UEFI BIOS How to enter a safe mode. How to enable safe mode in Windows 10

In fact, work in safe mode is the launch of OS with limited parameters and functionality. So, for example, Windows, loads in this mode without starting network drivers. Often users turn to this system of system loading if the OS works incorrectly in normal mode. Thus, you can try to fix various system problems.

Some programs in safe mode may still work fully. Nevertheless, I really do not recommend installing or downloading. Most often, such an installation leads to even more serious problems with the system. Today I want to talk about what a safe mode is and how to enter it through BIOS. Consider in more detail its functionality and capabilities. Cm. also: how to go into safe mode in other ways.

Launching in safe mode through system configuration

To open the “System Configuration” window, you need to click the combination of the ke key, enter the MSCONFIG command and click OK.

The window opens in which we go to the “Loading” tab. If you have several operating systems installed (as mine, in the screenshot below), then select the necessary, install the checkmark near the “Safe Mode” item, click the “Apply” and “OK” button.

There are loading parameters that can also be changed:

  • Minimum. ordinary safe mode with loading only the most necessary drivers.
  • Another shell is a safe mode with command line support.
  • The network is a mode with network drivers (network support).

After clicking on OK, the computer will ask you: go out without rebooting, or reboot. You can agree. After rebooting, when you turn off the computer, Windows 10 will be loaded in safe mode.

In order to then turn off this possibility, and load the systems as usual, in the window with the configuration settings, we remove the checkmark near the “safe mode”.

As you can see, this is a very simple and working method.

What is downloading in safe mode in Windows 10

When you boot into a safe mode in Windows 10, the operating system displays the minimum user intese, and this requires only the main services and drivers. This mode simplifies the elimination of problems, since it does not upload files that may lead to Windows failure.

If you want to know all the methods that can be used to launch Windows 10 in safe mode, read this guide until the end. Firstly, we will talk about what to do if you can no longer enter Windows 10, and then what to do when you can do it in Windows 10. If you cannot download Windows 10, read the methods from 1 to 4. If you can enter Windows 10, reading methods from 5 to 7. The eighth method works only on computers with old equipment.

Use Shift Restart on the Windows 10 entrance screen

If you cannot enter Windows 10, but you can get to the system entrance screen, press and hold the Shift key on the keyboard. When pressing this key, click or tap the “Nutrition” button, and in the menu opened, click “Restart”.

Downloading Windows 10 Safe mode from the entrance screen into the system

Windows 10 will restart and ask you to choose the option. Select “Elimination of problems”.

On the screen “Elimination of problems”, go to the “Search and Elimination of Faults” item.

Access to the advanced parameters for eliminating problems

On the screen “Additional parameters”, select “Launch Options”. Depending on your computer with Windows 10, you may not see this option first. If you do not, click or tap the link, which says ” about recovery options”.

Finally, click on the “launch parameters” item.

Windows 10 says that you can restart the device to change the additional loading parameters, including turning on a safe mode. Click “restart”.

After rebooting Windows 10, you can choose which download parameters you want to enable. To get into safe mode, you have three different options:

uefi, bios, enter, safe, mode, enable
  • Standard safe mode. press button 4 or F4 key on the keyboard to run it;
  • Safe mode using the network. press 5 or F5;
  • Safe mode with command line. click either 6 or F6.

List of download parameters in Windows 10

Log in the safe Windows 10 mode with the user account with the rights of the administrator and follow the necessary changes.

Through three times in a row, interrupt the usual Windows 10 loading process

If Windows 10 cannot boot normally three times in a row, open for the fourth time when it is default in automatic recovery mode. Using this parameter, you can boot into a safe mode. To run the automatic recovery mode, you must interrupt the usual loading process three times in a row: use the “reset” or “power” button on the PC from Windows 10 to stop it during the boot before it completes the Windows 10 loading. If you use the “Food” button, you may need to keep it pressed for at least 4 seconds to turn off the power. When Windows 10 goes into automatic recovery mode, the first thing you see is a screen that states that the operating system “Preparation of automatic repair”.

uefi, bios, enter, safe, mode, enable

Preparation of automatic recovery Windows 10

Then you may be asked to choose an account to continue. Select an administrator account account and enter its password. If you are not asking for this information, go to the next step.

Wait for Windows 10 to try to automatically diagnose your PC.

PC diagnostics with Windows 10

On the screen “Automatic recovery” click the “Additional Parameters” button.

Access to the advanced parameters for eliminating problems

Then select “Search and elimination of faults”.

Selection of search and elimination of faults

Here, the steps that you must take are the same as those that we showed in the first method from this leadership. Follow the path “Additional parameters. Launch parameters. Reboot”. Then click the 4 or F4 keyboard on the keyboard loading into a minimum safe mode, click 5 or F5 to download a “safe mode” or click 6 or F6 to go to a “safe mode with command line”.

Use the Windows 10 installation disk and command line

If you have an installation of Windows 10 or a USB-drive setting, or if you can create it right now, you can use it to download your broken PC from Windows 10 into safe mode. To create a Windows 10 installation disk, follow this manual on another PC: how to create a Windows 10 installation media (on a USB-drive) or upload an ISO free file. Then use it to download your broken PC from Windows 10 and wait for the installation environment loading. Select the language and layout of the keyboard that you prefer, and click or tap “Next”.

How to start Windows 10 in Safe Mode

Windows 10 setting up

Click or tap the link that says the “restoration of the system” in the lower left corner of the screen.

Windows 10 recovery

When you are asked what option you prefer, select “Diagnostics”.

Menu Diagnostics in Windows 10

On the “Additional Parameters” screen, click or tap the “command line (use the command line for an extended search for faults)”.

Launching command strings in Windows 10

In the command line window, enter the command: BCDEDIT / SET SAFEBOOT Minimum. Click Enter on the keyboard, and after some time he tells you that “the operation is successfully completed”.

Activation of a safe mode from the command line in Windows 10

Close the command line and click “Continue” on the next screen.

Continuation of work with Windows 10

After rebooting the Windows 10 computer, it goes into safe mode. Enter the system with the user’s account with the rights of the administrator and follow the necessary changes.

Important: the problem with this method is that it tells Windows 10 to automatically enter the safe mode, every time you run it until you inform about this. To turn off this parameter and start Windows 10 again, complete the same procedure again and enter the command: BCDEDIT / DeLETEVALUE SAFEBOOT.

Loading in safe mode using CD/DVD to restore the system (only for Windows 8)

In Windows 8, but not in Windows 8.1, you can create a system of system recovery. So, if you have such a disk, you can download from it.

After loading from the recovery disk, you will be invited to choose a keyboard layout. Choose the one you want to use. Then you will see the option screen. All further steps will be identical to those that are scheduled in method 2.

Loading in safe mode using USB to restore the system

Windows 8 and Windows 8.1 allows you to create a system recovery disk on a USB carrier. Detailed instructions can be found at the link. Using such a disk, you can also load the OS in safe mode. To do this, load from your USB system recovery and follow the instructions from the previous method.

How to Disable UEFI Secure Boot in Windows 10

Windows launch in safe mode

Now it would be useful to find out how to enter the safe Windows mode.

Options and ways to get into safe mode may vary depending on the version of your operating system. Consider the main ways to enter the safe Windows mode.

Ⅰ enter safe mode with hot keys

This method is suitable only for old versions of the Windows system (in the case of Windows 8/8.1 and Windows 10 The method will only work if the system is installed on Legacy BIOS. not for the new UEFI BIOS). You can use it if you need to get into the safe mode of Windows XP, Windows Vista or Windows 7, or Windows 8/8.1 and Windows 10 with Legacy BIOS. Turn off the computer. Press the power button and then knock on the F8 key several times (or F4, less often. Other options, depending on the manufacturer of the motherboard/laptop) on the keyboard. In the case of Windows 8/8.1 and Windows 10 on UEFI BIOS you can try to use the F8 key (F10, F4 or others), but we’ll talk about this below. Before us will appear a menu with additional loading options

By pressing the buttons with the up/down on the keyboard, we get to the point of safe mode and press the Enter key

Ⅱ Enter safe mode through system configuration

This option is suitable for entering the safe mode of all existing Windows operating systems. On the computer, we run the utility by going into the start. All programs. Standard ones (in Windows 10, the utility is in the catalog of officials), or by clamping the start key on the keyboard (on some keyboards it is marked as Win) and R. In the window opened, we drive the command

and click on the Enter key.

On Windows XP in the new window, go to the Boot tab.Ini and in the field setting parameters, put a checkmark opposite the /safeboot. Click the OK button.

On new versions of the operating system, Windows Vista, Windows 7, Windows 8/8.1 and Windows 10 System configuration window will look a little different

Now we reboot the computer. The system will start in safe mode. Only you need to keep in mind that after that with each rebooting Windows will start in safe mode. To avoid this, you need to go into the system settings again and remove the checkplace from the item safe mode

Ⅲ Enter safe mode through recovery parameters

This path is suitable in order to launch in safe mode Windows 8/8.1 and Windows 10.

So, first we need to enable the regime of the recovery of the system. This can be done both from Windows parameters and from the completion menu:

After that, you will see a window for choosing an action where you will need to go to search and correction of faults

We wait for the computer rebooting and see a window with launch options

Here you see a scheme for compliance with the F1-F12 line buttons on the keyboard and Windows launch options. To get into safe mode, we need to press the F4 key

Enter safe command line mode

The next method is suitable for users who are not afraid to use the Windows command line. He also works on all versions of the operating system, up to the latest today. Windows 10.

We launch the command line on behalf of the administrator

  • On Windows XP, Windows Vista and Windows 7 systems, this can be done from the Start menu. All programs. Standard. For Windows Vista and Windows 7, you need to click the command line with the right mouse button and select the Option Option on behalf of the administrator
  • On Windows 8, Windows 8.1 and Windows 10 can be pressed with the right mouse button on the Start icon on the monitor screen and select the command line (administrator) item)

And press the Enter key

This command can be executed not manually, but from the BAT file created in advance. You can download the finished batnik with this command from the attached file in the ZIP archive: Safemode_on.How to create such executive files described in detail in the article: Batnies (BAT, Batniks) Windows

We reboot the car, wait for the inclusion and see a window that is already familiar to us from the previous method with launch options

Working in safe mode Windows

We examined the main methods that can help you open Windows in safe mode. Then you need to act depending on the reasons forced you to launch the system in this way.

If you have problems turning on the computer after installing a program or driver of the device, then you need to remove the problematic software from the Windows auto load, how to do this in detail in the record: Automobile load. Adding applications to Windows Automatic loading. You may have to completely delete an unstable program from a computer according to the instructions set forth in the recording of programs in safe Windows mode

If the system failures are caused by a viral attack, then it is necessary to scan the computer with an antiviral utility and get rid of the malware found.

What is it and why

Safe download in Windows 10 is a prerequisite for Windows 11. This is a safety function, which is built into most of the modern equipment and firmware UEFI. Its functions include ensuring a safe environment to launch Windows and prevent the penetration of malware.

The use of Secure Boot allows you to protect the system from malicious code, as well as to limit the OS list. In most modern systems, such an option is. In this case, the state of safe loading is not supported for Windows 11 only on old devices. If necessary, it can be turned on.

Do not confuse Secure Boot with another option. Safe Mode. The question of how to launch Windows 11 in a safe mode may occur if it is necessary to diagnose the system. It is used to correct various errors in the operating system. In this case, the minimum number of elements is loaded into the OS.

Frequent problems and solutions

In most cases, going into safe mode is not difficult. If any of the methods has not worked, you can use the following, etc. D. If you fail to enter Safe Mode, you may need to delete the Faceit file, due to which an error often occurs.

In the case of Secure Boot, it is increasingly complicated, because such an option is either supported by equipment or not. In the first case, it must be turned on, and in the second. bypass the check or install a newer “iron”.

Now you know why the special mode for Windows 11 and safe download, how to turn on, and what functions it performs. In the Комментарии и мнения владельцев, tell us if you had to face such a task that you need for this, and what options are there.

Klavi combinations from BIOS manufacturers

Ami (American Megatrends, Inc) BIOS Del, f2, f1
AMD (Advanced Micro Devices, Inc) BIOS F1
Alr (Advanced Logic Research, Inc) F2, CTRLLTESC, CtrLaltDel
Award BIOS DEL, CTRLALTESC
Phoenix BIOS Del, for old models CtrLaltes, CtrLalts, CtrLaltins
DTK (Datatech Enterprises CO) BIOS ESC
PC Acer F1, CTRLLTESC
TOSHIBA laptops F1, ESC, or F12
Lenovo laptops CtrLaltins, CtrLaltf3, or FNF1
Sony laptops F1, F2, F3
HP laptops F9, or F10
Samsung laptops ESC
Dell laptops F12
Old Dell models FNESC, FNF1
Some Dell models Press the Reset button twice
AST CTRLALTESC, CTRLLTDEL
Compaq F1, F2, F10, DEL
Compusa Del
Cybermax ESC
Eisa CtrLalts, CTRLLTESC
Fujitsu F12
Emachines F2, Tab, Del
Hewlett-Parkard (HP) F1, F2, ESC, F10, F12
IBM F1, F2
IBM E-Pro Laptop F2
IBM PS/2 CtrLaltins, CtrLaltDel
IBM ThinkPad Hold the F1 key, or CtrLaltins
Mircon F1, F2, Del
Sharp F2
NEC F2, F1
Shuttle F2, del
Microid Research Mr Bios F1
Packard Bell F1, F2, Del
Tandon Ctrlshiftesc
Zenith CtrLaltins
Sony VAIO F2, F3
TIGET ESC, Del, F1
Roverbook Del

In some modern laptops to enter the BIOS settings, manufacturers added a fn key press, that is, for example, instead of the F2 key, now you need to click the FNF2 key combination.

Also, you can see options for entering the BIOS settings in the instructions for your system board or find and download on the Internet the service manual of your laptop.

How to enter BIOS UEFI using additional boot options

This method is applicable if the system (maternal) fee is equipped with the BIOS UEFI integer and the Windows 8, Windows 8 operating system is used.1 and Windows 10.

If you are faced with the situation when you do not have time to press the BIOS entry key when you turn on the computer, then you can enter the BIOS UEFI settings using additional loading options (recovery environment).

To do this, on the entrance screen into the system or in the Start menu, press the switch button and, holding the SHIFT key on the keyboard, select the reboot item.

After rebooting the computer, on the screen “Choosing” Action “, select the search and elimination of faults

Next on the “Diagnostics” screen, select additional parameters.

In the “Additional Parameters” window, select the parameters built by UEFI

In the next window, press the restart button.

After that, the computer will be uploaded to UEFI BIOS.

There are quite a few options for entering the BIOS settings and they depend on manufacturers of computers, laptops and system boards. You can add this article to bookmarks so that in the future, if necessary, see how to enter the BIOS settings for various devices.

Turn on safe loading

To enable secure boot, enter the settings of the built.in UEFI and select Advanced or press the F7 key

Then, in Advanced Mode, go to the Boot tab and select the safe loading menu parameter

In the safe load menu, select the key control parameter.

Then select the installation of keys of safe loading by default.

Confirm the installation of the keys of the safe load by default by pressing the YES button.

uefi, bios, enter, safe, mode, enable

Now you need to save changes, for this go to the Exit tab and select the Save Changes Reset option.

Confirm the preservation of the changed parameters and after rebooting the computer, the safe load mode will be turned on.

Loading in safe mode Windows 10 via “Parameters”

The download in safe Windows 10 mode is not a heavy action and will be able to even beginners.

How to download in safe mode Windows 10:

  • Open the Start menu and run the “Parameters”
  • Go to “Update and Security”. “Restoration”
  • In the block “Special loading options”, click “Reload now”.
  • After rebooting the computer, you will see the screen of the system loading, select the appropriate option in it and press the corresponding key (F1-F9)

This is one of the simplest loading methods in the safe mode of Windows 10. Now you know how to download in safe mode 10 version of Windows.

What is a safe mode and why it is needed

This is a special type of system launch when only the most important drivers are loaded. That is, no programs will be launched, only a system and only a few firewood necessary for Windows work. The user can choose, launch a mode with or without network drivers support.

If we talk about why you need a safe mode, it is most often used when malfunctions begin after installing certain programs or drivers. There you can delete various components and reboot the computer into a normal mode to understand what exactly entailed failures.