What to do if your iPhone hangs on apple

Put your iPhone into recovery mode and restore it with iTunes.

Step 1 Connect your iPhone to your computer while iTunes is running.

Step 2 Press and hold the power button and home button together. Make sure you don’t let go of the buttons until you get the iTunes logo on your iPhone screen.

Step 3 You’ll see a message from iTunes asking you to restore or update your iPhone before it can be used with iTunes. Then you should restore your iPhone now.

The device does not respond at all

If your iPhone 8, iPhone 8 Plus or iPhone X isn’t responding at all, it just hangs and shows a static picture or just a dark screen, you need a restart.

In this case, you shouldn’t lose any data you’ve been working on if the corresponding software has an auto-save feature. And there will definitely be no iPhone reset.

On iPhone 8, 8 Plus, X press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.

If you’re using your iPhone 7 or 7 Plus, press and hold the power button and volume down button for ten seconds or longer until the Apple logo.

If you’re using an iPhone 6s, 6s Plus, or older models, press and hold the home button and power button simultaneously for ten seconds or longer until the Apple logo.

Checking the plumes

A rare, but no less important, reason can be the fact that the cable flew out of the connector. Then you need to do the following: open the case and check if all the parts are in place (to do this just find a picture of the correct circuit diagram and check it).

your, iphone, hangs, apple

If so, it is recommended that you do the following: start snapping all the connectors with the stubs one by one. After carefully closing the case and checking that the mobile is working.

How to restart your iPhone if it’s frozen on the Apple logo — Apple Support

To do a recovery or update your iPhone on a Mac with macOS Catalina:

  • Connect your iPhone and Mac via Lightning/USB cable.
  • The “Trust this device” prompt appears on your iPhone, click “OK.
  • Open the “Finder” in the section “Places” an iPhone icon will appear.
  • Click on “Finder” on the item iPhone, all information will open, where you have the opportunity to make a backup, update or restore the iPhone.
  • Follow all the steps that we have described as for iTunes.

If our tips didn’t help you, there’s a 95% chance that your iPhone on Apple is hung up because of internal mechanical damage. In such a situation you need to go to a service center. It is best of course to go to an official or certified Apple service.

See also  How to install the clock on your phone screen

What to do if iPhone or iPad hangs on apple after iOS 15 update- 3 ways

Not everyone can successfully download and install iOS 15 on their iPhone and iPad. Some users have encountered problems during the update process. The most common problem is iPhone hung on apple, and will not recover normally after iOS 15 update. Don’t worry about it, it’s still not that bad. Here are 3 ways you can fix the problem. iPhone hangs on apple logo without data loss when upgrading to a new system.

What to do if your iPhone 13/12 hangs on apple?

One of the most common crashes on iPhones is hanging on the Apple logo. If when you turn on or restart your phone, you see a white apple icon on the screen for quite a long time and nothing changes, it means that you are in this situation. Some users have also noted cases where the iPhone 12 hangs on the apple with a streak, like when installing a system update. These types of errors can occur as a result of downloading virus software, due to a corrupted update file for apps or iOS, or after a system crash. In this article, we will break down in detail what you should do if your iPhone 12 hangs on apple, and provide step-by-step instructions for the best ways to solve this problem.

What to do if your iPhone won’t boot (White Apple or Eternal Daisy problem)

All jailbreak enthusiasts have faced the problem more than once, when after rebooting the device or just a system failure, the phone refused to boot. The crash can occur at different stages of booting. Sometimes it’s a hung apple, and sometimes it’s a constantly spinning daisy. Today I will tell you how you can get everything back to working order without much loss.

So, we have a jailbroken iPhone which refuses to boot. This situation can occur as a result of several actions:

I would like to point out right away that the easiest way out is to re-flash the device and jailbreak it again. This option can not always suit you, because of the possibility to lose some data, programs, photos, music. Even if you use our instructions and make regular backups, reflashing and data recovery can be very time-consuming.

Our firmware is not so-called builds. Т.е. Nothing is changed or added to them except for a modem of the right version. If you downloaded the build from another location, it may contain some tweaks or innovations and may be deleted at the discretion of the author. Always be careful with such firmware and read the reviews of other users who have already managed to use them. Successful installation of such a build is not a guarantee of its stable operation in the future. Often after installing such firmware it is possible to use the phone for a long time and then reboot it and get the frozen device. If you have exactly this case, most likely only reflashing to the customized firmware of our production will help you, not assembling with additional software. if tweakkami are not compatible, identify the tweak that caused the problem, to prevent installing it in the future. I recommend to reboot the device after installing each tweak. Yes, someone will say that it is not necessary and it’s time when even Windows asked to restart after installing any program, but I will answer that it is the most reliable way to detect problematic tweaks.

See also  How to block the phone number on a Nokia

If you are a fan of poking around in the file system (no matter which program to use iTools, iFunBox or iFile) it is important to remember that you have full access to all the files, changing which can affect the performance. If you are trying to change the graphics by hand, change the inscription on the unlock slider or change the system files, be sure to keep the originals and reboot after the manipulation.

With the reasons that can cause White Apple we have figured out, now let’s talk about how it can be fixed (without reflashing, of course). At first you have to switch off your phone completely by disconnecting it from PC or charging. After this for 40 seconds press the Home and Power buttons. This will make the phone turn off completely. Now we press the Power button and wait for the phone to boot up. In most cases, the failure occurs in the final stage of loading iOS, when the graphical shell is loaded. The rest of modules of the phone are already functional, but it is hard to see it. To understand that the phone is in this stage you need to make an incoming call to it from another phone. If the operator reports that the phone is out of range or turned off it is obvious that the hang-up happened at an earlier stage. If it beeps, the phone is on the final stage of booting, which means you can access its file system.

Now you can use the programs iTools and iFunBox and easily copy any data from the device: applications, photos, music, contacts, messages. Also in this mode you can return the system files back to their place (of course, if there are still originals).

If the issue in your case is not in the problem firmware and not in the replacement of system files, and in the incorrect work of tweeks need to boot your phone in Safe mode. The device enters this mode if there is a software failure or a wrongly installed tweak. In this mode, all tweaks and programs from Cydia are completely disabled and the app store itself is available to run. From personal experience I say that from version to version iOS its stability is increasing and getting into safe mode on my iPhone 4 with iOS 5.1.1 rather rare phenomenon in contrast to the old 3GS with iOS 4.3.3, I’m not talking about the iPhone 2G and iOS 3. Also always pay attention to the warnings of the authors in Cydia on the compatibility of tweaks with versions of iOS.

So you can try to bring your device back to life without the need for firmware and further restoration of everything you need. If these tips do not help you the problem is much more serious and the flashing can not be avoided. However, do not be afraid of it, because the probability of ruining the device is close to zero, thanks to the fact that the boot area is reliably protected from third-party intervention. This means that it is possible to save iDevice by reflashing in most cases.

See also  How to make an iphone backup through a computer

What to do, iPhone hangs on apple after iOS 15 update

Despite the seemingly glitch-free iPhone, iPad and iPod touch, even Apple mobile devices can freeze after updating. iPhone hangs on the apple and does not turn on, this problem is one of the most common and annoying problems that occur in “apple” iPhones. Often the iPhone hangs after downloading or updating, causing the device to be unresponsive and displaying the Apple logo on its screen. In this article we will give you 4 ways to solve this issue for free if your iPhone hangs after updating iOS 12/11//10.

Updating iPhone in Recovery Mode

If a forced reboot does not work, try updating iOS in Recovery Mode. This will allow you to reinstall the operating system without changing the data on the device. However, it is only effective if the screen with logo appeared as a result of a failure during iOS update. If the issue is related to hardware or jailbreak, this method will not help.

You will need a desktop computer with the latest version of iTunes and a USB cable to update iOS in recovery mode.

On the iPhone 7, you can activate recovery mode by simultaneously pressing and holding the power button and volume knob until the smartphone shuts down. Then press and hold down the volume down button on the phone, and connect the iPhone to your computer with iTunes via USB cable. After about 10 seconds, the iPhone screen will display the iTunes logo with the cable, and iTunes on your computer will notify you that iPhone is detected in recovery mode.

On earlier iPhone models you can activate the recovery mode by pressing and holding the Power button and the Home button at the same time until the smartphone shuts down. Then press the Home button on the smartphone, and while holding it, connect your iPhone to your computer with a USB cable with iTunes installed. After about 10 seconds, the iPhone screen will display the iTunes logo with the cable, and iTunes on your computer will notify you that the iPhone is detected in recovery mode.

your, iphone, hangs, apple

The above steps will update the firmware of the device. If the logo screen does not disappear, repeat everything again, but select “Restore”. Note that in this case, all settings of the iPhone will be reset to factory (all data will be deleted). You can restore them from backups.