Xiaomi blinks a red indicator and does not turn on

What to do if Xiaomi (Redmi) does not load further than the logo and freezes

If you turned on the Xiaomi (Redmi) smartphone, a logo appeared on the screen, but then it does not load, as if hanging, I have bad news for you. This is a serious problem.

If you just reflash the phone, then the download files or part of the loading memory are damaged. If the firmware is not official, you need to turn to the resource where you downloaded it, they should have instructions on how to roll back the changes, or how to re.Flash the Xiaomi device, which has been hanging on the loading. In most cases, these recommendations work.

xiaomi, blinks, indicator, does, turn

Several reasons that the Xiaomi loads on the logo on the load, without the previous firmware change:

I describe only the most common errors, in reality you need to deal with each phone separately, and it is better to do it in a service center with diagnostic equipment.

Why did the phone stopped turning on?

Xiaomi produces quality products, but it is not safe from various failures in work. After all, any technique is not perfect. From the owners of Xiaomi Redmi 4, for example, there are sometimes complaints that it does not turn on for unknown reasons.

But other models, for example, Xiaomi Redmi Pro and Xiaomi Redmi Note 4, can also upset the user.

When such a nuisance occurs with your device, first of all you need to find out if warranty service is still available. In the case of a guarantee, you can easily solve the issue of a specialist in the official service center. If the device does not turn on on the same day when it was bought, this may be a sign of marriage. In this case, it is necessary to demand to replace the smartphone with a working.

Xiaomi does not turn on

However, our citizens love to save decently, since today there is such an opportunity. This can be the acquisition of a gadget in Chinese online stores, from resellers or used phone. Despite the noticeable advantages in the form of a low price, a similar method is quite risky, since a guarantee is not issued for the product.

It may also just take a guarantee for a smartphone purchased from an official representative. In this situation, count on free repairs, if Xiaomi does not turn on, you do not have to. Therefore, you will have to delve into your apparatus on your own to clarify the cause of the problem in order to eliminate it. But this will not be easy to do non.Specialists, but you can analyze the presence of problems that are most often encountered. The list of problems and methods of their elimination below is relevant for all Xiaomi models, since they are identical in the software plan:

  • The phone was discharged until disconnected. It often happens that the Xiaomi smartphone flashes a red indicator and it does not turn on it itself. This may indicate a complete discharge of the battery. For this reason, the device may not be enough energy reserve in order to launch the system, which makes the power key to the power of the power key. The question is often resolved by installing a phone for charging for about 1 hour, after which you can start again by pressing the power button for 10 seconds. If the device is charged, but does not want to turn on, look at the cable. Perhaps it is damaged, try another cord. Or, for the sake of interest, connect the old cable to another smartphone in order to understand what the problem is. It happens that the device fails in the device, so there is no energy.
  • Hanging the system. The second problem is a software failure that entails a disconnection of a mobile apparatus, it may also prevent the inclusion. If you have an old Xiaomi model with a removable back cover, you need to pull out the battery, then install it again. Thus, a deep reboot of the smartphone is carried out. In gadgets in which the battery cannot be reached, for example, in Xiaomi Redmi 5, for this you need to clamp the power button for 10 seconds. Having performed such actions, you can hope that the phone will still start.
  • Turning button malfunction and other hardware problems. Sometimes the cause may be mechanical damage due to the fall of the device or a possible marriage in production. Own forces are unlikely to help here, you will have to contact the service center. If Xiaomi is turned off and does not turn on, the problem may also lie in a faulty power controller, which is why the gadget cannot gain energy to turn on, you can recognize the problem in this area by connecting to the device of a charged battery.
  • Firmware failure. Sometimes users are faced with a problem such as incomplete loading of a smartphone. That is, the phone turns on, which is confirmed by the tanned screen, but it does not go further. In this case, there is a high probability of malfunctions with firmware. Most likely, you will have to reinstall the software of the device. This can be done using the Mi Flash application, which is coming to all the company’s gadgets, including the Xiaomi Redmi line.
See also  Activate this device Xiaomi what to do

Xiaomi does not turn on, however, it is not a fact that your device will have one of the above problems. Other reasons can cause the impossibility of turning on:

  • Moisture hit the inside of the gadget, as a result of which contacts are oxidized and the system board fails;
  • A sharp difference in temperature indicators in the environment;
  • Faulty battery, you need to buy a new.

When the root of the problem became known, it will be immediately clear whether it is worth it to repair or go to the service center. You can not do without a master in case of serious breakdowns, such as mechanical damage after falling and water leaked into the body. Short.Term malfunctions may also occur as a result of incorrect operation of individual applications. Over, all software problems are treated in two common methods, and we will consider them.

What to do if Xiaomi is not charged

As a rule, such a phone behavior indicates problems with the battery or charge controller. Most likely the phone stopped charging after he completely sat down and turned off. And, if there was a removable battery in our device, we would use the “Frog” type charging and pushed the battery. But Xiaomi has built-in batteries and, even if you remove the battery, use the “frog” due to the connection connector.

In order to get around this problem, you can try to take advantage of this trick:

    Remove the back cover of the smartphone. In some models you will have to unscrew a pair of lower screws, others may have a cover on latches (for example Xiaomi Mi 4). Look for information about the disassembly of your model on YouTube or on the RU website.Fixit.Com

Xiaomi Redmi 4 Pro smartphone removed with the rear cover

If this method did not help, unfortunately, solve the problem on its own and you will have to contact the service center.

Why does the Xiaomi phone do not turn on?

While using the Xiaomi smartphone, a rather unpleasant and, at first glance, incomprehensible situation can happen. The phone turned off does not turn on. What can be the ways to solve this problem and what can it be in general?

Of course, each individual smartphone has problems can be completely different and various factors affect their appearance, but we will consider the most common of them.

The problem is deep discharge

A fairly frequent problem is that the Xiaomi smartphone does not turn on and the red LED flashes. This may indicate a complete discharge of the battery. In this case, the smartphone is not enough energy to launch the system, and therefore, pressing the power button does not lead to the required result.

Solution: Put a smartphone for charging and only after some time (one hour) try to turn it on by long.Term clicking on the power button (seconds 10)

But here there may be a problem. Damaged charging cable. Try to connect another smartphone or any other device to it and see if it will be charged. If necessary, replace the cable.

This also includes a problem with a broken USB port in a smartphone, which will require replacement in the service center.

xiaomi, blinks, indicator, does, turn

The problem is the hovering of the system

The second frequent problem is a failure in the system that turns off the smartphone and does not allow it to turn on normally.

Solution: For smartphones with a removable back cover, you can try to get a battery and install it again on a smartphone, and then try to turn it on. For most, in which the covers are non.Removable, there is another method. A long press on the turning button lasting up to 10 seconds. At the same time, a deep reboot will be made and there is a chance that the smartphone can turn on.

The problem of the breakdown of the inclusion button and other mechanical damage

There are situations when the inability to turn on the smartphone is associated precisely with mechanical damage that occurred when the device falls or as a result of production marriage.

In this case, most likely, you will need to contact the service center to search for a malfunction and eliminate it.

It may also be due to the malfunction of the power controller when the smartphone does not turn on and does not charge. To check this, you must insert a deliberately charged battery into the smartphone and try to turn it on.

Problem of firmware

Very often you can encounter a problem when the screen lights up, but the smartphone is not loading. This is due to the firmware failure failure. To solve this issue, it will be necessary to reinstall software. One way can be the use of the Mi Flash application.

What to do if the Xiaomi smartphone does not turn on

There are often problems with the phone immediately after the purchase or some time after the start of use. In most cases, Xiaomi does not turn on. With the help of several methods of restoration, the gadget may function again. The main thing is to find the cause of Xiaomi malfunction.

The main reasons and solutions

Xiaomi company is engaged in the production of quality products, which in some cases can still fail in work. Xiaomi Redmi 4X receive complaints about turning off the device for unknown reasons. Faults can occur with Redmi 3, Redmi 5 and other models.

When there are problems with the phone, it is necessary to check the warranty service period. With the current guarantee of the problem, the specialist in the service center eliminates.

When the gadget does not turn on on the day of purchase, this may indicate the presence of marriage. In this case, the client should replace the faulty device. When purchasing a product from the reseller, used, from hand or in the online store, there is a risk of non-proceeds in the device for which a guarantee is not issued.

See also  How to remove the SIM card from the Xiaomi

In this case, you can not count on free repairs. Problems can be eliminated independently if they relate to common problems characteristic of all Xiaomi models.

In addition, the phone does not turn on due to a sharp difference in temperature, a faulty battery or moisture from getting into the gadget, in which contacts are oxidized and a breakdown of the system board occurs.

SIM card can become source of problems. To check the service of the phone, it is removed and the device is turned on again.

If the phone works, then check the SIM card. Plaque or oxides can close contacts. The contact group can be cleaned with an eraser or a cotton wool with alcohol. If these actions did not help, then check the slot for the SIM card. Okisls may also be present on it, deformation of the elements is not excluded. They are straightened and turn on the phone with a SIM card. In some cases, SIM card replacement is required.

Xiaomi Note 4x or Pro is often not turned on due to a damaged train. Over time, it fades and does not turn on the phone. Most often this happens in a place with a high load. A train from the battery or USB. The integrity of the wires is checked by removing the lid and the protective casing.

If there is a rupture of the network, then the contacts are cleaned, soldered and isolated. A train can be purchased in a store and replaced. When the experience of repairing such devices is absent, they contact the service.

Deep charge of the battery

For smartphones, you use batteries. Which are made of lithium, with a built.In charging controller. He covers the fishing line for the electric power supply of the battery during deep discharge. This function is necessary to protect the device from reducing the container below the permissible value, after which the battery stops working.

For this reason, the phone does not start when connecting a charger. In this case, a red indicator blinks, but there are situations when a burning light blinks white in white.

To solve the problem is necessary:

How to Fix Your Xiaomi TV That Won’t Turn On. Black Screen Problem

  • Connect the gadget to another more powerful charger;
  • Charge the battery from a power source in 5 V with a current limitation of up to 300-350 mA;
  • Leave the phone to charge for 1-6 hours, which is enough to withdraw a device from deep charge.

The dismantling of the Batter in Xiaomi models with non.Removable lids is recommended to be entrusted to a specialist. Due to the incorrect disassembly, the phone may be completely spoiled. If the user has experience, then you can remove the back cover, acting according to the instructions.

Faulty cable

In Chinese devices, the length of the plug can be less than the required indicator. In this case, the contacts will not be accessed to the conductors of the phone.

Often the power cord is not connected to the end, trying not to harm the new device. The plug must be pressed stronger so that the phone begins to charge, but not overdo it with this. If the cable often flies out of the phone, then soon the device stops working.

Error in the work of software

  • The work of applications with malicious viruses;
  • Failure of the operating system during loading;
  • Installation of TWRP;
  • Shutdown of a smartphone when installing update.

To solve problems use forced rebooting. To do this, press the power button, holding it for about 10 seconds. At the same time, the phone vibrates, the screen lights up. In addition, reloading from the service menu will help.

To enter the engineering menu, you must simultaneously press the power buttons and the volume controller up. After that, the device is turned off and turned on again. The gadget will come to the non.Working state when the settings are set in the Service Recovery mode.

If the phone begins to hang, then they also use a deep reboot. In the old model, you can remove the lid, pull out the battery, insert it back and turn on the device. With Xiaomi Redmi 5 come differently. You can’t remove the cover in it, so click the Turning button for 10 seconds. After that, the phone is no longer hanging.

Reset

The problem of turning off the gadget can be solved in this way, which has a significant drawback. During the procedure, all information will be deleted from the phone, in t. H. Contacts. For this reason, before returning to factory settings, you need to use backup data and pull out a memory card from the slot.

  • Press and hold the power button and the volume controller until the Mi5 screensaver appears on the display;
  • Hold the volume control key;
  • Enter the recovery and find English;
  • Click Hard Reset.

Replacement of cable and/or charger

For charging, it is important to use an original cable and a memory from a kit or a high.Quality alternative. Low.Quality cables and chargers do not provide the necessary power to remove the battery from a state of deep discharge. If the cable and charging are original, connect a different memory to eliminate the breakdown of the charger.

USB contacts are broken

With gross and not accurate handling of the phone when connecting the USB cable, the internal structure of the USB nest is disturbed, which leads to close, loss of the necessary contact or physical destruction.

Check the serviceability of the USB nest at home, you can connect to it a deliberately working and serviceable charger.

If the red indicator goes out, it’s not about the nest. If not, then there is a probability that it failed, especially if you have suspicions of its integrity during a visual examination.

See also  How to return an old version of android

You can repair contacts or change the nest in the conditions of the repair service and only if you have the necessary tools. Don’t do it at home.

The main reasons and their decision

I have been working with Xiaomi technique for a long time and I want to note that the products of this company are quite high quality. At least no worse than competitors. There are successful models, there are not very successful models. So, for example, many owners complain that Xiaomi Redmi 4x sometimes turn off on their own and the reason for these offs is not clear. Therefore, I repeat. Not one of the models is safe from errors of engineers and technical marriage. If the device still has a warranty, then you can hope for free repair or even replacement of the gadget. If you are faced with the fact that the Xiaomi phone does not turn on a few days after the purchase, then you can try to return it to the seller. But if you took it with your hands, then in this case you will have to repair it at your own expense.

Let’s look at the most common cases when Xiaomi Redmi turned off and does not turn on. Before that, you did not drown it or dropped it. What to do? Start with the battery.

Deep discharge of the battery

Modern smartphones use lithium batteries with a built.In charging controller, which overlap the fishing line for a trimmer of electric power supply for the battery when completely discharged. This is done in order to protect the battery from reducing the container below the permissible value, after which it will simply stop working. That is why the phone does not turn on immediately when connecting the charger.

It is worth paying attention to whether the red charge indicator blinks at this time on the phone (on some models it can be white). It is worth waiting for at least 30-40 minutes and only after that try to press the power button. In some cases, to withdraw the device from deep discharge, you must wait a few hours.

Faulty cable or charger

For many owners, the charging cable walks for about six months, after which they begin to alternate. In addition, the length of the cable is not always enough and it is connected by “innature”. Over time, damage appears, several times even met cases when the plug broke and hung on thin wires, as on

Xiaomi chargers are quite high.Quality and have been going on for at least a year, but still sooner or later they fail. At the same time, outwardly on it you will not find any traces-you just turned off and that’s it. And again, a person will assume that the phone is charged, but in fact. No. As a result, when trying to turn it on, he will find that his Xiaomi Redmi does not turn on and does not respond to pressing the Power button. So the advice here is simple: when there are problems with the inclusion of a smartphone, try another charger and cable. Believe me. In 80% of cases the problem is solved at this stage!

Phone Wont Turn On: Black Screen, Blinking RED Light. The Red Light Of Death | Fixed | Get Fixed

The SIM card is buggy

Yes, imagine-an ordinary SIM card can become source. Therefore, I would advise her to extract and try to turn on your Xiaomi without SIM card. If the smartphone works, check the SIM card in another device. It may have contacts and this leads to a closure. If dirt, plaque or oxidation is visible with the naked eye. You can clean the contacts with an ordinary eraser or a cotton swab with moistened alcohol. If the phone does not turn on without a SIM card. Then it is worth checking the slot. True, for this, the device will have to disassemble. In my memory there was a case when the trash that hit the garbage bent the contacts in the slot and they closed.

Problems with firmware

The reason for the problems with the inclusion of Xiaomi phones may be a software failure: unsuccessful flashing, failure during the operating system loading, installation of TWRP, the result of malicious programs. True, most often on the screen there may be some messages, icons. Then you should try to go to the engineering menu of the device, holding the closed button on and the volume increase button of more than 10 seconds. If you succeeded, you can try to reset Xiaomi settings through the so.Called Hard Reset.

The phone does not load after flashing or updating

Sometimes the cause of failures of the smartphone is users themselves. Anyone can violate the system if it tries to update it from third.Party sources. The smartphone will stop working if you install incorrect firmware on it. This is due to the mismatch of IMEI (factory identification number of the device) in the OS and the actual, prescribed in the internal system.

To solve this problem, contact the official Xiaomi Center. In such cases, third.Party workshops are not suitable. Workers may turn out to be unscrupulous and establish incorrect in. Because of this, problems may arise after updating. In official service centers, IMEI is checked before installing a new firmware and installed only licensed versions of Android and Miui.