Why isn’t the speaker working on your iPhone

iPhone 7 speaker and microphone does not work

The iPhone 7 is one of Apple’s most successful smartphones, but it’s also found a serious flaw. Owners of iPhone 7 and 7 Plus complain that the built-in microphone suddenly stops working, and rebooting the device not only does not fix the problem, but also completely kills the smartphone.

According to complaints from Seven users on various forums, the problem occurs only on older devices that are more than two years old. In all cases, the failure occurs unexpectedly, and rebooting the system hangs on the Apple logo.

According to experts from several service centers, the problem lies in the design of the iPhone 7. The device case is quite robust, but is subject to unnoticeable bending: due to permanent deformation, the audio chip comes off the motherboard, and the microphone stops working as a result.

Apple representatives have reported that the company is aware of the problem and is already looking into it, but the number of affected users is very small.

Now owners of broken iPhone 7 have one way out. to go to the service center themselves and pay for repairs, the cost of which is about 100-150 dollars.

Wear and tear

What to do if the sound on your iPhone is lost? It all depends on the circumstances preceding the event. Every phone has its lifetime. At some point the gadget and its components will wear out. This leads to either the phone malfunctioning, or “glitches” on it.

The iPhone has been in use for many years? Then you should not rule out speaker wear and tear. They can either be repaired yourself (to do so is highly discouraged), or give your smartphone to a service center for diagnosis and further repair.

In practice, repaired speakers do not last long. This means that soon the sound on your smartphone will disappear again. Therefore, if the component breaks, it is better to pick up a new phone. On it the sound will work 100%.

speaker, working, your, iphone

The speaker does not work when talking iPhone 6. 5 ways to reanimate the speaker on iPhone 6

The phone is repairable if the lack of sound was a consequence of physical impact on the device:

See also  How to turn on the sound on your computer without speakers

The problem of dirty audio channel is often encountered by iPhone owners who use the phone for more than two years. Dust and other small particles may get into the phone. At first the volume level of sound in the phone decreases and later it disappears at all. This type of failure is accompanied by various wheezing and rustling in the audio channel. If the iPhone parts are not cleaned in time, the failure can lead to more serious consequences. malfunction of the central chip.

Dropping or knocking iPhone can lead to chip failure, that is responsible for audio signal. The only way out. repair iPhone audio codec (re-solder the part) or replace the entire phone motherboard.

One (left) speaker does not work in the iPhone 12, 12 Pro, 11, 11 Pro, XS, XR, X, 8, 7: clarification

With the release of the iPhone 7 and iPhone 7 Plus, “immersive surround sound” is not the least of the important options on Apple’s new smartphones. However, its implementation misleads users who mistake two pairs of decorative grilles at the bottom of the case for a stereo system. And in fact the stereo is not there.

“Pirate.

But there are more unpleasant things. For example, if we are talking about a pirated copy of the iPhone. Buyers often complain about the eternal problems with the work of these gadgets. And they lose sound very often.

What can be done? First, to try all the suggested methods of solution. Most likely, they won’t help. Secondly, if the iPhone copy still has a warranty, you can use it. Just exchange your phone for a new one. It’s worth noting right away. this phenomenon is rare. Often, buyers of fakes remain with nothing.

Then you can only sympathize. And offer not to use fake gadgets in the future. Either you should learn how to work with iPhone without sound, or you should change your phone completely. But no longer on the “pirate”. There’s no other way out.

Starting with the iPhone 4 model, the situation has changed slightly. the speaker and microphone have swapped places, and in the iPhone 5, Apple designers have changed the size and number of holes for the first time.

Speaker and microphone location iPhone 4, iPhone 4s:

Speaker and microphone location iPhone 5, iPhone 5c, iPhone 5s, iPhone SE:

iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus speaker and microphone location:

Proven recommendations if the speaker on your iPhone doesn’t work

In the iPhone 6, iPhone 5s, iPhone 5, iPhone 6s, iPhone se, iPhone 4s, iPhone 4, iPhone 7 plus, iPhone x, iPhone 7, iPhone 2g, iPhone 8, as others have two speakers: top and bottom, and sometimes it happens that 1 speaker does not work, while the second one does.

See also  How to remove SIM card from iPhone

In this case, if one speaker does not work the ear (hearing), that is, talking, and the speakerphone or external (headphones) can work.

There are several reasons and most of them can be solved independently without visiting specialised places.

If both speakers stop working the situation is more complicated, but it can often be solved independently.

It also happens that the speaker works quietly or badly, for example, hoarsely. this situation will also be considered below.

Sometimes you even need to get into the iPhone 5, iPhone 6, iPhone 5s, iPhone 4, iPhone 4s, iPhone 7, iPhone 8, iPhone se, iPhone 5s, iPhone 6 Plus, and so on, but I hope you do not face this future.

NOTE: you will not believe but there is an application that can really make your iPhone speaker work again. I recommend to try it.

The iPhone motherboard malfunction

Usually such problems occur after a hard knock to a hard surface or after a sudden power surge during charging. Due to the fact that the motherboard is responsible for all the processes of the iPhone, any defect in it can lead to sound problems. At home to determine the fault of this damage is almost unreal. If you have tried all the simplest methods, which did not bring results, then most likely it is in the central board. There is only one way out. the service center, but the cost of this service will greatly affect your

What to do if the iPhone has lost sound

Most mute problems are usually caused by the settings on your iPhone. In rarer cases, it may be due to a hardware issue.

Silent mode

Let’s start with the banal: if there is no sound on your iPhone for incoming calls or SMS-messages, you need to make sure that the silent mode is not activated on it. You will notice on the left side of the phone that there is a small switch above the volume keys. If the sound is muted you will see a red mark (shown in the picture below). In order to turn on the sound switch is enough to move it to the right position.

Notification settings

Open any music or video app, play the file, and use the volume key to set the volume to the highest level. If there is sound, but the phone is silent on incoming calls, you probably have the wrong alert settings.

    To edit the notification settings, open the settings and go to the “Sounds” section.
See also  How to change your iPhone account

Connected devices

Your iPhone supports wireless devices like Bluetooth speakers. If a similar gadget was previously connected to the phone, most likely, the sound is transmitted to it.

    This is easy to check. swipe up to the Control Panel and then activate Air Mode (the airplane icon). From this point, the connection with the wireless devices will be severed, which means you’ll need to check whether or not there’s sound on your iPhone.

speaker, working, your, iphone

System failure

iPhone, like any other device, can fail. If there is still no sound on the phone and none of the methods described above has yielded a positive result, we should suspect a system failure.

    First try to reboot the phone.

Headphone malfunction

If the sound from speakers works correctly, but when you connect headphones you hear nothing (or the sound is very low quality), it is likely that in your case the headset itself is broken. It is easy to check this: just plug to the phone any other earphones, which you are sure will work. If there is no sound even with headphones, then you can think about the hardware malfunction of iPhone.

Hardware malfunction

To the hardware malfunction can include the following types of breakdowns:

If the phone was previously dropped in the snow or water, most likely the speakers will work very quietly or stop working altogether. In this case, the device should dry out well, after which the sound should work.

In any case, if you suspect a hardware malfunction, not having the proper skills to work with iPhone components, you should not try to open the case yourself. Here you should go to the service center, where qualified specialists will perform a complete diagnosis and will be able to identify why the phone has stopped working sound.

No sound on the iPhone is an unpleasant, but often solvable problem. If you have previously encountered a similar problem, tell in the Комментарии и мнения владельцев how it was solved.

In addition to this article, there are 12708 other instructions on the site. Add site Lumpics.ru to bookmark (CTRLD) and we will definitely still be useful to you.

iPhone Ear Speaker Not Working? Here’s The Fix!

Thank the author by sharing this article on social networks.