and setting up IP-television will differ slightly.

IPTV setup

To set up IPTV on the Samsung TV, you will need to connect the Internet to the Internet via Wi-Fi or Ethernet cable.

Advice! It is recommended to use a cable connection, since it provides a higher speed of the Internet connection, and the signal itself will be much more stable.

Having completed the network, you will need to register in the Smart Hub service and download one of the many free applications for IPTV, after which you can start viewing interactive channels.

Possible problems and their solution

In most cases, errors arise when setting Smart Hub, which are mostly associated with the Internet connection.

  • If, with a cable method of connection, all actions to install the connection are performed correctly, but there is no access to the network, you need to make sure the integrity of the wire.
  • With a wireless connection, it is recommended to use WPS technology if it is supported by the technique. In this case, the probability of incorrect password entering is excluded.
  • In some cases, in the absence of a connection with the Internet, restarting the router and television receiver helps.
  • Also, problems can be related to outdated by router or TV. It will be necessary to update the firmware of the devices.

If the connection is installed, but the pages during the web set are poorly loaded, and the video is constantly hanging when watching the online, the problem can be at low speed of the Internet connection or in the fact that the router is at a great distance from the television reception. In this case, it is recommended to change the tariff to another-at a greater speed, or move the router closer to the TV receiver.

So, if the user wants to expand the capabilities of his Samsung Smart Tel, he needs to connect and configure Smart Hub. This service provides access to films and series, interactive television, games, applications and other entertainment content. The process of connecting the Internet to the Internet and the subsequent setting is very simple. A detailed description for each specific model is available in the user manual or on the manufacturer’s website (for the year of release).

How to set a digital TV on Smart TV

For owners of “smart technology”, free viewing of many channels is available that are broadcast on cable television. Did not know about such a bonus? We tell you how to set up channels on Smart TV using the software module for IP TV.

To watch channels that are broadcast on cable television, without payment, the following conditions are needed:

If you know how to use the application store, you can safely start setting. The following sequence of operations must be performed:

  • Enter the online store and install a free SS IPTV program.
  • Enter the settings by clicking on the corresponding icon.
  • Add Play List.
  • Select the desired channel for viewing.

At the first connection of the Play, you must fill out. You should either manually write the addresses in the settings of the TV receiver, or connect the computer, and already use it to fill out the playback lists. The second way is undoubtedly more convenient.

Samsung Smart tv Connected to Wi-Fi But No Internet | How to Check

Play Listers can be found on the SS IPTV website or on the resources of other providers. The number of external playback lists is not limited. Inner Play List only in a single copy.

To download the external list of reproduction, you need to enter the Content tab, find the category of “external” and click on “Add”. Indicate the name of the list and its url.

To add the internal Play List, you need to go to the Directory “General” and click on the “Obtaining” item. The list is valid during the day or until the next encoding combination is generated. Symbols should be entered into the Play-Listen editor on the SS IPTV website.

There are other programs for working with IP TV: Peerstv, Vintra.TV or Forkplayer.

For “smart” TVs Samsung 5 or 6, released later than 2010, a convenient way to connect to digital broadcasting is available. How to set up channels on Smart TV “Samsung” in this case? Follow the simple instructions:

  • Download the NSTREAMLMOD program.
  • Activate the Smart Hub function.
  • Press the A.
  • Enter the “Create account” tab “. Enter the login (default Develop) and password (by default it costs 123456).
  • Click on the icon “Create an account”.
  • Repeated login and password again.
  • Press the Tools button on the remote control and select the Directory “Settings”.
  • In the list of teams, select “Develop”.
  • Indicate the IP address of the server in the field “Setting IP Address”. Now the IPTV service is installed on your TV.
  • Enter the “Applications synchronization” tab and click Enter.
  • Find and run the NSTREAMLMOD program.
  • In the Playlist URL 1 field, enter the right address.
samsung, enable, internet, features, wireless

After performing this simple algorithm on Samsung with the Smart function, digital TV will be configured.

On the Smart TV you can view public channels. How to set up a TV via “Smart TV”? Nothing complicated. It is enough to perform simple actions:

  • Open the settings.
  • Select the category “channels”.
  • Enter the subcategory “Automatic Search”.
  • Indicate the antenna or cable as a signal source.
  • In the “Supplier” tab, select “Other”.
  • Design the frequency boundaries.
  • Activate “Search for digital and analog channels”.
  • Wait until the system completes the search.

This function will need few users, but in the regions local television is sometimes broadcast only in analog format.

How to update “Smart TV

TV software is called firmware. It must be updated periodically to optimize the work of the device and get additional functions. This procedure should be performed once a year, but sometimes flashing may be required earlier.

Experts advise updating the firmware by loading a new version through the “flash drive”. This is safer.

Before the flashing starts, you should make sure that the update is required. Make sure the program you plan to download is compatible with your television device. If you install an inappropriate update, the equipment will work incorrectly, perhaps even fails.

For each model, developers create separate programs. Be sure to download the firmware from the official site of the manufacturer. Accurately indicate the model of your “smart” TV. This information can be clarified in the device passport.

Check which software version has already been installed on your Smart TV. On Samsung TVs, for example, for this you need to go to the menu, select the “support” category and click on the “Update” tab.

Now compare the firmware indices. If the number on the site is higher than that of the program installed on the device, then you need to update. If the numbers coincide, the software does not need to update.

Before installation, you should carefully read the description of the proposed firmware. If the language and installation method coincide, you can safely download the update to the computer. Download the downloaded file to the flash card, after formatting this drive.

Software is packed in the archive. To unpack it, click on the “Extract” button (Extract). Only update already extracted from the archive can be installed on the TV. After unpacking the file, remove the flash drive from the computer and connect to the corresponding television receiver connector.

How to configure “Smart TV” to launch an update? Simple enough. For example, on Samsung TVs, this is done through standard menu services:

The recharge surgery on TV equipment of other manufacturers is performed according to the similar algorithm. There are small differences in the names of the menu items, but the general procedure is the same.