Zont Smart Connection of temperature sensors. Thermostat settings settings…

The thermostat Zont H-1 is designed for remote control and control of the heating boiler. Setting the operating modes and control of the thermostat is carried out through the GSM channel and via the Internet. The device automatically, in accordance with the specified parameters, regulates the operation of the boiler in heating mode so that the specified temperature remains in the room. The thermostat can control the technical condition of the boiler and signal the malfunction when an accident occurs or off the supply voltage.

The thermostat can operate in two boiler control modes: relay regime (control through the boiler terminals designed to connect a room thermostat) and in the OpenTherm control mode (connection must be performed to the electronic board of the boiler supporting this protocol through the special adapter OpenTherm).

Under the lid of the case are: 12. SIM card holder slot 13. Serial number 14. s/diode GSM signal 15. C/diode of the boiler 16. C/Diode Power 17. Off. reserve nutrition

Functionality

Automatic notification of events

Recording and storing the history of events

Zont Smart. GSM module of remote control of the heating boiler

Zont Smart, in accordance with the specified parameters, automatically adjusts the operation of the boiler in heating mode so that the specified temperature is preserved in the room. It controls the technical condition of the boiler and signals about its malfunction when an accident occurs or off the power voltage. Management commands, setting up operating modes and data transmission of the operating parameters of the boiler and controller are carried out through the GSM channel and via the Internet.

Control of the state and management of the boiler through the web service and the Zont mobile application

  • Display of the current condition of the boiler;
  • Display of the current and target temperature in the room (coolant);
  • Creation of individual operating modes of the boiler (up to 10 different modes);
  • Monitoring of the measured temperatures (air, coolant, DHW);
  • Programming the work of the boiler according to a weekly schedule;
  • Control of the state of additional sensors (leaks, pressure, gas leakage, security trips).
  • with the deviation of the current temperature from the threshold values ​​set by the mode of operation;
  • in the accident and malfunction of the boiler;
  • in case of malfunction of connected temperature sensors;
  • upon loss and when restoring the main voltage of the supply (network);
  • When the additional security sensors are triggered (the “security alarm” function.

Recording and storing the history of events (over the past 3 months)

  • the operating time of the boiler and monitoring of the measured temperatures;
  • the time of the appearance of accidents and errors in the operation of the boiler;
  • the time of loss and restoration of the main voltage of the supply;
  • time of incoming calls and the text of incoming SMS messages;
  • The date of update software and the number of the current version of.

Remote updating the software version update the version of the thermostat via the Internet from the personal account of the web service without connecting additional equipment.

Attention! When food from a backup battery, the thermostat does not control the boiler!

Zont Smart 2.0. Flagship device in the line of thermostats and heating controllers!

4 intended and 6 freely programmable operating modes of the device make it possible to establish the operation of boilers according to the schedule, street t ° (weather.dependent control) and time of day. Management 2 boilers (main and backup) will provide your system with heat, regardless of accidents and other undesirable events.

The “Antimproduction” function will prevent freezing of the coolant in the pipelines of the heating system. The Summer Function Algorithm will automatically disconnect the operation of the boiler when the specified plus value of the street temperature is reached to save energy resources.

Dear boiler controls is possible both directly and through electronics of the heating boiler (when using a double.circuit heating boiler). The use of the function of “anti.legionella” will prevent the development of harmful bacteria.

Zont Smart 2.0 in 24/7 mode from anywhere in the world provides:. Control and control of the operation of boilers (in relay mode and on the digital tire Opentherm, E-Bus/Ariston, Navien, BSB (Baxi)). Control and management of the work of executive devices (DHW boiler, servo drive, thermal head, pump, etc.). Network voltage control. control and assessment of the state of security sensors (water leak, gas leak, smoke, movement, opening, etc.). sending instant messages about all deviations from the specified parameters. instant signaling of the operation of connected security sensors. immediate notification of accidents and mistakes of the boiler.

Convenience of management:. Personal account on the Zont web service with the possibility of providing access with various rights for several users (for example, a service specialist, another family member). Free zont mobile application on iOS and Android with a rating of 4.5 and the number of downloads more than 100.000. A room panel for manual management of operating modes and temperature values ​​of Zont ML-753.

It is accessible to create special web cases in your personal account for quickly turning on/off the work of executive devices.

Update for accessible through the personal account of the web service without connecting the device to the computer.

Zont Smart 2 controller.0 is always in touch! GSM and Wi-Fi data transfer channels-choose convenient. Wi-Fi channel priority, GSM is a reserve channel connected when the Wi-Fi communication is lost when electricity is turned off for up to 12 hours and transfers information from wired sensors connected to it (reserve battery in the kit).

Security and comfort functions:. Connection of traffic sensors (taking into account the size of large animals), breakdown of the window, opening doors with the possibility of triggering an executive device (for example, siren), transmitting information to the security department, etc. Connecting sensors of water leakage, humidity, gas leakage, smoke accounting, pressure. Connection of Webcamer.

Convenience of installation and placement:. The device is attached both on the wall and on the DIN-rack. Support for digital and analogue temperature sensors NTC. Using a weather server in Pza and Summer modes. Support for analog pressure sensors up to 12 bar, 0-5 in. Connecting radio digits operating at a secure frequency of 868 MHz (up to 120 pcs.)

Important! Analog water pressure sensor, gas is connected without a special adapter!

With a professional heating controller Zont Smart 2.0:. You can be sure of the heating system;. You care about households during your absence;. You save on energy carriers from 30%!

Please note that the equipment of devices produced before March 1, 2022., The digital sensor enters. Our website presents new devices complete with analog temperature sensors NTC.

Package

Package

Zont Smart 2.0 heating controller

Zont Smart 2.0. Flagship device in the line of thermostats and heating controllers!

With Zont Smart 2 controller.0 your home is always comfortable temperature and hot water!

4 intended and 6 freely programmable operating modes of the device make it possible to establish the operation of boilers according to the schedule, street t ° (weather.dependent control) and time of day. Management 2 boilers (main and backup) will provide your system with heat, regardless of accidents and other undesirable events.

The “Antimproduction” function will prevent freezing of the coolant in the pipelines of the heating system. The Summer Function Algorithm will automatically disconnect the operation of the boiler when the specified plus value of the street temperature is reached to save energy resources.

Dear boiler controls is possible both directly and through electronics of the heating boiler (when using a double.circuit heating boiler). The use of the function of “anti.legionella” will prevent the development of harmful bacteria.

Zont Smart 2.0 in 24/7 mode from anywhere in the world provides:. Control and control of the operation of boilers (in relay mode and according to the digital tire Opentherm, E-Bus, Navien). Control and management of the work of executive devices (DHW boiler, servo drive, thermal head, pump, etc.). Network voltage control. control and assessment of the state of security sensors (water leak, gas leak, smoke, movement, opening, etc.). Sending instant messages about all deviations from the specified parameters. instant signaling of the operation of connected security sensors. immediate notification of accidents and mistakes of the boiler.

Convenience of management:. Personal account on the Zont web service with the possibility of providing access with various rights for several users (for example, a service specialist, another family member). Free zont mobile application on iOS and Android with a rating of 4.5 and the number of downloads more than 100.000. A room panel for manual management of operating modes and temperature values ​​of Zont ML-753 or Zont ML-732.

It is accessible to create special web cases in your personal account for quickly turning on/off the work of executive devices.

Update for accessible through the personal account of the web service without connecting the device to the computer.

Zont Smart 2 controller.0 is always in touch! GSM and Wi-Fi data transfer channels-choose convenient. Wi-Fi channel priority, GSM is a reserve channel connected when the Wi-Fi communication is lost when electricity is turned off for up to 12 hours and transfers information from wired sensors connected to it (reserve battery in the kit).

Security and comfort functions:. Connection of traffic sensors (taking into account the size of large animals), breakdown of the window, opening doors with the possibility of triggering an executive device (for example, siren), transmitting information to the security department, etc. Connecting sensors of water leakage, humidity, gas leakage, smoke accounting, pressure. Connection of Webcamer.

Convenience of installation and placement:. The device is attached both on the wall and on the DIN-rack. Support for digital and analogue temperature sensors NTC. Using a weather server in Pza and Summer modes. Support for analog pressure sensors up to 12 bar, 0-5 in. Connecting radio digits operating at a secure frequency of 868 MHz (up to 120 pcs.)

Important! Analog water pressure sensor, gas is connected without a special adapter!

With a professional heating controller Zont Smart 2.0:. You can be sure of the heating system;. You care about households during your absence;. You save on energy carriers from 30%!

The manufacturer reserves the right to change the characteristics, appearance, completion of the goods and the place of its production without notifying the dealer.The specified information is not a public offer

Zont Smart Connection of temperature sensors

New model of the Zont Smart device line

For convenience, free applications for iOS and Android mobile devices are recommended, as well as a web service with access through your personal account. To protect against unauthorized access, the entrance to the Personal Account is protected by password.

  • 2 types of GSM data transfer (mob.Internet) and wi-fi
  • New software
  • A new processor for increasing the speed and functionality of the device
  • 3 analog input for connecting additional equipment
  • Support for analogue temperature sensors NTC
  • Support for analog pressure sensors 5-12 bar 0-5 V
  • Support for simultaneous operation 15 wired and 120 radio channel temperature sensors
  • Updated Personal Account Protection with a password and demarcation of user rights
  • Attached to any surface and din-rack.

Control of the state and management of the boiler through the web service and the Zont mobile application

  • display of the current condition of the boiler;
  • display of the current temperature in the room;
  • the choice of pre.installed operating modes to maintain the target temperature (air or coolant);
  • temperature monitoring;
  • Programming the work of the boiler according to a weekly schedule;
  • Control of the state of additional sensors.
  • with the deviation of the current temperature from the specified threshold values;
  • in case of malfunction of connected temperature sensors;
  • when disappearing/ restoring the main voltage of the supply (network);
  • the operating time of the boiler and monitoring of the measured temperatures;
  • the time of loss and restoration of the main voltage of the supply;
  • The time of incoming calls and the text of incoming SMS messages

The obvious benefits of such control. the thermostat does not turn on and off the boiler, but constantly and smoothly changes the calculated temperature of the coolant and transfers it to the boiler for (modulates its power), “adapting” to the current need for heat, that is, to the actual heat losses of the room. The thermostat constantly calculates how exactly the actual temperature deviated from the given, and the more this difference, the greater the calculated temperature of the coolant, it commands to develop the boiler. For the boiler and for the efficiency of the heating installation as a whole, this is much better than simple periodic inclusion and off: it is economically much more profitable to work on low power to reduced power. In addition, the connection to the internal protocol of the boiler gives remote access to its parameters and provides automatic monitoring of the technical condition. Thus, in case of a malfunction or accident of the boiler, the thermostat fixes the error code and transmits information for display in the web service.

To connect Zont equipment to heating boilers via OpenTherm digital tire

List of boilers with digital tire of Opentherm: Buderus; Beretta; Ferroli; Baxi; De Dietrich; Thermona; Lamborghini; Bosch; Viessmann; Lemax; Fondital; Immergas; Wolf; Baltur; Electrolux; Federica Bugatti; Geffen and others.

The digital tire control provides:- smooth control of the boiler power,- control of the operating parameters of the boiler,- a change in heating temperature settings and GVC indication of accidents and errors.

To connect Zont equipment to heating boilers via E-Bus digital tire

List of boilers with digital tire E-Bus: Vaillant; Protherm and others.

The digital tire control provides:- smooth control of the boiler power,- control of the operating parameters of the boiler,- a change in heating temperature settings and GVC indication of accidents and errors.

To connect Zont equipment to heating boilers via Navien digital tire

List of boilers with digital tire Navien: Navien.

The digital tire control provides:- smooth control of the boiler power,- control of the operating parameters of the boiler,- a change in heating temperature settings and GVC indication of accidents and errors.

Zont Smart 2.0

Features of the Zont Smart 2 model.0

  • 2 types of GSM data transfer (mob.Internet) and Wi-Fi;
  • New software;
  • A new processor for increasing the performance and functionality of the device;
  • 3 analog input for connecting additional equipment;
  • Support for analog temperature sensors NTC;
  • Support for analog pressure sensors 5-12 bar 0-5V;
  • Support for simultaneous operation of 15 wired and 120 radio channel temperature sensors;
  • Updated Personal Account Protection with a password and demarcation of user rights.

GSM-modem heating controller connected to the heating boiler. Teams can be transmitted to it from any phone, tablet or PC. For ease of work, there are free applications for iOS and Android mobile devices, as well as the personal account of the web service.

To protect against unauthorized access, the entrance to the Personal Account is protected by password. The device provides for setting up 10 different heating modes of the house, in t.h. on schedule, temperature on the street (PZA) and time of day. The device controls the technical condition of the boiler and signals during the accident or disconnecting the supply voltage. In case of deviation of values ​​from the given values, he informs the owner in any selected way.

Zont Smart 2.0 easily connected to an electric or gas boiler instead of a room thermostat. A SIM card of any operator providing a stable technique is inserted into it, the supply voltage is supplied and the temperature sensor is connected. The controller automatically controls the operation of the boiler and informs the owner in all available ways.

The controller, for its main basic purpose, is a simple indoor thermostat, but only made on a hardware platform using GSM/GPRS modem and Web technology. The principle of its operation and the method of connecting to any gas or electric boiler is exactly the same as that of ordinary thermostats. The Zont Smart controller connects to the standard connector for a room thermostat and controls the boiler, supporting the given temperature according to the readings of its temperature sensor. To do this, the controller turns on or off the boiler, closing the contacts of its output relay.

Thus, if your boiler provides for the possibility of managing commands from indoor thermostat, then the Zont Smart controller can be used with it.

Zont Smart Connection of temperature sensors

6 additional controls in large facilities, where several structures can be covered by a system of automation, the hardware capabilities of the Zont H2000 controller may not be enough. Therefore, to control the analogue temperature sensors and other information sensors, it is convenient to apply the ZE-66 extensions modules.

6 of additional controlled outputs for controlling various executive mechanisms and electrical devices for the operating controller of the work algorithm, the ZE-66 expansion module uses universal outputs through intermediate relay. Reference. The control winding is 12V, the maximum current. corresponds to the load current of 30%.

The ZE-66 expansion module has 6 built-in relay (rated switching current 7a, switched voltage DC Max. 28V, AC Pikovy 240V) and uses them for direct management of various performing mechanisms and electrical devices.

Entrance for digital temperature temperature sensors of temperature monitoring and its values ​​in the control algorithm for heating systems located at a large distance from the Zont H2000 controller, an additional 1.wire integration is implemented, which controls digital temperature sensors.

zont, smart, connection, temperature, sensors, thermostat

ZE-66 is connected to the H2000 controller through the RS-485 integer.Standard range of module installation from the controller up to 200 m.At high distances, it is recommended to install additional 120 Ohms resistors between the RS-485A and RS-485B terminals from both ends of the line and use a special twisted pair of CAT5.

With good operation, the indication on the ZE-66 extension module is as follows:

The OpenTherm adapter (724) is designed to connect any thermostats and Zont controllers to gas boilers through the OpenTherm digital tire. Compatible with boilers supporting the OpenTherm Inte Wee.

  • full.time operation of the power modulation function of the boiler,
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.
  • Simultaneous connecting to the Zont thermostat boiler (129 and above) and standard remote panels is allowed. At the same time, it is supported: manual control from the panel and remote control of the Zont service.
  • Simultaneous connection to the Zont controllers and standard remote panels is allowed. It is supported: Remote control of the Zont service, and the parameters are only displayed on the staff panel (you cannot control from the panel).

The E-Bus adapter (725) is designed to connect any thermostats and Zont controllers to gas boilers through the E-Bus digital tire. Compatible with boilers supporting the E-BUS integer.

Подключить и настроить Zont Smart 2.0

  • full.time operation of the power modulation function of the boiler,
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.

Connection to the internal protocol provides control of the technical condition of the boiler, if a malfunction or accident occurs, the thermostat transmits information in the chosen way (through the Web service, calls, SMS).

Navien adapter (728) is designed to connect any thermostats and Zont controllers to gas boilers via Navien digital tire. Compatible with boilers supporting the Navien interaction.

  • full.time operation of the power modulation function of the boiler,
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.
  • full.time operation of the power modulation function of the boiler;
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.
  • full.time operation of the power modulation function of the boiler;
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.

Navien digital tire board is designed to connect the Zont Climatic controller to gas boilers via Navien digital tire.

  • full.time operation of the power modulation function of the boiler;
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.

The OpenTherm Eco (763) adapter is used to connect the thermostats and Zont controllers to boilers operating on the OpenTherm digital protocol.

The adapter E-Bus Eco (764) is used to connect the thermostats and controllers of Zont to gas boilers operating on the digital protocol E-Bus.

Designed to increase the number of inputs/outputs of the Zont H2000 controller provides data exchange with a controller on the local network Ethernet or the RS-485 and K-Line integrates control and information sensors for various purposes supports the connection of digital and analogue temperature sensors controls the work of relay and universal outputs

Adds controlled mixing contours to the Zont Climatic 1 regulator.3 Provides the exchange of data with the regulator by the RS-485 integration supports the connection of digital wired temperature sensors

Wended NTC temperature sensor in a plastic case Scope:. measuring air temperature indoors

Wended NTC temperature sensor in a plastic case Scope:. measurements of street air temperature

The Opentherm Eco (763) adapter is designed to connect any thermostats and Zont controllers to gas boilers via OpenTherm digital tire. Compatible with boilers supporting the OpenTherm Inte Wee.

  • full.time operation of the power modulation function of the boiler,
  • Installation of heating temperature and DHW,
  • Control of the operating parameters of the boiler,
  • indication of accidents and errors.
  • Simultaneous connecting to the Zont thermostat boiler (129 and above) and standard remote panels is allowed. At the same time, it is supported: manual control from the panel and remote control of the Zont service.
  • Simultaneous connection to the Zont controllers and standard remote panels is allowed. It is supported: Remote control of the Zont service, and the parameters are only displayed on the staff panel (you cannot control from the panel).

Zont Smart

A controller for any heating boiler with the possibility of monitoring its work and remote control via the Internet and cellular communications. Teams can be transmitted to it from any phone, tablet or PC.

For convenience, free applications for iOS and Android mobile devices are recommended, as well as a web service with access through your personal account. To protect against unauthorized access, the entrance to the Personal Account is protected by password.

Characteristic: controls the temperature of the air/coolant/street by the boiler in weather-dependent mode and with a PID regulator controls for various purposes radio operators, it led the power outage and other events.h. according to the schedule) is ideal for gas and electrical boat is on any surface and a DIN-rack.

Control of the state and management of the boiler through the web service and the Zont mobile application

  • display of the current condition of the boiler;
  • display of the current temperature in the room;
  • the choice of pre.installed operating modes to maintain the target temperature (air or coolant);
  • temperature monitoring;
  • Programming the work of the boiler according to a weekly schedule;
  • Control of the state of additional sensors.
  • with the deviation of the current temperature from the specified threshold values;
  • in case of malfunction of connected temperature sensors;
  • when disappearing/ restoring the main voltage of the supply (network);
  • the operating time of the boiler and monitoring of the measured temperatures;
  • the time of loss and restoration of the main voltage of the supply;
  • The time of incoming calls and the text of incoming SMS messages

The obvious benefits of such control. the thermostat does not turn on and off the boiler, but constantly and smoothly changes the calculated temperature of the coolant and transfers it to the boiler for (modulates its power), “adapting” to the current need for heat, that is, to the actual heat losses of the room. The thermostat constantly calculates how exactly the actual temperature deviated from the given, and the more this difference, the greater the calculated temperature of the coolant, it commands to develop the boiler. For the boiler and for the efficiency of the heating installation as a whole, this is much better than simple periodic inclusion and off: it is economically much more profitable to work on low power to reduced power. In addition, the connection to the internal protocol of the boiler gives remote access to its parameters and provides automatic monitoring of the technical condition. Thus, in case of a malfunction or accident of the boiler, the thermostat fixes the error code and transmits information for display in the web service.

Подключаем GSM Термостат ZONT SMART. что нужно знать, основные особенности подключения.

To connect Zont equipment to heating boilers via OpenTherm digital tire

List of boilers with digital tire of Opentherm: Buderus; Beretta; Ferroli; Baxi; De Dietrich; Thermona; Lamborghini; Bosch; Viessmann; Lemax; Fondital; Immergas; Wolf; Baltur; Electrolux; Federica Bugatti; Geffen and others.

The digital tire control provides:- smooth control of the boiler power,- control of the operating parameters of the boiler,- a change in heating temperature settings and GVC indication of accidents and errors.

To connect Zont equipment to heating boilers via E-Bus digital tire

List of boilers with digital tire E-Bus: Vaillant; Protherm and others.

The digital tire control provides:- smooth control of the boiler power,- control of the operating parameters of the boiler,- a change in heating temperature settings and GVC indication of accidents and errors.

To connect Zont equipment to heating boilers via Navien digital tire

List of boilers with digital tire Navien: Navien.

The digital tire control provides:- smooth control of the boiler power,- control of the operating parameters of the boiler,- a change in heating temperature settings and GVC indication of accidents and errors.

Zont Smart

GSM-modem heating controller connected to the heating boiler. Teams can be transmitted to it from any phone, tablet or PC. For ease of work, there are free applications for iOS and Android mobile devices, as well as the personal account of the web service.

To protect against unauthorized access, the entrance to the Personal Account is protected by password. The device provides for setting up 10 different heating modes of the house, in t.h. on schedule, temperature on the street (PZA) and time of day. The device controls the technical condition of the boiler and signals during the accident or disconnecting the supply voltage. In case of deviation of values ​​from the given values, he informs the owner in any selected way.

Zont Smart easily connects to an electric or gas boiler instead of a room thermostat. A SIM card of any operator providing a stable technique is inserted into it, the supply voltage is supplied and the temperature sensor is connected. The controller automatically controls the operation of the boiler and informs the owner in all available ways.

The controller, for its main basic purpose, is a simple indoor thermostat, but only made on a hardware platform using GSM/GPRS modem and Web technology. The principle of its operation and the method of connecting to any gas or electric boiler is exactly the same as that of ordinary thermostats. The Zont Smart controller connects to the standard connector for a room thermostat and controls the boiler, supporting the given temperature according to the readings of its temperature sensor. To do this, the controller turns on or off the boiler, closing the contacts of its output relay.

Thus, if your boiler provides for the possibility of managing commands from indoor thermostat, then the Zont Smart controller can be used with it.