Why is AirDrop not working between iPhone. How to eliminate Airdrop…

If Airdrop has stopped working on yours on your iPhone and you want to turn it on, then we recommend that you do the following. Restart Airdrop on both devices if it still does not work, restart the devices and check if the functions of Continiity and Transfer are included on the iPhone. In the transfer settings find who has access to synchronization.

All modern Apple devices running iOS and MacOS are equipped with AirDrop file exchange systems. Since the closed IOS structure does not allow working with Bluetooth directly, the main goal of Airdrop is to replace the file system when exchanging media files in the Apple ecosystem.

What you need for AirDrop

iPhone X can transmit and receive files from any device running iOS 7 and OS X 10.10 and later versions. The exception is the iPhone 4/4 and Mac computers released before 2012. Airdrop is available in Mac OS X from version 10.7, but the transfer of files between iOS and OS X is possible only in Yosemite and more new versions. Except:

  • Wi-Fi and Bluetooth should be included on both devices. Both devices should be within the reach of these intenses;
  • To receive the file, add a phone number or the sender’s email address to your contact list;
  • The modem mode should be disconnected;
  • To get a file, Airdrop must be configured to receive.

Attention! If Airdrop does not work, you need to reinstall iOS, this is a simple correction of the iPhone X software. Other functions necessary for AirDrop are checked during diagnostics (free).

Turning on Airdrop

Perhaps, after the rollback of the system or its update, Airdrop has stopped working, as it is simply disabled. First, make sure that the function is activated. To find out how to enable Airdrop, follow the instructions:

  • Go to your iPhone desktop window;
  • Perform the swipe from below-up to open the pop-up window of the gadget control point;
  • Click on the line Airdrop.

note! After activation of the Airdrop, Wi-Fi and Bluetooth should immediately start. If this does not happen, activate all the options yourself by pressing their icons.

In the process of activating Airdrop, the phone will ask you to indicate the access mode to the iPhone. After choosing an access option, the Airdrop function will be activated. There are two modes:

  • “Only for contacts”. Using this parameter, you can transmit files only between those devices that are already saved in the phone’s contact sheet;
  • “For all”. Allows you to connect to previously unknown devices. Not as safe as the first regime, it is not recommended to use it in public places or transport.

Reasons and decision

In most cases, users use AirDrop incorrectly, so compound and error failures appear when transferring files. Make sure that:

  • The gadgets between which the network is created are no more than 8 meters from each other;
  • The connection to the same Wi-Fi or Bluetooth network has been created;
  • You activated the data transmission services Wi-Fi and Bluetooth when you included Airdrop on your iPhone;
  • Both gadgets are not blocked.

If you are faced with the fact that Airdrop does not see the iPhone, you need to check the smartphone settings. Disconnect the modem mode if it is activated on the device. Go to the “Settings” window. “Modem mode” and deactivate the slider.

After that, restart Airdrop on both devices and try to connect again.

If a computer with Airdrop does not see the iPhone, perhaps the device was removed from the contact list or the cell call function was disconnected. To work with ignorant devices, choose an access mode “For all” in the AirDrop launch window.

IPhone cell calls function (another name. Continuity) allows you to use the network of a mobile operator to connect with all gadgets that are tied to your iCloud account if they are connected to one router. If this option is disconnected, you will not be able to install the Airdrop connection with related devices in the “only contacts” mode. Activation of Continiity on your iPhone is available in the “Settings” window- “Face Time”- “cell calls”.

First solution: soft discharge.

The simplest possible solution of small software errors and failures, including those that affect the iPhone wireless functions, is a software reset or reboot of the device. It effectively eliminates fraudulent applications, data damage and other problems related to software that suddenly appear on your phone. Performing software discharge on iOS devices is also a way to clean the memory cache and damaged files from internal memory without prejudice to any important data stored in internal memory. If you have not done this yet, then you should consider the possibility of mild discharge as the first bypass path. This is how it is done:

  • Press and hold the Side / Power button and any volume buttons at the same time for several seconds.
  • Release the buttons when the Slide to Power Off command appears.
  • Draise the slope of turning off the power to the right.
  • After 30 seconds, press and hold the power button or the side button again until the phone reloads.

Allow the device to completely boot, then repeat the attempt to exchange files via Airdrop and see if it is working now.

airdrop, working, iphone, eliminate

Second solution: Street in flight mode.

It is also proven that this old trick works miracles when solving minor problems affecting iPhone wireless functions. This works, giving a quick restart and update for wireless radio stations and functions, including Bluetooth and Wi-Fi. This is how it is done:

  • On the main screen, click “Settings”.
  • Select the flight mode, then switch the switch to turn on the flight mode. This turns off the wireless radio stations of your iPhone.
  • When the flight mode is enabled, restart (software reset) iPhone XR.
  • Then return to the “Settings” menu. “Flight mode”, then switch the switch to turn off the flight mode again.

Wait until your iPhone restores Wi-Fi and Bluetooth connections, then repeat the attempt using AirDrop to make sure that the problem is eliminated.

Also check and make sure that the “Do not Breat” function is disconnected on iPhone and Airdrop devices. Do not disturb can disable Airdrop notification delivery. As a result, you will not be able to see or respond to any AirDrop request. Your device can also be inaccessible to detection, but you still send information through Airdrop.

To access the settings “Do not bother” on your iPhone XR and control them, open the control center, then click the “Do not disturb” icon (quarter of the moon / crescent) to turn off the function if necessary.

Then try to send files via Airdrop and see if it works as planned.

Airdrop does not work on iPhone 12

If you experience problems with the exchange of files via Airdrop using the iPhone 12 are usually easily solved and do not take much time.

Before you do anything else, check the AirDrop settings.

Sometimes all you need to do is turn off and turn on both settings again. To do this, just draw up and tap the wi-fi and Bluetooth icons on the main screen and make sure that they are both highlighted, indicating that they are included.

If the above decisions do not bring the desired result, you may have to complete a full reloading. This is how it is done:

  • Using the volume increase button, press and quickly release, and then do the same for the volume reduction button
  • Then click and hold the “VCL/Off” button on the phone side panel.
  • As soon as your phone turns off and turns off, turn it on again by clicking the “VKL/stop” button button.

If you use the old Bluetooth version, a simple update can solve your problem with the exchange of files in Airdrop. To update the current Bluetooth version, follow the following actions:

AirDrop Not Working on iPhone? 6 Methods to Fix It! [2021]

If Airdrop does not work on the iPad, the problem may be associated with outdated iOS. To check the presence of the latest updates, follow the following actions:

If your iPad has the last FI and Bluetooth settings. that’s all you need to do so that AirDrop can share a file.

If Airdrop does not work again, check your settings.

These steps guarantee that you can send and receive Airdrop files from anyone, and not just from people listed as contact.

If none of the methods described above works, you may have to forcefully restart the iPad.

To do this, follow the following actions:

  • Press and hold the on/off button.
  • Когда “ползунок отключения питания” появится, сдвиньте его в выключенное положение.
  • Reload the iPad.

Fixed, Airdrop does not work on the iPhone 8 or 8 Plus

As we have already mentioned, check whether Airdrop is included for contacts or for everyone or not. Then turn on Airdrop from the control center. Now make sure that Bluetooth or Wi-Fi is included on your iPhone so that the AirDrop function works correctly. Another Airdrop support device should be active, which means that the display should be turned on. You still cannot use the free distribution correctly? Follow the possible bypass paths here.

Soft reboot iPhone 8

  • Press and hold the power button / side button button to increase or decrease volume for several seconds.
  • A strip of transition to turning off power will appear. Release both buttons.
  • Drag the slider to turn off the iPhone.
  • After waiting for about 30 seconds, press and hold for a few seconds the power button / side.
  • Then the Apple logo will appear and release the button.
  • The iPhone will reboot.

Use flight mode

  • Open the settings menu. Turn on the flight mode switch.
  • In this case, all network connections on your device will be disconnected.
  • Now wait a few seconds and turn off the flight mode.
  • Turn on the Internet connection and check Airdrop again, whether it works or not.

Get out of the iCloud account and enter again

  • Open the iPhone settings click on iCloud.
  • Select your iCloud identifier and click “Exit”.
  • Now restart the iPhone, go to the iCloud account settings enter it.
  • Then check Airdrop again.

Reset the network settings

  • On the main screen go to the settings menu. Click on common ones. Click on the discharge.
  • Click on the network settings.
  • When a request appears, enter a password and continue.
  • Finally, reboot the iPhone.

Check the iOS update

  • To check the iOS update, go to the device settings. Go to the general. Go to software update.
  • Make sure the mobile Internet or Wi-Fi network is connected.
  • If an update is available for your device, just load it by loading and installing it.
  • After that, your device will reboot into a new system.
  • Finally, go to Airdrop and check if the problem is solved or not.

That’s all, it was the easiest way to fix it if Airdrop does not work on the iPhone 8 or 8 Plus. You have problems or problems with your iPhone 8 Series? Then there is nothing to worry about, we have an article devoted to the problems and manuals of the iPhone 8. Here the guide to eliminate the iPhone 8. Although this rarely happens, in some cases, problems on Apple devices may be related to faulty equipment. If the reset to the factory settings does not help to solve your problem, visit the local Apple Store or service center so that a qualified specialist could check the equipment. If necessary, they can send it for repair or replacement.

You have an iPhone 8 or any other Apple device, and you need such simple lessons? Then follow the updates of the advice and techniques of GetdroidTips for the iPhone column, because soon a lot of simple poco manuals will appear.

If you have any questions about this, the section of Комментарии и мнения владельцев is always available to you.

  • How to fix the problem of delaying an incoming call to the iPhone 8 or 8 Plus
  • How to configure and gain access to visual voice mail on the iPhone 8 or 8 Plus
  • How to fix the Imessage activation error on the iPhone 8 or 8 Plus
  • How to fix problems with overheating in iPhone 8 or 8 plus
  • iPhone 8 stuck on the Apple logo. How to fix the problem with the loading cycle on the iPhone 8 or 8 plus
  • How to enter and get out of the DFU mode on the iPhone 8 or 8 Plus

Hi, I’m Shekhar Vaidia, a blogger, a student studying CS and programming.

The reasons and ways to eliminate problems

It may happen that during the next attempt to use this method of data transfer, you cannot find the Airdrop icon, despite the fact that you are correctly entering the “control center”, doing all the manipulations that used to lead to a positive result. And also sometimes you have to face the fact that the devices that you are trying to “connect” for successful exchange of photographs simply do not see each other.

Fix Airdrop Not Working On iPhone After iOS 16 Update. Airdrop Sending Or Receiving Problems Fix

If you had to face such incomprehensible problems, you stalled at a “even” place, we suggest that you do not stand, but move forward in the direction of eliminating misunderstandings. We will help you understand the reasons for the failure and how to eliminate such problems.

ATTENTION. However, before starting the described actions, we recommend that you still check your devices for compliance with their technical requirements. If Airdrop does not work, it is quite possible that one of the devices that did not previously participate in such data transmission simply has an outdated modification. In this case, you will have to look for other ways to solve the problem.

Search for a missing icon

Most often, the Airdrop icon is absent on the new iPhone, on which until this moment such a function was not activated. It is for beginners for this reason that they often have to face such a problem. However, experienced users sometimes get into such “networks” when they purchase a new gadget. Being confident that they are well versed in how to connect the Airdrop function, they begin to carry out traditional actions, when they suddenly notice the absence of the icon, so they do not know how to move on. The owners of the new device are perplexed why such a technical obstacle arose on their device.

Do not rush to panic, believing that you have purchased a device with a marriage, it is not so difficult to eliminate the problem. We recommend that you go to the “Basic Settings” of your iPhone, there to familiarize yourself with all the above items, the choice to stop at the “Restrictions” item. Here you can find the Airdrop parameter, there will be a special toggle switch opposite it, you need to turn it on it.

Now re.enter the “control center”. Most likely, you will find the desired Airdrop icon. If the “miracle” did not happen, it is too early to panic, just restart your device. Often gadgets accept any changes only after rebooting. In many cases, after such manipulations, two devices, one of which is Mac, begin to see each other, and a successful connection is established between them for data transfer.

If Airdrop does not work, this will bring us a lot of troubles when you want to share something between the devices, you can find that the program has not been successful or the data was not complete. over, there are many problems that will lead to AirDrop errors.

Therefore, in order to effectively fix this, it is important to first carry out the elimination of problems. When you find that errors may come from your iOS/Mac devices, follow the repair tips for your device.

In addition, if you, before correcting the error, transmit data directly to the cable, DR.Fone will help you transfer data from the phone to the phone or from the phone to the desktop.

Now you are ready to cope with AirDrop. Does not work, just do it!

This is the name

This can be caused by the fact that Wi-Fi and Bluetooth do not work on your Mac. Perhaps the data is not allowed to transmit through Airdrop, for example, you can only on Apple Music.

To understand exactly what is happening, read the quick elimination of problems.

Although Apple does not announce the restrictions for Airdrop, we do not recommend sharing too much data using Airdrop, since there are users who inform that they cannot share a file of more than 3 GB or share more than 200 images at a time

If you want to smoothly and steadily transmit data without limits by size/quantity, you will need to transfer data via DR.Fone.

Action Airdrop to eliminate the iPhone 11/11 Pro / 11 Pro Max

As we have already mentioned, check whether Airdrop is included for contacts or for everyone or not. Then turn on Airdrop from the control center. Now make sure that Bluetooth or Wi-Fi is included on your iPhone so that the AirDrop function works correctly. Another Airdrop support device should be active, which means that the display should be turned on. You still cannot use the free distribution correctly? Follow the possible bypass paths here.

  • Hold the power button / side button button to increase or decrease the volume for several seconds pressed.
  • A strip of transition to turning off power will appear. Release both buttons.
  • Drag the slider to turn off the iPhone.
  • After waiting for about 30 seconds, press and hold for a few seconds the power button / side.
  • Then the Apple logo will appear and release the button.
  • The iPhone will reboot.

Use flight mode

  • Open the settings menu. Turn on the flight mode switch.
  • In this case, all network connections on your device will be disconnected.
  • Now wait a few seconds and turn off the flight mode.
  • Turn on the Internet connection and check Airdrop again whether it works or not.
  • Open the iPhone settings click on iCloud.
  • Select your iCloud identifier and click “Exit”.
  • Now restart the iPhone, go to the iCloud account settings enter it.
  • Then check Airdrop again.

How to use Airdrop on iPhone and other mobile iOS devices

To transmit data from iPhone to Mac, the following actions must be performed:

airdrop, working, iphone, eliminate
  • Open the control point, turn on this option, in parallel with it should be activated by Bluetooth and Wi-Fi;
  • Further, a window will unfold with a choice for whom to open access “for all” or “only for contacts”. Do not use the first option in public places, this is fraught with unauthorized access to your personal information;
  • Select the file that you want to throw and click on the “share” button;
  • Then the menu will open with the choice of contact for which files will be transferred. After choosing the addressee, he will receive a notification with the proposal to accept the file, after the agreement will begin to throw data from the iPhone or MacBook.
airdrop, working, iphone, eliminate

A malfunction can manifest itself from different angles, for example, in the process of a new attempt to throw a photo or some information, the user notes that the transfer does not happen: Apple devices do not see each other. And the label of the application from the operating system may also disappear, which is also a frequent event.

I immediately want to indicate that if your phone is not updated to the latest official version of iOS or you use MacBook over 2008, most likely, it will not be possible to solve the problem of transferring files by air, due to technology incompatibility. But if these restrictions are not related to you, then we will consider two options for a malfunction:

The label of the application disappeared from the control center

This often happens with new devices, when trying to set up information on them. A similar problem is solved quite easily, you need to go to the “Settings” menu, select the “Basic” item, find the “Restrictions” superstructure there, where you need to move the toggard to the right side to activate the AirDrop option. But what to do if the function does not work even after such manipulations? Everything is simple! Reload the iPhone again and check the presence of the icon at the control center.

Apple devices do not see each other

First you should enable and turn off Airdrop on both gadgets, restart them and check if the Continum and Handoff functions are included. It is also necessary to check for who is open synchronization access. This can be done by going into the transmission settings, there are two detection options: “visible for everyone” or “only for contacts”.

If you did all this, but the devices have not found each other, then gadgets cannot create a couple on Bluetooth or through a single router. Although the developers say that when setting up the data exchange options, all the previously used account parameters are preserved, including the list of synchronized devices, in practice everything is a little different.

It is necessary to create a new Bluetooth pair

  • Check Bluetooth activity on both gadgets.
  • Go to the Bluetooth system settings on Mac.
  • Use the search for devices and when your device appears on the list, create a couple.
  • Confirm the actions of the input of the security code that the computer will offer for the connected phone.