The sound was missing on the iPhone. Reasons and what to do
If the iPhone is missing, then it is normal to use it normally. You can usually diagnose and eliminate the cause yourself, but sometimes you have to contact the service for repairing the device.
There is no sound on the iPhone anywhere or when performing certain actions due to the following reasons:
If the user can cope with a software error independently, then a mechanical breakdown, because of which, for example, there is no sound on the iPhone during conversation, is eliminated only in the service center. If moisture gets, it is recommended to immediately contact specialists and not try to dry the phone on your own.
How to turn off a soundless regime
If you do not hear the sound of a call on your iPhone, the first thing you need to check whether a soundless mode is included. As a rule, it is he who becomes the main reason for the problem.
On Apple iPhone, the transition between modes is carried out using a special switch, which is located on the left end of the case. Pay attention to how the switch looks like in ordinary and silent mode.
Also, the transition to silent mode is carried out by lowering the volume to the minimum level using two side buttons that are under the switch.
For the appearance of sound, a reboot is required
When the volume switch is located in the required position, and the melody does not sound anyway, perhaps your gadget needs a reboot. The implementation of the reboot will solve software errors that influenced the disappearance of Rington. To do this, click and hold the Home buttons simultaneously until the logo in the form of an apple is displayed.
On the iPhone 7 and 7 plus you should clamp the buttons to reduce the volume and power.
Iphone Xs Max No Sound During The Calls Fix.
If the disappearance of the sound is associated with a programmatic error, then after such a reboot, it should again appear.
Remember that the lack of sound on the iPhone is, albeit an unpleasant, but quite solved problem. We hope that this article answered the question why the iPhone has disappeared and how to solve the problem on its own. If the reason for the lack of sound has become hardware breakdown, the user capabilities are actually limited. You can try to clean the connector, but it is important not to overdo it.
Когда возникают неполадки программного характера, восстановить звук намного проще. It is enough to restart the device, remove the problem application or roll back to factory settings. If you already had to deal with such malfunctions, write in the Комментарии и мнения владельцев how you eliminated them.
No sound with an incoming call to the iPhone
We will try to make out all the ways to solve this problem.
The simplest and in many cases is the reloading of a mobile phone.Just reboot the phone.If this action did not help, then it is worth paying attention to the fact that the regime is set.It is likely that a soundless regime has been established.
It sounds a little funny and strange, but often newcomers come across this.This category of lack of sound also attributes the activated “do not disturb” mode, blocking all sound accompaniment.
Also, sound problems could arise due to incorrect settings.In order to eliminate this problem, open the “settings”, then “sounds” and configure the suitable volume of the rington for yourself.
If the problem is related to the internal support of the mobile device, then try to drop the settings to factory.
To do this, click “Settings”-“main”-“discharge”-“erase content and settings”. If no attempt to eliminate the breakdown has given the result, then you can still try to clean the speaker and headphone jack.
It is necessary to do this as accurately as possible so as not to damage the contacts.The best tool for this business is a toothpick or ear stick.
Well, if no of these procedures has brought success, then you should come to terms with the fact that the gadget must be attributed to repairs.But to use the service center is worth only with good recommendations.
Unfortunately, the frequent causes of the mobile phone malfunctions are not factory marriages, but inaccurate operation of the gadget, if the cause of the breakdown is a factory marriage, which can only be found out after diagnostics, then you have the right to demand from the seller to freely eliminate the mobile phone that is freely eliminated or replaced by the seller.
FIX No Sound In Calls or Mic Not Working On Any IOS Devices
To avoid the occurrence of all of the above problems, it is worth carefully operating the phone and use the services of only official sources.
What to do if there is no sound (disappeared) an incoming call to the iPhone
Despite the fact that the iPhone is a very reliable thing, sometimes users face a sudden disappearance of a melody when calling. An incoming call is carried out, but there is no sound signal, what to do? Below we will tell you how to solve this problem.
Iphone requires a reboot
If the volume switch is in the right position, but the melody still does not sound, perhaps your device requires a reboot. Forced rebooting will correct program errors, due to which the ringtone could disappear. About how to restart the iPhone (4 ways) we talked in this article.
Check the sound settings
It is possible that problems with the ringtone arose due to incorrect sound settings. Open “Settings”, select the “Sounds, Tactile Signals” section and set the volume of the rington and notifications suitable for you. Here you can turn on the “change” buttons, which will adjust the volume of the melody using the volume button on the left side of the iPhone.
There is no sound with an incoming call to the iPhone. The headphone mode is mistaken
If you tried all of the above methods, but not one of them helped, then the problem is somewhat more complicated. For example, your iPhone could be mistakenly stayed in the headset mode. This is easy to check in the application music or control point by pressing the “device” icon.
Try connecting and disconnecting the headphones several times, carefully clean the audio / lightning connector with a toothpick, restart the iPhone.
Eliminating the problem using AssistiveTouch
Open the Settings menu → Universal Access → Contact.
Go to the AssistiveTouch section and activate this function through the corresponding toggle switch. A virtual button with an additional menu will appear on the screen, which can be placed anywhere in the display.
Tap on the AssistiveTouch menu and select “Apparatus” item.
On the right, there should be a “turn off the sound” icon with a crossed bell (if not, translate this function to this position), and slip on the left on the “louder” button (volume increase) to increase the volume of the call.
Disconnect AssistiveTouch for unnecessary.
The problem is related to problems in the IPhone hardware operation, for example, with a speaker
The disappearance of the sound can be caused by the breakdown of some component in the device itself.
For the sake of the experiment, try to reset the settings (settings → Basic → Reset → Wipe out content and settings), and if this procedure has not helped, you can completely exclude a programmatic error by restoring the iPhone through iTunes with the subsequent configuration “As a new”.
If this did not help to return the sound with an incoming call, then going to the service center cannot be avoided. We recommend using the services of only official service centers, of course, if any in your city or country.
Software malfunctions and errors
If you notice that when you call your iPhone, for some reason the sound disappeared, do not panic. There is a chance that everything is not as scary as it seems at first glance.
Most programmatic errors can be eliminated with your own hands. Here you just need to know what to do if the sound unexpectedly disappeared on the iPhone.
“Without sound” mode
There is nothing pleasant that the sound does not work on the iPhone for one reason or another. But sometimes this reason is so banal that the user does not even know how to consider it.
Noticing that there are no melodies of calls or incoming messages, be sure to check if the soundless regime is currently included. On the lateral panel of many iPhone models there is a small switch, which turns on and off all sound alerts with one pressing.
Try to transfer the button to another position, or change the parameters through the settings.
Knocked down settings
If the music in the iPhone audio player is played, but there is no sound with an incoming call, it is very likely that the reason lies in the wrong settings of the notification on the smartphone.
In this situation, it is recommended to try the following option:
Dial your number from another phone, and check if the situation has changed.
If nothing has changed at the same time, you need to further look for potential reasons.
The iPhone has a function of connecting to various wireless devices, including speakers or headphones. It happens that when watching a video or listening to music, everything was fine, but then the sound disappeared.
Remember what gadgets you connected earlier to your smartphone. For example, if you recently used a wireless column, the connection could remain active. And all the sounds that should be reproduced on the iPhone when calling or turning on music are displayed on the speaker of the column.
It is easy to check the surviving connection to another device. For this you need:
Here you can usually break the connection with a wireless column or other similar device where the sound is broadcast.
After the manipulations done by air, you can safely turn off.
One of the possible reasons why there is no sound in games or applications running on the iPhone is a systemic failure.
Despite its cost and status, the iPhone still remains an electronic gadget, a systemic failure in which is practically inevitable.
If, when talking or starting the application, the sound disappears on your iPhone and it does not appear at the next call, but at the same time all the methods presented before have not helped, it is worth thinking about a possible system failure.
In this subject, you can give several recommendations:
- Reboot. When, during a call on an apple mobile device, that is, on the iPhone, the sound suddenly disappeared, it is worth trying from the simplest, but often a very effective solution. Namely from the reloading of the gadget. If the reboot did not give any result, and the sound did not appear, you will have to resort to more serious methods.
- Restoration of the device. To restore the smartphone, you can use the phone itself, or act via PC by installing the iTunes application on it. The easiest way to do this is the first way. Here you need to open the settings, go to the “Basic” section and further to the “Reset” section. Here, click on the “Watch Content and Settings” button and wait for the completion of the procedure.
ATTENTION. Before restoring the iPhone, it is necessary to back up. Otherwise, a number of important and necessary data will disappear.
There are a lot of cases when the user has the sound of a call on the iPhone, and at the same time he does not know what to do. Yes, sometimes you have to go to extreme measures. The restoration of the smartphone to this category is precisely.
The consequences of Jailbreak
This is a hacking file system on a smartphone. The desire to fulfill Jailbreak, especially on the iPhone, is easy to explain quite easily. A number of programs, applications and games for these devices cost a lot of money. To get free access to them, phones are hacking.
But such an intervention threatens not only the loss of a guarantee on a smartphone, but also possible harm from third.Party and hacking software.
Having completed Jailbreak, sometimes you should not be surprised where the sound of a call, video, etc. This happens on different iPhone models, including 6s and more fresh versions of 10-11 generations.
To download applications, games, videos and music, there are official sources such as the App Store and iTunes Store.
Before you get there, all content is thoroughly checked and multiple testing undergoes. This excludes the possibility of viral infection and the occurrence of other problems.
But some users prefer unofficial sources. Working with them, loading from there of different software, leads to the following possible consequences:
- The level of protection of the smartphone from malicious programs is reduced, as a result of which it becomes much easier to infect the system;
- There is a failure in already installed programs and games, and sometimes even from official sources;
- Difficulties and problems are observed during attempts to update software.
In addition, a number of side effects cannot also be excluded, among which the loss of sound during calls and notifications.
If your phone suddenly disappears on your phone, and at the same time, programs or games from dubious sources have recently been loaded on the iPhone, try to delete them and restart the device. There is a high probability that after such actions the problem will leave.
Somewhat reminiscent of a systemic failure. The phone worked, functioned normally, but under the influence of certain factors, and sometimes without any reason, the operating system hung.
Solutions to eliminate sound on iPhone
If you have a problem with a lack of sound on the iPhone, or you are faced with a problem, try the following solutions to solve this problem.
Disconnect the “Do not disturb” mode
The “Do not disturb” function is usually used at a meeting, at the workplace or in the cinema. If you turned on this function intentionally or by chance, there will be no sound on your iPhone at all. There are two ways to disable the “do not disturb” mode on the iPhone.
Open the Appendix settings and choose not to disturb the option. Move the switch manually to the left to turn off this mode.
Spend up from the bottom of the screen to open the control center. Then touch the parameter “not to bother” with the icon of the moon to turn it off. After turning off the “Do not Breat” mode, you can try to play music to check this. (See what to do if “not to bother” does not work)
Try another application
If there is no sound in the iPhone Video application, try another multimedia application. Sometimes the problem of compatibility can lead to the fact that the video application or music application will not work on certain iPhone models.
Make sure you turned off the silence regime. You can find the silence key next to the volume buttons.
Try to adjust the sound volume in all musical and video applications on your iPhone. If in one application you set the sound volume to zero, this will affect other applications.
Feature headphones that do not correspond to the iPhone settings do not play sound and sound. If you do not hear the sound through the headphones, you must remove them or replace them with original headphones.
If there is no sound on the iPhone 7 after removing the headphones, it may be stuck in headphones mode. You can go to the decision 7 to know how to fix the iPhone stuck in the headphones mode.
If Bluetooth is included on your iPhone, it can be connected to another device, for example, to the dynamics of Bluetooth or Apple TV, and the sound will be transmitted to this device. So, you must check and disable “Bluetooth” in the “Settings” application when there is no sound on the iPhone.
Reload the iPhone
In the case of software lock, full restart can clean everything and make the iPhone sound work as usual. The operation is simple. Hold the buttons “Food” and “Home” at the same time, until your iPhone restarts or the Apple logo appears.
This operation is a little complicated, but it can solve the problem of lack of sound on the iPhone.
Step 1 make a backup copy of your data in iCloud or iTunes. Thus, all personal settings and data will be deleted, so it is better to first create a backup copy of the phone.
Step 2 Go to the Settings General Reset. And then drop all the settings.
Step 3 Camping of settings may take some time. When the process is completed, you can restore data on your iPhone.
Correct iPhone in headphones mode
When you took the headphones, you can find that there is no more sound on the iPhone, since iOS was hanging in headphones mode. And if the above solutions do not work, you can try Fonelab. IOS recovery, this can help you get rid of the headphones stuck in the mode. The key feature of this professional IOS recovery tool includes:
- One. He is able to eliminate various factors that may not cause sound on the iPhone, for example, the iPhone is stuck in headphones, the iPhone hung, the blue screen or the iPhone is blocked.
- 2. You can restore the iPhone in recovery mode or in DFU mode depending on the situation.
- 3. This iOS recovery tool operates on all iPhone models, including the iPhone 8/8 Plus / 7/7 Plus / 6 / 6s / 5 / 5s.
- 4. Everyone can use iOS System Recovery on a computer, regardless of what your operating system you have. Windows or Mac OS X.
- 5. Importantly, iOS System Recovery is safe and reliable during the repair of iPhone. He uses a USB cable for communication between iPhone and computer.
- 6. And even newcomers can take advantage of this IPhone recovery tool, as it allows you to restore your iPhone in one click.
The program is able to fix the iPhone stuck in headphones mode.
You can watch the video to learn more about iOS System Recovery:
Based on the analysis above, you must understand various solutions so that there are no problems with the iPhone. Iphone is a packet of high technology. Despite the fact that we enjoy its better performance and excellent functions, it is difficult to determine for what reasons the sound is not played on the iPhone. Fortunately, we summed up the main symptoms of this problem. In addition, we proposed several solutions that will help you get rid of the problem. When you are faced with this problem, you can try solutions one after another to correct it. According to our study, stuck in headphones mode is an important factor leading to the lack of sound on the iPhone. So, we recommend a professional tool for restoring the iPhone, iOS System Recovery. It has a headphone mode that can recognize software errors and correct them automatically.